You Can Be Sure of UKScrappers.
 
 
 


September 2019 House Challenge

by alison 2

Chain-link 1 Tickled Pink

by MiniOwner

Sept House Challenge Bubble Fun

by MiniOwner

ABC I is for indigo

by MiniOwner

Sept week 3

by elainevking

Donate with PayPal to help keep UKS online!



Go Back   UKScrappers > Forum > Special Forums > Silhouette/Craft Robo Forum > Studio/GSD/SVG Templates > Christmas

Notices

ATDML banner

Page 1 of 4 123 ... LastLast
Results 1 to 15 of 56

Thread: 3d

  1. #1
    Owner of Janome MC9900 & Brother ScanNCut
    Join Date
    May 2005
    Location
    Derbyshire
    Posts
    9,908
    View Gallery

    Trader Rating: (1)
    Thanked 0 Times in 0 Posts

    3d

    ok here is the amended version.

    ive cut it as you can see, would look nice with 2 back to back and hung from the tree maybe.

    this is not a trace ive drawn this using shapes in inkscape and exported as a bitmap.

    it cuts a treat.
    Attached Images Attached Images
    Attached Files Attached Files

  2. #2
    Dedicated Crafter lucylogic's Avatar
    Join Date
    Jan 2006
    Location
    Eston Middlesbrough
    Posts
    768
    View Gallery

    Trader Rating: (1)
    Thanked 0 Times in 0 Posts

    Slot Together Xmas Tree

    As Xmas is approaching fast I've put together this file, it's a slot together Xmas Tree for those last minute cards, boxes etc.

    This is my version (not quite finished yet) which will go into JennieBean's Cot Box (thank you J along with some fake snow (White Flower Soft) and some glitter dust.

    Hope some of you find it useful.
    Attached Images Attached Images
    Attached Files Attached Files

  3. #3
    I'm sure i could use that for something..... frogzone's Avatar
    Join Date
    Oct 2006
    Location
    manchester, uk
    Posts
    589
    View Gallery

    Trader Rating: (5)
    Thanked 0 Times in 0 Posts

    sno flake xmas tree 3d

    Originally Posted by MaryAnne
    A mate of mine on linked to this snow scene. I am AMAZED it could be done with a Cricut. Thought you all might enjoy seeing it - and will hope for a CR version sometime soon LOL!

    http://www.cricut.com/messageboard/t...ookieSupport=1


    just finished the first tree ,not quite the same as in this piccy but lovely, camera not charged up so will add piccy soon.
    i cut six snow flakes all in slightly smaller sizes, making sure each one had a small hole in the misddle.
    i just used 100gsm copy paper for the one i have just done.
    then i used stickles icilcle glitter glue on them, left them to dry.
    once dry I curved over the edges of the flakes them carfully threaded them onto a coctail stick largest first., dsbbing a small dot of glue around the stick tohold it in place then put the next size down etc etc.
    i have only put 4 flakes on the file so its would not be too big!
    not sure where this flake came from as i just have it listed as sno flake, so if you recognise it as your work can you let me know and i will add it to the file , and thanks because it really is just the right sno flake for this !

    Additional search word snowflake
    Attached Images Attached Images
    Attached Files Attached Files
    Last edited by Lucille; 08-12-2007 at 09:11 PM.
    Lis


  4. #4
    Dedicated Scrapper sugar n spice's Avatar
    Join Date
    Dec 2005
    Location
    cheshire
    Posts
    1,574
    View Gallery

    Trader Rating: (5)
    Thanked 4 Times in 4 Posts

    3D snowball

    Sorry I have not been able to upload anything of late had a serious problem with the computer, and then had to put CR away for Christmas etc

    Anyone for a snowball fight?

    Just finished this one cuts and fits together well.
    I have made each different size a different colour.
    It is a bit complicated to explain but here goes-

    First take the larges circles and slot them together to form a sort of 3D cross.
    Then take the second largest circles and slot these into the next set of cuts, and so on, right down to the smallest circles, warning it starts to get complicated the more circles you slot together.
    You should end up with a complete 3D ball shape, which will fold flat if you want to put it into a card etc.
    enjoy

    I will try to get a photo later when DH gets home.
    Attached Images Attached Images
    Attached Files Attached Files
    Last edited by sugar n spice; 03-01-2008 at 02:54 AM.

