Thank you to everyone for the great designs and for sharing them.
Here is mine a celtic theme, delicate so handle carefully when lifting off the carrier sheet. I couldn't find my bit of vinyl, so had to use printer paper. I couldn't help but notice how many of the corners shared would also make lovely frames so my screen shot shows them as a frame and 1 corner on it's own.
this is the file from the very 1st post, as I wanted to add to the 1st post, and, there was not enough room, so hence this has been moved down here.
The file has 2 peel offs 1 is solid, or can be cut from card, a punch/stencil one, and a frame.
Last edited by cattiegracie; 25-01-2012 at 01:54 PM.
Reason: changed name
I really wanted to have a go at this one, but just couldn't seem to come up with anything that worked. So I decided to have a look for a font & came across one call "CornPop" & thought I'd give a go, hopefully only having to do a little bit of tweaking. WELL - what a mistake!
There were so many stray lines, dots, debris, etc. etc. that it would probably have been easier to keep wracking my brain to come up with something by myself. I decided that it would a good chance to practise my node editing & persevered long enough to do the ones that I've attached here before it became a case of stop - or end up pulling out all of my hair!
There's a couple I will definitely use in the future, so I suppose it was kind of worth it. They all cut really well & quickly (with no juddering) on the green vinyl (ratchett blade 1, speed 10, thickness 8) & the smaller you do them the more careful you need to be lifting them off where the fine bits are. I didn't use any transfer tape, so if you've got the patience to bother with it they should transfer over just fine.
I've welded each indivdual corner, so there shouldn't be any need to install the font unless you want to. Speaking of which, I'm now going to delete it from my system as I can't even bear the thought of ever coming across it again!!!
Hope they're of use to someone.
Karen
Bookmarks