Can someone please help I am trying to calibrate the print and cut feature and can't find out how to print this page
Thanks in advance
Barbara
Barbara if you are using Studio V3 click on the last icon on the top right (a Cameo). On the next screen right click and a box appears. Scroll down and click on calibration. The calibration page appears. Click on print test page.
Barbara if you are using Studio V3 click on the last icon on the top right (a Cameo). On the next screen right click and a box appears. Scroll down and click on calibration. The calibration page appears. Click on print test page.
Thanks Magaret.....no wonder I didn't understand I've never had to do that with my machine so wouldn't have been any help
Barbara if you are using Studio V3 click on the last icon on the top right (a Cameo). On the next screen right click and a box appears. Scroll down and click on calibration. The calibration page appears. Click on print test page.
I am using the latest version 4.0.623 ssde.
But since upgrading I cannot connect to cameo I have run the repair but still it won't connect any suggestions?
The latest version is 4.0.820 Barbara. Have you tried turning everything off unplugging everything and leaving it for a while including your pc then plugging it all back in and starting again to see if that works if it doesn't try another usb port.
But since upgrading I cannot connect to cameo I have run the repair but still it won't connect any suggestions?
If the problem continues please try going back to v3 to see if the machine connects again with that version. There is nothing in v4 that I'm aware of that would cause connection problems so it would be worth rolling back to v3 to confirm if this is specifically a v4 problem.
Thanks for the help. It now says 'Auto connection released' and when I go into settings, preferences is greyed out.
And sorry for being a pest but how do roll back to version 3
Before going back to v3 try this. Open v4, go to Edit menu > Preferences > Advanced and click the 'Restore Factory Defaults...' button, then click OK. Then close the software down and restart it, then give it another try.
Thanks for the help. It now says 'Auto connection released' and when I go into settings, preferences is greyed out.
And sorry for being a pest but how do roll back to version 3
Barbara
Barbara you have to uninstall V4 and install the last V3. It is on the Silhouette software page under legacy software.
I always download and 'save as' each version of Studio and put it in a folder in my documents named Silhouette Software. Then I double click to open it. Advantage is if I do an upgrade I have problems with I can always delete and go back to that folder and reinstall which ever version I want.
Make sure your Silhouette is plugged in and switched on. Then in the new v4 software, select the SEND tab and then right-click on the image of the machine (I've marked it with a red 1.), then select Calibration (2.) and then click on the Print Test Page (3.).
You can also find tutorials on how to calibrate the machine by going to the Help menu > Tutorials and then viewing both the 'Calibration - Print & Cut' and the 'Calibration - Distance Adjustment' tutorials.
Bookmarks