Hi,
I don't know if this will be of any use to anyone. I am a new CR owner so am just having a play. Apologies if this has been done before.
Lisa
Printable View
Hi,
I don't know if this will be of any use to anyone. I am a new CR owner so am just having a play. Apologies if this has been done before.
Lisa
Inspired by Shirley's Get Well Card here's a 12 petal flower. Just resize the whole group to make it bigger or smaller so both layers resize the same size.
It cut clean with my Roberta Pro.
They do not fit perfect every way. The easiest way is to find the straightest petals and then line them up that way
Deb
I always loved the graduated 16 petal thick cuts daisies, but could never find a GSD design for them. It took me a while, but I created my own.
Hope they will be of use to someone.
Marie x
I've downloaded some lovely designs from here this afternoon. Thank You! to everyone who's generously shared their hard work.
My offering is my star flowers template, (5 and 6 petals). The flower looks nice on it's own, or with two layered on top of each other.
I have included a close up of one of my flowers, on it's own, and then on a finished card. If you curl up the inner petal, and curl down the outer one, it looks really effective.
Sorry! about the camara glare. It's because I used a foil card for my flower.
Marie x
A few people have admired the flowers on the scallop tri fold card, so I thought I would upload the template for them.
There is a 6 cm, 5 cm, 4cm, 3cm, and 2.5 cm flower.
I layered the large one at the top with 2 x 6cms and 2 x 4 cms with sticky pads between.
The two sides were done using 2 x 5cm and 2 x 3cm.
I have put various sizes on the template so that you can copy and paste as many of each as you want. The layers can be made up in various sizes.
The file for the card is here
Here is the poinsettia layers that I drew in Photoshop and traced in Robo Master. Hope someone can use it!
Pam
Poinsettia or flower? Photo added now
I outline the petals with quickie glue and glitter. The smallest and largest I use a glue pad and glitter (crystal). I have done them in red for christmas and white as well.
Without the base it makes a neat flower as well.
Hope someone can use it.
Pat
I have done this template with Jenni's permission. It is the folding flower talked about the other day. It cuts well and looks really nice. The dotted lines are the fold lines.
Pictures by scousemouse
I worked these out a few weeks ago, Jenniwren's reminded me! Some simple folded flowers and some pinwheel windmills.
The flowers have optional folds along the petals, I added brads in the middle. Blue lines are mountain folds, green lines are optional valley folds.
The pinwheels
have no creases, just bend all the corners into the middle.
http://i123.photobucket.com/albums/o...e/cards076.jpghttp://i123.photobucket.com/albums/o...e/cards077.jpg
Pinwheel GSD provided by christine mckie
I thought I would post my Sunflower, it's not brilliant but I learnt lots whilst creating it.
I cut the flower/petal shapes from yellow Bazzil card, chalked the edges and then layered them on top of each other. I cut the lattice centre from Black card, stuck it onto a large foam pad and sprinkled Bronze glitter on top before sticking it onto the petals. The stem is a kebab stick coloured with a green ink pad.
The file was created in DM if anyones wants to convert it to GSD please feel free. ( I don't know how...)
Hope it's of use to someone
Sarah
file converted to GSD by Lindyloulou
Here are the files which go with the flowery frame and small butterfly. Sorry it took so long, but I had problems converting the oval mat to a GSD format. It still isn't perfect, but it's the best I can do I'm afraid. It will need careful lifting from the carrier sheet because it is quite fragile! The flower is quite big, but you can resize to whatever suits your purpose. I have cut the GSD file and that is what is shown on the thumbnail. I have chalked alternate layers of the flower and I think it gives quite a nice soft effect. I do like chalks!
Here a flower I did,
I was at a garden centre the other day and spotted the whirligig osteospermum which has these funny little extensions on the end of the petals. Thought it would make a nice unusual flower template so here it is if anyone can use it! I used 2 of each size to make the example and chalked alternate ones to give a bit of colour!
Sylvia x
Perhaps it will be useful to someone
Hello !
I offer you my flowers to cut and fold :
http://img201.imageshack.us/img201/1...flo1gq8.th.jpghttp://img201.imageshack.us/images/thpix.gif http://img201.imageshack.us/img201/2...flo2vc0.th.jpghttp://img201.imageshack.us/images/thpix.gif http://img146.imageshack.us/img146/6...flo3ci5.th.jpghttp://img146.imageshack.us/images/thpix.gif http://img146.imageshack.us/img146/3...flo4cc6.th.jpghttp://img146.imageshack.us/images/thpix.gif
fichier gsd
Started out as hearts but ended up as flowers
Hi Ladies,
This daisy from the star on graphtec design master as probably been done before, but i wanted to see if i could do one on my own,also checking to see if i had done the print screen right, this is only my second attempt at doing designs, so i hope it will be of use to someone, i have cut it out so i know it will cut okay. Thank you for all your lovely designs, hope to one day be as good as all of you.Anne
I have had a word with Rosemary and she is OK with me posting this strawberry box:)
I have been working on this card for a number of weeks and have finally completed the assembly instructions for all of you to enjoy. Not the simplest of cards, but well worth the effort! Rachel
Text and overlay for this can be found here
Hi,
Thank you all for your encouragement.
