Getting a bit brave now and thought someone may be able to use this shape.Got how to upload piccy sussed but stuck on how to put the file on here-any help please?
Printable View
Getting a bit brave now and thought someone may be able to use this shape.Got how to upload piccy sussed but stuck on how to put the file on here-any help please?
this time a square and a arched window.
I altered the square into a rectangle and as you can see from piccy , it worked out ok - I think the arched window would look nice on a christening card with a font (is that the right spelling?) in front, change the outside to a dashed line and you have a line to place your peel-off on .
I found that using one of those cardboard credit cards that you get as junk mail works a treat getting the little squares left off the carrier sheet.
enjoy
just noticed that in the picture the lines look a bit crooked - they not, just my bad picture!
spent weeks and sweat and tears trying susibi's lattice tut and finally managed it.
here is my first lattice, all i need now is how to make different shapes. hope its of use to someone.
sugar.
sorry for the delay have managed to resize one image you may need the font butterfly heaven sorry for the confusion will try with the other file later
sugar
The last one for tonight .....
I have just got two more request to do which i will try and do tomorow.
Lis
Hi,
Should be in bed, but what the hell.
Just preparing a LO for my daughter's scrapbook. I gave her a partially completed scrapbook for Xmas. The front was pictures of her, and her little brother from birth to about 3 years old. At the back I put pictures of other family members.
She wanted photos of her brother, so she can see if her birth son looks like him. He was killed aged 9, and she has named her son after him.
My aim now is to add a few pages to the album every time I see her. This one, when finished, will be of my mother in law, her grandmother, who passed away in February.
The frame may not be to everyones taste, but I think it works well for 'heritage' photos.
Maybe someone can use it.
ErikaP Ornamental frame
Designed in Inkscape, combination of an altered dingbat, P22 Floriat Font, and freehand. Traced in Robo. Cut at slow speed, 3, from 160gsm card. Too ornate for double cut.
Hi Ladies earlier this year I visted York Minster and took hundreds of picture of the architechtural (sp?) art.. from heating grates to the carving on the pews.
Now finally i have got round to digging out the photo and doing somthing with them.
The files were drawn by hand in paint and and then auto traced in robo master, it took a few attempts as lots of tidying up needed to be done.
I cut it from pearlised Paper approx 135 gsm and used speed 3 and pressure 17.. that is with the robo 100-20 (the blue one). It takes about 7 mins to cut although i forgot to time it until i was halfway through!
It took about 30 mins to weed out the tiny bits, so not for the faint hearted, but if you have some time to kill or need to take your mind off things, then go for it !If you are cutting out of fine paper make the outline deeper that way you have more to get hold of when you are weeding and you can trim it back when you have finished.
After i had finished, realised that i could have used pre-set shapes from word and copied them into paint, which would have saved loads of time because trying to get a completly symetrical heart is not easy!!
Now i've cut it I have no idea what i'm going to use it for ..
Using the Craft robo tutorial and PSP I've created my first lattice. I've done it in five different sizes, handy for card fronts, so hope they'll be of use to someone.
Can anyone tell me how to get the numbers in the middle of a lattice please, I'd be most grateful. Thanks. Hugs iris xx
Still playing around with lattice in Design Master and came up with this. Just weld whatever you want in the centre space. The screenshot shows my sons name but the template is minus the initials ready for your own needs.
Lynne
converted to GSD by Lucille
Been playing with combining cutouts and come up with the rose sitting in a hexagon mesh.
I stuck the liner to the card front with doublesided sticky sheet. I then coloured the rose and leaves with Perfect Pearls powder, (I was a little bit careless as I applied it, tut tut!), Alternatively you could use mica powders here , I then used glitter on the honeycomb.
Ruthan x
As the title says,hope someone can use it
Thought I would share the mat I made to go with Weemary's waterlily decoupage. I designed and cut the mat with DM but have done a GSD conversion. Some of the lines look a bit wonky on conversion. It fits the front of an A5 card and the blank in the middle is just a little larger than the first waterlily layer.
Lynne
Forgot to say thank you for the waterlily Weemary
Three more mats for the challenge. I have converted them to GSD, but they may need a little tweaking! The GRA files are much better. I've cut them on 120gsm paper and they cut well.
