|
Donate with PayPal to help keep UKS online!
-
thanks for that Lucille - i will give that a go this afternoon and let you know what happens. if it doesn't work then i think have to assume i need a new blade!
Thanks again to everyone for all your kind feedback - so helpful! xx
-
Dedicated Scrapper
Originally Posted by Frankie_d18
hi Doreen ,
yes, i have ride altering the pressure with multiple cuts - have also tried the tin foil trick! I think i am going to have to call graphtec first thing tomorrow !
I have also tried different paper at alternative pressures - nothing seems to cut all the way through - no matter what!
If you do need to call Graphtec this is the number 01978666700
-
Probably a daft question, but have you actually got the blade locked into place properly in the holder?
-
Dedicated Scrapper
- Limited Sponsor -
Hi Frankie and welcome to the forum.
As Mike says, you have to make sure your blade is firmly locked into place.
Also, is your carrier sheet sticky enough? this can cause it not to cut too well.
Which machine do you have? Is it a second hand 200-20 or one of the newer machines (sorry can't remember the numbers for those)?
-
Dedicated Scrapper
Hi there
I am also new to this but I cut 160gsm pearl paper with the blue cap and it cuts perfectly, and the speed is on 10. Hope this helps. I do struggle with the thicker card, i haven't yet got this sussed! but I will! lol
Vanessa
-
hey guys...thanks for all the responses!
first in answer to the questions; blade was always locked and carrier sheet seems fine.
My new blade arrived today...it has mad a world of difference! I am convinced there was an issue with the first blade, but that said i don't think the instructions that come with the machine to work out the cap and cutting pressure are particularly good. This time i followed advice i got from barry of graphtec technical support. He told me that in order to determine the optimum pressure you need to build it up slowly, test cutting in between then save the settings for your chosen media. This took some time but it is now working like a dream! I am so happy to have it working!
Thanks to everyone for their advice...was really helpful! watch this space for my first craft rob projects!!! How exciting !
xxx
-
Dedicated Scrapper
Glad you've solved the problem and are on your way Frankie
-
Robo Novice
Glad you are up and running.
Jayne
-
Dedicated Scrapper
- Limited Sponsor -
So pleased you're having success Frankie. Graphtec's customer support is amazing as you've now discovered.
-
Dedicated Scrapper
Tina craft robo
-
Dedicated Card Maker
- Limited Sponsor -
Welcome to the forum Frankie and pleased to hear that your problem has been resolved.
-
Hi, Iam getting a craft robo for christmas , so I am looking through the posts for hints and tips , I am glad to hear that technical advice is only a phone call away.
senge
-
Dedicated Scrapper
i had the same probs as you called the help line and they said i was using the wrong settings or maybe the blade was broken, told them it a new machine and new blade so shouldnt be, i was asked to have a look at the blade so i pulled it out, and out popped this tiny tiny little washer, told them that this washer had fallen out, they told me not to worry as they dont put them in anymore, put blade back in and hay presto cuts fine now i think the little washer was stopping the blade turning as it should, not sure if you want to have a look at yours, but be warned once the little washer comes off you will never be able to get it back on if you wanted to, i didnt as the blade can now more freely, might be worth asking some of the more experianced users there advice on doing this, but like i say mine all works fine now and i had been struggling with it for months i was goin to sell it, now i love it
-
Dedicated Scrapper
Originally Posted by senge
Hi, Iam getting a craft robo for christmas , so I am looking through the posts for hints and tips , I am glad to hear that technical advice is only a phone call away.
senge
Hi Welcome to UKScrappers, have you had a read of this thread yet?
Newbie Starter pack and cheat sheets here
Repeat after me "Google Is My Friend"
-
Dedicated Scrapper
Welcome to the forum Senge
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
Bookmarks