Oval Nesting Shapes

**DJG** · 28-05-2008, 12:44 PM

Ovals similar to nestabilities

**SylviaF** · 27-01-2009, 01:09 PM

Been looking through some of my files - I made this last year and thought it might make a nice topper for Easter, or even a sympathy card etc. I have converted it using the PDF>DXF>GSD method, but I have not cut the GSD so I hope it will be OK. I have put it through Brian's converter.

I was pleased with it once it was layered up and bedecked with ribbon and beads.

Sylvia x

**SylviaF** · 12-02-2009, 05:02 PM

Done in DM and converted to GSD by PDF method. When layered up and decorated with beads, ribbon and mulberry flowers it makes a pretty topper. I have used the pink and the silver concept card (160 gsm) for this topper.
I haven't tried to cut the GSD file so I hope it is OK, I have put it through Brian's converter.

Sylvia x

**SylviaF** · 27-03-2009, 03:25 PM

Simply done in designmaster and converted to GSD via the PDF>DXF>GSD method. I have not cut the GSD file so I hope it will be OK. Makes a nice topper decorated with flowers - hope it will be of use

Sylvia x

**Tosca** · 05-09-2009, 12:51 AM

Here's a couple of single shape nesties. Easy to resize - just centre the blue into the black, group and resize as one.

**Lucille** · 17-10-2009, 01:09 PM

I've put this file together as a set it contains - 1 A6 card blank, 2 sets of nesting shapes oval and rectangular, the card can be used whole with the nesting shapes

A6 fancy edge card set 3.jpg

OR you can place one of the nesting shapes centred on the right side of the card and cut that as an aperture.

Apperture oval.jpg

**Lucille** · 17-10-2009, 08:05 PM

Don't forget the larger of the nesting shapes can be used to cut an aperture in the card.

**Lucille** · 19-10-2009, 06:11 PM

I was going to upload this nearer the weekend, so I don't drive you all mental, but what the heck.

Newbies you can use one of the larger nesting shapes to cut an aperture in a card by centering one of the larger nesting shapes on the right hand side of the card and then sending it to cut, no welding require.

To convert this file to a GSD, open the file in Inkscape and save as DXF to load and cut in RoboMaster, simple

**Lucille** · 24-10-2009, 02:10 PM

The set contains an A6 card blank and 2 sets of nesting shapes. Don't forget you can position 1 of the nesting shapes centred on the front of the card to cut an aperture.

To convert this file to a GSD, open the file in Inkscape and save as DXF to load and cut in RoboMaster, simple

**Lucille** · 25-10-2009, 08:21 PM

Here is another set.

Don't forget you can use one of the larger toppers to cut an aperture in the front of the card, by centring it on the right hand side and sending to cut.

To convert this file to a GSD, open the file in Inkscape and save as DXF to load and cut in RoboMaster, simple

**Lucille** · 27-10-2009, 04:10 PM

I should be doing other things, but what the heck I can't be bothered

so here are 2 cards sets each one has - 1 A6 card and 2 sets of matching nesting shapes, oval and rectangular.

They were made using the same edge shape and I flipped it to make the other set.

Any of the nesting shapes can be used to cut an aperture, by centring it on the front of the card and sending to cut.

To convert this file to a GSD, open the file in Inkscape and save as DXF to load and cut in RoboMaster, simple

**Lucille** · 27-10-2009, 05:00 PM

Here is set 7

**Lucille** · 29-10-2009, 12:09 AM

I'm sure some of you are sick of these, but for those that aren't, here are 2 more both have the fancy edge A6 card blank and 2 sets of toppers oval and rectangular.

To convert this file to a GSD, open the file in Inkscape and save as DXF to load and cut in RoboMaster, simple

**Lucille** · 29-10-2009, 12:10 AM

Set #9

To convert this file to a GSD, open the file in Inkscape and save as DXF to load and cut in RoboMaster, simple

**Lucille** · 29-10-2009, 09:15 PM

I've been working on this most of the afternoon. Got the idea but hell and all trouble getting the basic shape to weld so I could work with it, then realised I was having a DOH!! hour, but it's finished.

To convert this file to a GSD, open the file in Inkscape and save as DXF to load and cut in RoboMaster, simple