|
Donate with PayPal to help keep UKS online!
-
Thank you Brian. Busy this morning so will give it a go after lunch.
-
Dedicated Scrapper
-
This was more complex than I remember. Firstly you need to extract the files from the downloaded folder. next you need to make sure that the curio platform is in place when you power up and link to your computer with the USB. At one stage you have to remove the power cable then hold the on button in for 5 seconds until it begins to flash. As I had made the mistake of putting my curio on the floor rather than a table I failed the first time. Second attempt I put it on my knee and could see the screen and press the right buttons.
-
Dedicated Card Maker
- Limited Sponsor -
Thanks Brian - all up and running.
-
Dedicated Scrapper
Originally Posted by BrianP
Just a quick heads up to the Curio owners here, Silhouette have released an updated firmware for the Curio, this takes the firmware from v1.08 to v1.20, so it should contain a few fixes & optimisations. You can find the firmware at the link below, the firmware upgrader provides clear & simple instructions but let me know if you have any questions, I've just done the update here and it all went smooth & only took a couple of minutes. Just make sure you close Studio before running the firmware installer.
http://www.silhouetteamerica.com/firmware
Thanks Brian.
We have been away again for 10 days so only just catching up now.
-
Graphtec GB
I've been having a play with the new etching sheets today and you can get some nice effects with them, the etched text has a very nice sparkle to it.
JD_etch2.jpg
JD_etch1.jpg
-
Dedicated Scrapper
Wow that looks great thanks for showing us Brian
-
Wow is all i can say. Thanks for sharing.
-
Graphtec GB
A bit more Curio work today, this time I was cutting leather and testing etching tools, so knocked myself together a handmade leather keyring. Not bad for first attempt.
keyring1.jpg
-
Dedicated Scrapper
It looks great Brian, is that real leather or the faux leather that Graphtec sell on a roll?
-
Graphtec GB
That is real leather, we have been testing the deep cut blade, and that was cut at a blade setting of 13.
-
Dedicated Card Maker
- Limited Sponsor -
-
Dedicated Scrapper
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
Bookmarks