  5. #5
    Dedicated Scrapper silverst170's Avatar
    Join Date
    May 2006
    Location
    a crafty place
    Posts
    13,890
    View Gallery

    Trader Rating: (10)
    Thanked 7 Times in 7 Posts

    Christmas 3D Fireplace

    I know I know it's Christmas again, I can't help it whats come into my head can I

    you can find it here

    Thank You for looking
    Attached Images Attached Images
    • File Type: jpg 1.jpg (94.1 KB, 860 views)
    • File Type: jpg 6.jpg (68.2 KB, 555 views)
    Last edited by silverst170; 26-06-2008 at 11:21 PM.
    Tina craft robo

  6. #6
    Dedicated Scrapper silverst170's Avatar
    Join Date
    May 2006
    Location
    a crafty place
    Posts
    13,890
    View Gallery

    Trader Rating: (10)
    Thanked 7 Times in 7 Posts

    3d Christmas Cottage

    Another Christmas Offering.............
    3D Christmas Cottage.

    Sorry it's early

    You can find it here


    THANK YOU for looking
    Attached Images Attached Images
    Tina craft robo

  7. #7
    Cardmaker
    Join Date
    Apr 2008
    Location
    Surrey
    Posts
    468
    View Gallery

    Trader Rating: (0)
    Thanked 0 Times in 0 Posts

    Christmas Decoration

    This little "box" stemmed from the September Challenge. I wanted to try something a little more difficult than my cube that I posted for that. So here it is, a 10 sided prism. I have decorated it with a little glitter glue. It doesn't show very well in the photo but looks pretty under artificial light. I have made this in white 160 gsm card but it would look good in silver or gold, or whatever your Christmas tree colour scheme is going to be. There is a silver version with a bow in the September Challenge thread.

    Suggestion for make-up: I used a bead (placed inside the form) threaded on a silver cord for the loop. It is a good idea to put this in first and needs to be placed in the side with the single tab fastening, then stick this single tab (this will become the top). Stick the rest of the tabs leaving the triangle without tabs until last. This will enable you to pop in a chocolate or little present right at the end. Place a "blob" of glue at the apex of the prism to secure the cord (or stick the bead at the top at the beginning of the 'exercise') Unless you have fast drying glue this can be a challenge so not for the impatient.



    Mary
    Attached Images Attached Images
    Attached Files Attached Files
    Last edited by Wishful Thinking; 08-09-2008 at 08:13 PM. Reason: Addition of GSD file

  8. #8
    Dedicated Scrapper silverst170's Avatar
    Join Date
    May 2006
    Location
    a crafty place
    Posts
    13,890
    View Gallery

    Trader Rating: (10)
    Thanked 7 Times in 7 Posts

    3D Christmas Tree with Angel Topper

    Well this took approx 6 months to perfect But now its perfect in everyway.

    stands about 6 inches tall I have cut from perfumed card and decorated with small beads to th leaves it also has a angel topper to the top

    you can see it here


    Thank You For Looking
    Attached Images Attached Images
    Tina craft robo

  9. #9
    Dedicated Scrapper silverst170's Avatar
    Join Date
    May 2006
    Location
    a crafty place
    Posts
    13,890
    View Gallery

    Trader Rating: (10)
    Thanked 7 Times in 7 Posts

    3D Christmas Wreath

    Another for the comming season and it's slowly creeping on us

    hope you like


    you can find it here



    Thank you for looking
    Attached Images Attached Images
    Tina craft robo

  10. #10
    Dedicated Scrapper sugar n spice's Avatar
    Join Date
    Dec 2005
    Location
    cheshire
    Posts
    1,574
    View Gallery

    Trader Rating: (5)
    Thanked 4 Times in 4 Posts

    cuboctohedron

    from the thread started by mary in the chat section
    sorry its done in 4.4 version
    Attached Images Attached Images
    Attached Files Attached Files

  11. #11
    Hooked on Pop-up Cards ErikaP's Avatar
    Join Date
    Jul 2006
    Location
    Callian France
    Posts
    1,438
    View Gallery

    Trader Rating: (2)
    Thanked 0 Times in 0 Posts

    Double faced 3D star

    Just finished this one. The photo doesn't do it justice, looks much better in real life. I can see it being attacked with some glamour dust or being cut from some irridescent or sparkly card.

    I've put some instructions on the template, but if they don't make sense, just shout.

