Circular Nesting Shapes

**nin2three** · 22-02-2010, 05:55 PM

just done these hope there usefull

**DJG** · 01-06-2010, 11:40 AM

I cut them on white card to make sure they were ok. I've uploaded a screenshot of them in colour becauseif if I layered and uploaded the white ones I cut they wouldn't show up very well hope that makes sense

**DJG** · 05-11-2010, 05:09 PM

I haven't cut these but the should be fine

**pigtailpat** · 30-12-2010, 01:28 PM

Here is a flower circle made for you. I spent a couple of hours, making sure that the nodes were minimal, and should cut well. I wanted to share a file here, as some of the .gsd's offered here are beautiful and I wanted to share to be helpful.

Enjoy.

Pat

**DJG** · 05-04-2011, 01:16 PM

I haven't cut these but I can't see that they're would be any problems.

**DJG** · 12-04-2011, 10:44 AM

These cut fine if anyone can use them.
ETS
I've added a backing paper

**Stiggy11** · 02-05-2011, 03:43 PM

Hi I back in 2008 when I first joined UK Scrappers I was playing around on here but then in the September my dad died, do not why it has taken so long to have a go at designing again but I am back and having discovered the new Studio software - thanks to the May Challenge - I have made some very simple nesties - thought I would share

**Lucille** · 19-05-2011, 09:14 PM

I've been playing with Hawaiian Quilts and made some nesting shapes. The photo is of the smallest of the layers which measures 2.267" and is cut from Bazzill card.

**Lucille** · 13-07-2011, 03:16 PM

HA! make this with a border punch then

I used the same design element I used for the fancy border I uploaded yesterday, but applied it to a circle. Made in Inkscape, saved as DXF, opened in Studio and re-saved as Studio.

I did a test cut using 250 card of the smallest size which is about 2½" and it cut OK, but was so delicate I tore a couple of the curves because I wasn't really looking what I was doing

I would say use a lighter card and for the 2 smaller shapes break it apart and delete those very tiny triangles around the inside as they are too small to cut, but they will cut on the larger sizes.