Hi,
Hope you can use this template. I just pinched the leaves by hand because I am not always fond of the folds done with the dashed lines
Heres a very basic Octagon Lattice which was one of the first ones I did at the start of the weekend.
I have made the lattice a different colour to the card so if your carrier isn't really sticky you can cut this first to avoid slipping.
Also added a lattice matt for if you want to use a plain base card.
Hope someone can use
Jo
I don't know if anyone can find a use for this! Created in DM and converted to GSD format. I have cut the GSD file to make sure it is OK - it's not as good as I'd like but it's the best I can do! Care is needed in lifting off the carrier sheet as it's a bit fragile.
Sylvia x
Another I was working on for uploading, designed from a custom made die I designed, You may sell your cards made from the template but not the file please. I did it in Black and White because I think it looks effective.
Hope its ok
Tina xx
Sorry I forgot to say you will have to change cutline settings to cut pink rose
Now I have worked out how to do this I am having a great time messing about making these.
Hopefully this will come in handy for someone.
Hi everyone,just thought I would let you see what I have been doing,I have made some Lattice shapes templates using Sandy's tut in DM and thought I would give other people the chance to use them. They can be resized if you wish to do so, Stella x
converted to GSD by Wishful Thinking
Hi Dippy Anne here
Here is the template i should have uploaded, hope someone can find use for it,it is my first attempt at templates.
GSD file added by Fuschia
I have finally found the courage to post a template. I have been playing around in inkscape. These are just drawn with the calligraphy tool and duplicated and moved around in the rows and column feature. I added a couple of mats in case they would be useful.
A couple more. Hope they can be of use to someone.
Frame 4 is a bit thick. It was the first one I made but it cuts well and looks quite pretty when matted.
Been playing with lace ideas, and one of the designs I came up with is this lace island card. I am a stamper, and this card can be stamped on and looks neath on the inside.
Hope you like it.
Hope this will be of some use to you.
You will have to reset cutline settings for different colours and the Pink colour is the pen tool.
Personal use only please, However you may sell your made cards.
Font is Freebooter and is free
Another offering for you
this is plain lattice with a passion flower as a topper, I cut the flower from glitter card
I am a new member who has owned a CraftRobo since August and I'm loving it, especially since I have been trying out the tutorials. The lattice tutorial was super and I managed to create a diamond lattice and then placed the "Challenge" font in the centre to create a garden fence. It's my first creation so thought I would share it.:rolleyes:
This topper could be used for a sympathy card or even a christening card. Done in DM and converted to a GSD with the pdf>dxf>gsd method and I hope that it will be OK.
Sylvia x
Sorry that some of you can't open the file. I have put it through Brian's converter and hope that you can now open it.
Two the same design one as a topper and one as a card
One for a topper one for the centre of a a card. I love the monochrome look
Another layered lacy topper, done from following Joyce's, AKA 2magpies great tutorial! Thank you Joyce! I'm having so much fun with these!
Hazel xx
I folllowed the tutorial ,from 2 magpies lacy aperture card, ithought it may come in handy for someone.
Anne
This is another template made form Joyce (2magpies) I am on a role now.
Thank you Joyce for making templates easy to follow, i am really enjoying doing different ones.
Anne
Many thanks to Lucille for checking this file and making the mats for me.
I hope this template will be of use to someone, you can either use it as a topper or a stencil, i have tried it and it cuts well.
Anne
These were made with a dingbat called Kaleidoscope bats. They only needed a little tweaking
Not very original I'm afraid but I'm still fairly new at this.
Well I must be going round in circles :)
As I find myself making up GSD files with circles ,ovals etc
So here is one I just finished this morning
and a card I made with it
so enjoy:)
Frannie
I've cut them out as you can see but haven't used them yet. I laid them on black card so they are easier to see
My challenge is make a topper or stencil using Inkscape and clones which can be found under the edit menu.
There's a tutorial here if anyone needs help. If anyone wants to join in and hasn't got Inkscape it can be downloaded free from Inkscape.org
I've added a couple which I've made and they cut fine
Here's mine.. Sorry a bit basic But I have done it this month...:lol: Oh and just to add I am the first too hhahahahah
Don't know how you can call that basic Tina - TFS. x
Here's my effort, hope its right, not done the clones before, lol. Not cut yet either, so hope its ok. :ph34r: