i have uploaded a birthday card, it has a mickey mouse head cut out of it!
and cuts lines inside for a photo,
enjoy
Printable View
i have uploaded a birthday card, it has a mickey mouse head cut out of it!
and cuts lines inside for a photo,
enjoy
here is another birthday card, with two hearts! cut out!
enjoy
happy across top of card and birthday down the side
Font used is Tristan
A card I made for my son, I got robbie to cut the decoupage as well
Hope this helps someone
This is on the same theme as my 'With Love' card. The letters etc are in different colours from the base card as you have to cut them separately but I guess that's stating the obvious and you don't need me to tell you that !!
Thank you for the kind comments about my other card - I don't feel quite so daunted about posting on here now.
Shirley
Not a letter card from me this time - thought I'd try something else !! Hope you like it. I used my Cuttlebug to do the embossed background.
Shirley
Hi all, I know this is only very basic but I thought it may be useful for some of our newer members. It's just the word BIRTHDAY along the edge of the card, done in the font Keep on Truckin'. This was prepared in Illustrator, transported as a DFX and then saved as GSD.
Sorry I can't advise the settings as I cut this on the Pro but it didn't seem to stutter along the way. It is almost A5 size but can be reduced or enlarged if required. Please feel free to use this in any way you wish.
I've put a picture of a basic card I made just to show how it looks. The word HAPPY wasn't cut on Robo which is why it's not a matching font.
I hope someone finds a use for it.
Hi,
Another one on the round. Not the prettiest card I've ever made, but I just grabbed the nearest card and paper that matched.
Designed in Inkscape, Storybook font. Finished in Robo.
ErikaP
Envelope GSD http://www.ukscrappers.co.uk/boards/...4&postcount=11
I made this as a Birthday Card but it would be suitable for a Get Well card too I think. I designed it in Illustrator but have cut it in Robomaster and it cut fine. I used hammered card for the base and thin card 160gms for the embellishments. I've split it in to 2 files to make it easier for cutting. The flowers are not uniform shapes so for easier lining up try to transfer them to the base card in the position they come off the carrier sheet otherwise you will have to keep rmoving them round to fit the outline. I made the backing paper to match in PSP and am attaching a copy in case anyone would like it.
Shirley
Hi,
Helen asked for this one
Not sure if I posted this or not. I've tried searching the templates and haven't found it so I'm going to put it on now.
Everyone who has seen these cards in the flesh agrees that the pictures don't do them justice. Trust me the effects you can achieve are stunning.
Enjoy.
ErikaP
Hi all,
Been playing whilst here in hot, humid and muggy Dallas. I've got my laptop, but obviously not Robbie, with me.
Did this template last night.
I've added a screenshot, but if anyone would like to have a play, I'd love to hear/see how it looks.
Designed in Inkscape, traced and tweaked in Robo.
ErikaP
Picture by kztmiz
Been trying to think of new ideas and came up with this yesterday. I cut the base card using hammered card and used thinner card for the letters. Hope you like it. I think maybe it looks a bit plain perhaps it could do with some embellishments but would like to know what you think of the general idea.
Template made using Illustrator.
I made this as a Birthday Card but it could be used for other occasions I think. Designed in Illustrator but it cut fine in Robo. I used thin card for the flowers and the scalloped oblong with thicker card for the base, which I cut twice.
Hi
Here's my first template! I designed it for my Dad's birthday card, (and the lace bit is heavily inked!) but I'm sure with different colours it could work for anyone!
It was traced in robo after being designed in Inkscape.
Hope someone can find a use for it...
Personal use only please!
Finally got around to making this. DS received a similar card and I knew it must be possible on the robo so here is my version.
Hope it comes in handy.
Female version of the birthday boy card.
Haven't made up one to photograph - hopefully I will get time later but here it is.
Here's my attempt for EricaP's 10 min Challenge. It definitely takes less than 10 mins to make.
Fold card in half once cut (Cut the pale blue line in DM as pounced if you want to, or just fold the card by hand) then stick a piece of coloured paper behind the front of the card. I just stuck it at the top so it hangs out a little bit from the stencil when the card's standing up. I'd look really nice with metallic card or paper showing through.
Hope it's of use to someone. I got the idea from a card I saw recently.
