I hope it's OK to post this in here - I got a template for the lids of the tins from 2Peas but I had trouble getting it to print at the right size, so...
I had a play around with it and this template now fits my tins perfectly - I hope you can find it useful.
tinlid
Last edited by Lucille; 05-11-2011 at 03:59 PM.
Reason: change screen shot
Right I have never posted aby templates before and I hope this works
I like doing slide mailers for cards etc. so decided to have a go at making a template to cut out my own, it is in 4 pieces the front the back and the bit you put the slides in and then a hinge to connect the front and back together very simple
I have done one this morning in a few minutes it is by no means finished but I thinks gives a good idea of what the finished article looks like
Scrummy Scrappers SLO=9, DLO=, CJ=, mini book=,Total= 90
Hi is this what you mean I had made one of these recently for my little girl to decorate but i did on my score board, anyway ive not had time to cut it but if ive got my calculations right it should fold ok and tuck in slightly.
Let me know if its wrong I wont be able todo anything till tomorrow though, but you can tinker with it yourself if its not right.
ps ive just moved the centre fold line up slightly still not had time to cut it yet, if anyone does use it can you let me know just abit busy today(sat 9.20am)
Last edited by Lucille; 05-11-2011 at 04:15 PM.
Reason: change screen shot
I used wlisa mailer template last week that she robo-ised from the craft tv weekly pdf and i asked her if i could post my amended version, once my pc was back in action.
well her it is its still in 2 parts but ive made the flap slightly smaller on cd mailer -1, so that i could gain some extra width to build in a spine which makes it all fold together better when you have the bulky inserts in it.
and ive also adjusted cd mailer - 2, slighlty
just put some glue down flap A, and stick it Inside cd mailer -2 before you stick the side flaps.
dont stick it over the dashed line as that needs to fold.
ive nearly finished my mailer i am planning to use it to put our Disney photos in.
i will try and post my mailer later, but for now heres the gsd's
Ok here is the front and first inside page i will put some others in my gallery.
i need to cut some more envelopes for my last page but can not make up my mind on what colour.
have also left my ribbon long as dont know how much stuff from our holiday i will be putting in it, so room for expansion there.
ive cut all the envelopes, die cut flowers and the dotty mesh thats on the front and inside all on the robo.
ok ive added some photos now, ive used mine slightly differnet to the tv demo. Ive put photos on my flip pages and instead of envelopes on the last page i printed hannah some disney princess pictures.
my info is inside the shaped head tucked behind the title
I don't know if this is any good at all... I had a little play never put anything on here cos I'm still learning. It does fit into a tin... I am falling over them because DH is addicted to Altoids, lol! The larger template is for the cover.. have set it for two cuts.. the smaller is for inner pages (different colours?) Holes for ribbon or brads. Perforations to assist opening. Someone might be able to make use of it anyway. There isn't much to make a screenshot of.. I cut it in some old card so my trial is very tatty.
Andi
Following on the little two page album sheets I put in the other thread about altoid tins, I played a bit more and came up with this one... it sounds a bit ragged on the corners but it cuts fine. This is only my second "make" that I've had the nerve to put on here. It comes nowhere near the great stuff that all you other guys and gals post, but hey! even Picasso wiped his btm on some of his early stuff I guess. The single sheet is a bit smaller, so would make a nice mat if cut in a diff colour to the four page bit and would sit over ribbon if you wanted to tie the album with some. Please someone, tell me if it's any use at all and if I am getting there, cos if I'm not I'll give up now...
Hi just thought i'd share this wallet i made for my DIL. She is going to America for her brothers wedding and its her birthday while shes away.
Just a bit of a diffrent way to put money in a card..
its so simple to do you could just fold it, but robo does give a nicer crisp edge to the folds. All you do is fold like a fan along the folds glue the side edges together then carefully glue the outside edges together and decorate.
I used peel off surplus to add the stitching... took forever ! and then just added that little dog.. you can find the template for that herehttp://www.ukscrappers.co.uk/boards/...d.php?t=162554
I had seen someone putting bits of ribbon on a cardboard spool for organizing it and I decided to draw one for the CraftRobo. I hope you can use this. You will need to cut it out of heavy cardstock....I had to cut twice!
Here is a template to make labelling your Costco paper folder easier. Number the pictures of your papers on the packaging, then rearrange the papers into the corresponding pockets. Thanks to Bridget for this simple organising system.
I needed a sentiment to finish off a card today, so drew some paper pieced ribbon/banners and thought I’d add them to this month’s challenge in case they would be useful to anyone else.
The sentiments should be written with Robo’s pen tool before sending the banners to cut.
The card in the photo is only to illustrate their size, it was made from a variation on Shirley’s Easel Card Template here, and the flower was made using Rosemary's Folded Dahlia Template here. Thank you both very much for sharing these wonderful files with us.
This Stationery Box GSD Template can be made to suit any occasion. I have given it a Christmassy feel with the card and the decoration I used but it could easily be made for a Birthday or even as Wedding gift.
It could be made for a woman or a man. We all know how difficult it can be to make a card or gift for the men in our lives, brother, husband, father, grandfather or uncle and this would be a perfect gift to give for that person who has everything.
There are the base, calednar blank template and borders (text is in english) in zip
You'll have to add your calendar to template (mine is in russion so you would not need it) The blank jpg template is included
This keepsake is based on a desk tidy and I have turned it into a keepsake gift that could be used for many occassions although I have used it for a new baby in my example.
You get the following templates include - desk tidy gift box, mini album and 4x4 card and envelope. all for you to decorate and it small enough to be able to used all those scrap papers that we ALL put by for later use but sometimes never get around to using.. but here is the ideal project.
The ones I did were given with the intention of being used as brag books for the proud grandparents and we put some of pictures of the the newborn in to start the album off.
as always for taking the time to look --- you can find it HERE
Bookmarks