Easter Cards and Toppers

**ErikaP** · 07-03-2007, 12:25 PM

Here's the 2nd template, fun for Easter. This is sized for an A6 card

Enjoy

ErikaP

**leakycauldron** · 30-03-2007, 04:51 PM

Two layers..the inside being the bigger one. Cut the larger flowers on the outside layer, and the smaller on the inside layer. I you use different colours for the layers, including the inside...I printed a double sided desigh from Pink Petticoat....and of course use a pen for the wors. I did try using the pen for the big flowers before cutting them...just leaves a slight colour on the petal edge after cutting. Will try and upload a photo when son returns from a Uni field trip, over the weekend....he has the camera!

**Sue Nic** · 04-04-2007, 10:06 AM

[COLOR="DarkRed"][SIZE="2"]Here's one of my projects that appeared in Making Cards.

It is a basic shape so that those without a CR can cut it by hand however it is very effective.

Suitable for many occassions and the photo shows Easter decoration.

Hope the template comes in handy.

Sue

**christine mckie** · 27-01-2008, 01:31 PM

cross drawn by me and then edited in DM, cross can be resized, could also be used for Easter Card

**hellma** · 27-01-2008, 08:36 PM

Hi was just playing around with Inkscape and came up with this hope someone can use it have done Insert.

Helen

**Shirley Anne** · 11-03-2008, 09:53 AM

My hubby thinks the Bunny looks as if he's had a nasty shock !!

Shirley

**DJG** · 17-02-2009, 09:14 AM

Font is RMEgg from dafont website

**Tigtombiz** · 01-03-2009, 03:52 AM

Enjoy

Adher the purple panel using foam pads.
Stick the egg cut out onto a 5p piece or a 1p then stick a round foam pad centrally onto the coin and then stick another coin to the other side of the foam pad, making a sandwich from the two coins and the one foam pad. Make sure the coins and pads are centrally placed. Place this 'sandwich' into the purple runner, so one coin is on the back behind the runner and the other coin is on the other side of the runner. This will enable the egg to spin as you tilt the card from side to side.

You will need to message me with your email address,if you would like a copy of the gsd file 'Easter Spinner Print and Cut'
as being a hi res (200dpi) sheet, it is too large to upload here.

**sugerplum** · 03-03-2009, 12:48 PM

This was something i did for the febuary newbie challenge it cuts ok when blade is sharp i need to get a new one.The font i used was balloonist and the rabbit was from wm-easter1 font. free font can't remember where!!

I couldnt decided which colour card to use to cut it so i tried a new technique to me sponge and ink pap. Not sure if i like it it"s a bit blotchy

**hazel7797** · 06-04-2009, 02:49 PM

Here's one I did late last night . . . may be a little late for this Easter! Probably best cut quite big as it's very fine in places! The ding was Beautiful Ornaments

Hazel xx

**bizzy bee** · 14-04-2009, 02:43 PM

my April challenge, made with dingbat WM easter, dings by Willy Mac.at last you have both file and picture ( I hope)

**SylviaF** · 20-03-2010, 10:57 PM

Just a very simple Easter card - a cross set in a latticed oval. I cut the cross in silver mirri but it has come out black on the photo. The text was done with a black pen and then filled with a silver glitter pen. The font is Fontleroy Brown. Hope it may be of use to some.

**silverst170** · 25-03-2010, 09:52 PM

I am probably too late with this one.. MOST OF you may already have done your Easter cards But I'll upload anyway..

I have also available in SVG on my blog if you wish that one

**Myra** · 15-02-2011, 07:11 PM

A bit early I know.

Myra

**Shirley Anne** · 12-04-2011, 06:33 PM

Another 3d shelf type card this time with an Easter theme. There are 3 layers as like the boat card they just slide through the slots in the shelf so it's really easy to put together. Available in gsd and svg formats with assembly instructions included. You can find it here.