Hiya :) a print and cut card that would be suitable for almost any birthday especially good if you get caught on the hop :) the card is 5x5 square hope someone will be able to use :) and a big ty to Erika for the challenge:)
love n stuff
Frances
xxx
Happy birthday card with rounded corners and matt
My eldest granddaughter needed a quick card for a friend so I did this simple matted card and was quite pleased with the result. It is made up of different size and shaped mats layered on top of each other. Two of the mats have been "cuttlebugged". The wording can be changed to suit whatever occasion. The font is Brock script. I have managed to make a reasonable conversion so the GSD file is included. Sorry about the poor quality photo - I used some holographic card and it has caught the light!!
This is my first template since I got back from holiday. Nothing fancy but I'm trying to get back into the swing of doing them again !!
Shirley
Have been playing with lattice in DM & finally got one to go together. Afraid this is only in gra and I won't have a chance to cut it for a couple of days, but hopefully it should be ok. If anyone wants to convert to gsd please go ahead. Have tried to include screenshot.
There's always A Birthday Now Spring is here, I have added this today you can view it here
The Daffodils have the 3d effect I have filled the middle with silicon glue and added a open paper rose.
Thank You for looking
Tina xx
.
Being quite clumsy :rolleyes:, I can get a bit frustrated when I’m trying to position cut-out text exactly where I want it on a card, so I have tried to design a template that will eliminate this problem for me. :unsure:
The text on this card is created by overlapping alternate layers of plain and patterned paper, which can be lined up and fixed in place (even with my banana fingers) quite easily. Also, by only applying adhesive to the large oblong pieces of paper that the text is ‘attached’ to, the problem of unsightly glue seepage round text edges (another of my shortcomings :wacko:) can also be avoided. :D
The attached cards were made using only patterned and embossed papers, and a couple of border peel-offs, so they were very quick to assemble.
Hope you might find this template useful too.
.
Well this is my first and only Filigree Took an age:lol:
hope you like
This Paticular Door Card Is Unique to the other's in the range I have done, This has Two mini door's on the back of the card for you chosen Sentiment.
Which I have included one if you would like to use.
I have cut from perfumed card and decorated with ribbon through the slots, liquid pearls to the lattice, and mulberry paper roses, I have also use the cuttlebug embossing folder Swiss Dots as you can see.
Also comes with a box template
You can find it HERE
Thank You for looking
I've just designed my first pop up insert for an Oriental card I've made. Designed using Design Master, hope you can make use of this. The pink lines are not cut out but dashed ( pounced )
I'm really pleased with the way it has turned out:lol:
If you click on my camera you can view the 2 cards as well
Ann
PS For anyone who would like the GSD file 2magpies has converted it for me. with thanks
Hi!
Another one this time it is just Happy Birthday!
So can be used for anyone.....
Sorry GRA
Hilary xx
Another Birthday door card with Zig Zag lattice to the front Inside has a swirl heart and a place for your sentiment...........
you can find it here
Thank You for looking
Another for you to use... Hope it's ok for at least some of you:rolleyes:
I have made this card which is a variation of the one with the star. It cuts fine. However I have not mastered the art of making the toppers for it. So I sprayed the letters with glue and sprinkled it with glitter, I used flower embelishments for the flowers. Hope it is useful for somebody.
OK last one for today should really be working not playing :)
Font is Ball park and is free
Hope you can use
the site to download challenge font is still down :(
then I remembered I'd made this (and thought I had uploaded it but after searching the template section I couldn't find it :wacko: so I am uploading again sorry if I missed it and its here twice :()
Different from Christmas :D
we still have Birthdays comming up
you can find this one here
:thanks: For Looking
This is different from the Mother's Day cards :lol: It's for a Birthday Instead...
Consists of 3 lots of templates to make up the required card, has lattice, vines, and baskets for you to layer as you please. Also it has letters down the font of each side of the card and once each side of the card is brought together it says Birthday.
I have cut from perfumed card as it's double sided and no matter what you cut you can use the pieces either side. I used my birds and swirls embossing folder to the piece of card inside to give a bit of texture.
I have also added the flowers to decorate which are NOT included in the templates.
You can see it here
Thank you for looking
Been playing again something different this time, I just hope we don't have one in the files already.
The font is Amaze
I've been thinking B) and just had to try it out.
This might look at first glance like the previous card, but there is a slight difference and it isn't the colour :lol:
Hello! This is my first monthly challange, I hope I will fit well in your cr designing club!
this has 3 layers and each needs to be cut on a different piece of paper...its a beautiful card (from my point of view) I have included some instructions in the GSD file. Hope you like it and maybe use it.
Cut the 3 layers out and stick them together and you will have this...:wub:
enjoy
Still snowbound so this is today's effort.
You can find it here
Thanks
Shirley