Donate with PayPal to help keep UKS online!



Go Back   UKScrappers > Forum > Special Forums > Cutting Machines - chat, help. templates > Cutting Machine Chat

Notices


Results 1 to 5 of 5
  1. #1
    Dedicated Scrapper
    Join Date
    Sep 2023
    Location
    Morton, Bourne, Lincolnshire
    Posts
    2
    View Gallery

    Trader Rating: (0)

    Caft Robo CC100 10

    Hello. Just to introduce myself, my name is Joyce and I am located near Bourne in Lincolnshire. I bought my CR many years ago and loved using it. I stopped using it during our house build and the fact that cutters seemed to be difficult to find. I recently tried to get my CR working, but have lost the driver disc. I bought a 2nd user cc200 20, but cannot get that working either. I have tried to download drivers from the Graphtec site, but nothing seems to work. Does anyone have a working machine with software that they wish to sell, or is there anyone that could help with getting one of my machines working. I am not looking for a "lite" machine as I love the print and cut facility. Any assistance would be greatly appreciated. Thank you. Joyce.

  2. #2
    Dedicated Scrapper Neries's Avatar
    Join Date
    Nov 2009
    Location
    Wales
    Posts
    1,785
    View Gallery

    Trader Rating: (2)
    Quote Originally Posted by JDL View Post
    Hello. Just to introduce myself, my name is Joyce and I am located near Bourne in Lincolnshire. I bought my CR many years ago and loved using it. I stopped using it during our house build and the fact that cutters seemed to be difficult to find. I recently tried to get my CR working, but have lost the driver disc. I bought a 2nd user cc200 20, but cannot get that working either. I have tried to download drivers from the Graphtec site, but nothing seems to work. Does anyone have a working machine with software that they wish to sell, or is there anyone that could help with getting one of my machines working. I am not looking for a "lite" machine as I love the print and cut facility. Any assistance would be greatly appreciated. Thank you. Joyce.
    Hi Joyce and welcome. Try downloading and installing the Studio Software at https://www.silhouetteamerica.com/software

    Go to the set up https://www.silhouetteamerica.com/setup and follow the instructions for a Portrait machine.

    I used it with my old Craft Robo 300 30. It shows up as a printer in your devises. The Silhouette Portrait is the successor to the Robo.

  3. #3
    Dedicated Scrapper DJG's Avatar
    Join Date
    Sep 2007
    Location
    EAST SUSSEX
    Posts
    14,878
    View Gallery

    Trader Rating: (25)
    I would also recommend what Neries suggests

  4. #4
    CARD MAKER AND CR OWNER
    Join Date
    Apr 2007
    Location
    Essex
    Posts
    2,188
    View Gallery

    Trader Rating: (0)
    Hi there - I need some help / advice please. I am going to have to change my operating system - I currently run on XP Professional - which I love. I suits my purposes exactly. But because of its age I am now getting a few problems and it is time for a change. I am guessing I will have to go onto Windows 11.

    I have a very old (but perfectly functioning) Craft Robo, the one with the grey lid. Will I still be able to run this on Windows 11 do you think? AND - what about all the hundreds of designs that I have created over the years and are stored in the library. Will they transfer easily (or even automatically) if I download the Silhouette software?

    If all else fails I could get a system that runs both OS (have done this in the past, many,many moons ago and pre my Craft Robo) but then of course I am likely to loose the print and cut function because new printers are rarely compatible with XP.

    I hope my attempt to explain is clear enough. Any advice you can offer would be greatly appreciated. TIA.

  5. #5
    CARD MAKER AND CR OWNER
    Join Date
    Apr 2007
    Location
    Essex
    Posts
    2,188
    View Gallery

    Trader Rating: (0)
    Just to let you know that I have just spoken to a VERY helpful chap at Graphtec. Looks like I would still be able to use my Robo! Might be a bit of faffing around but possible. He even told me to call them again if I get stuck. After all these years I am amazed at this wonderful customer service.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Click HERE for additional Sponsors


All times are GMT +1. The time now is 07:06 AM.