    Erikap
    Attached Images Attached Images
    Attached Files Attached Files

  12. #12
    Dedicated Scrapper ltgrandma's Avatar
    Join Date
    Feb 2008
    Location
    Avon Lake,Ohio U.S.A.
    Posts
    698
    View Gallery

    Trader Rating: (0)
    Thanked 0 Times in 0 Posts

    mom ornament

    I reconverted the gsd for this file. It comes out beautiful in Carolluk's
    conversion tutorial.
    I also redid the picture - I wasn't pleased with the first one - this one looks
    a little more festive.
    Attached Images Attached Images
    Attached Files Attached Files
    Last edited by Lucille; 14-11-2008 at 03:48 PM. Reason: add

  13. #13
    Dedicated Scrapper ltgrandma's Avatar
    Join Date
    Feb 2008
    Location
    Avon Lake,Ohio U.S.A.
    Posts
    698
    View Gallery

    Trader Rating: (0)
    Thanked 0 Times in 0 Posts

    Rudolph Tea Light

    This does take two pieces of cardstock.
    I found a light that rotates to three different colors. I know the kid's
    at the Christmas shoppe will love this.

    Since I don't have a mathmatical mind, I worked on the bottom until
    my head hurt (many hours).
    I wanted it to fold under so the pieces met at an angle into a perfect
    octagon.

    Anyone is free to play with it and change it!
    Otherwise, I was able to fold it together with what I have done.

    I used vellum inside the windows.

    Linda

    T'light inner by Celia Reed
    Attached Images Attached Images
    Attached Files Attached Files
    Last edited by Lucille; 30-11-2008 at 08:43 PM.

  14. #14
    Dedicated Scrapper DJG's Avatar
    Join Date
    Sep 2007
    Location
    EAST SUSSEX
    Posts
    16,394
    View Gallery

    Trader Rating: (25)
    Thanked 66 Times in 65 Posts

    Freestanding christmas tree

    I cut mine from gold and silver mirriboard... need to cut 4... and used them alternately(spelling). I know some mirriboard is a pain to cut but this was white on the inside so was probably thinner.
    I've uploaded a screenshot as my camera needs new batteries
    Attached Images Attached Images
    Attached Files Attached Files
    Last edited by DJG; 31-07-2009 at 10:48 AM.

  15. #15
    Dedicated Scrapper sugar n spice's Avatar
    Join Date
    Dec 2005
    Location
    cheshire
    Posts
    1,574
    View Gallery

    Trader Rating: (5)
    Thanked 4 Times in 4 Posts

    3D tree decs 4.4v

    Saw something similar made in metal so designed my own for the CR

    You could add small gifts and hang on the tree OR if you made enough pop in a small choc, add a tag to the top of each and use as an advent the kids will love the hunt round the tree to find each one.

    Sorry Lucille they are not big enough for your Ferrero Rocher.
    Attached Images Attached Images
    Attached Files Attached Files

+ Post New Thread
Page 1 of 4 123 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Foil Play Crafts 4 Eternity Memories & Photos Graphtec UK Papermaze
Country View Crafts
Graphtec UK banner

Click HERE for additional Sponsors


All times are GMT +1. The time now is 05:11 AM.

Search
The Library (& FOTW)
Blog Bits Archive
Facebook Page

Challenge & Class Links

Weekly: Team Challenge
House Challenge
Card Challenge
SNAP Photo Challenge
Simple Recipes
Project Life (& Printables)
Scrap Like You Mean It Reboot

Graphtec Sky

Latest Group Posts
Declutter Your Home
2019 is the Year to Declutter
by ruth
05-09-2019 10:21 AM Go to last post
The Green Buttons' House
GB Weekly Challenge March 25th 2019
by Maggie B
25-03-2019 07:09 AM Go to last post
The ADVENTurers 2017
Christmas day
by kimmie_35
07-01-2018 10:37 PM Go to last post
The ADVENTurers 2016
On Christmas Day ...
by lebosi
29-12-2016 03:55 PM Go to last post
Ali Edward's December Daily
December Daily 2016
by beanpole
04-12-2016 10:30 AM Go to last post
The ADVENTurers 2015
On Cristmas Day, Santa gave me ....
by Natoni
28-12-2015 07:16 PM Go to last post
View All Groups



Charmed Cards & Crafts sky