I cut them on white card to make sure they were ok. I've uploaded a screenshot of them in colour becauseif if I layered and uploaded the white ones I cut they wouldn't show up very well hope that makes sense
Here is a flower circle made for you. I spent a couple of hours, making sure that the nodes were minimal, and should cut well. I wanted to share a file here, as some of the .gsd's offered here are beautiful and I wanted to share to be helpful.
Hi I back in 2008 when I first joined UK Scrappers I was playing around on here but then in the September my dad died, do not why it has taken so long to have a go at designing again but I am back and having discovered the new Studio software - thanks to the May Challenge - I have made some very simple nesties - thought I would share
I've been playing with Hawaiian Quilts and made some nesting shapes. The photo is of the smallest of the layers which measures 2.267" and is cut from Bazzill card.
I used the same design element I used for the fancy border I uploaded yesterday, but applied it to a circle. Made in Inkscape, saved as DXF, opened in Studio and re-saved as Studio.
I did a test cut using 250 card of the smallest size which is about 2½" and it cut OK, but was so delicate I tore a couple of the curves because I wasn't really looking what I was doing
I would say use a lighter card and for the 2 smaller shapes break it apart and delete those very tiny triangles around the inside as they are too small to cut, but they will cut on the larger sizes.
Bookmarks