I've been messing about all day and made a few more designs.
This first one is for some layered flowers. One of them is similar to a punch that's very popular right now.
converted to Studio format and simplified for easier opening
I made these flowers this morning when I needed some for a new project.
These flowers are adaptations of a file I uploaded many moons ago and subsequently deleted along with many others of my files, when all the hoo-ha with the copying and selling of files was going on last year.
I cut the whole sheet in 120gsm white. I then chalked them and used pinflair glaze to set them (the shiny glare is the reason the leaves look patchy in the photo). I used gingham brads for the centres.
Ruthan
This is an adaptation of the leaves I uploaded a few days ago. These are more 'oak-y' in shape.
I cut this batch from Conqueror Silver mist which has a bluey tint and coloured them with H2O's and the shimmer of the Conqueror shows through beautifully. I cut the flowers from the Pink Dew Conqueror and tinted it further with a dilute pinky purple colour and again the effect is remarkable.
The card is for my granddaughter Alice. When I cut the boxelope with the window I used Robo v5 (posted one is v4) and used the new weld function in the update to make her name in the middle of the cutout piece. It was so quick and simple and cut with no problem of stuttering by robo. The acetate overlay on the card was cuttlebugged.
Ruthan
Playing with the idea of Conqueror Concept and Cosmic Shimmer waterpaints I decided to make a poppy. I used the pinkdew for the flowers and silvermist for the leaves. The files cut beautifully with no problem.
The centres of the poppies are simply the large fabric brads glued and covered with black Flowersoft. Great representation of a real poppy centre.
I am thinking this cutting file could easily make pansies by colouring them purple and shading to a pale centre with a yellow centre'
Again I am stunned by the effects of the card and paint results which I just stumbled upon as I was experimenting with colouring the gerberas posted a few days ago.
Ruthan
At first glance these flowers may seem to be the same as the poppies - not so - these have 6 petals and have dips in the tips of the petals. The file cuts very well.
I swamped each petal with cosmic shimmer watercolours then took a clean brush with plain water and made a few strokes from the centre and blotted whilst wet since anemones go pale towards the centres
The fabric brads are covered in black flowersoft but unfortunately the glue dried clear and let some of the original colour shine through - I think next time I will use a black marker pen on the fabric before adding the flowersoft.
Ruthan
Thanks to Dixie for the challenge & to everyone for their lovely designs so far.
Using Inkscape, I played with the Union (equivalent to weld) & Outset tools, & made a layered flower with a mat. I used the shape tool to make a three ‘petalled’ shape which I used with a circle to make the flower. The flower has holes in it so it can be put together using a brad.
Whilst making the layered flower with mat for the challenge I realised that the mat would make a great distressed layered flower once I had tweaked it using the inkscape offset tool! After cutting the layers you can scrunch them up, distress them with ink or paint, & use a brad to finish off the flower.
Here is another design just using elongated ellipses welded together. It's my Crazy Daisy.
Build up layers to make a realistic looking daisy. I used four layers - two large and two smaller ones.
For Mary Anne especially -
I chalked my petals instead of glittering them and I added stamens - the instructions for assembling are here. I think it would be easier to colour the petals before assembly.
Sue
Thank you for setting a great challenge Grace, and for your gorgeous templates - just love that cat. :thanks:
Hope this rose will be of use to someone.
Search words: paper piecing, pieced, piece, rose, flower
This is the first paper piecing I've done and it looks like it was made by a child but I wanted to enter the challenge so please don't laugh too loud:D:D
Sorry about the shine on the card it's from the camera flash.
Although the svg has a square box in front of the name it does open properly (I'm using Google Chrome and it must be the way it shows the those files)
The font pansies4sheila2 lower case 'a' used. Hope someone can use it.
The leaves are actually green, sorry it's not a very good image (scanned rather than photographed)
i hope this works
I saw something similar on Youtube the lady used a plastic template and punched the holes for the brad. The sizes she used were too big for what I wanted so I drew my own heart and resized them.
She sprayed them with something she had made which looked like the equivalent of glimmer mist. Then squashed them up so they looked like Roses but I wanted a flat flower. I've made it in two colours so it shows up
Somebody on a different crafting site asked if anybody had a template (to hand cut) for the image below (not my own picture - I have cut it out but not taken my own pictures yet). I love having a go at anything 3D and came up with this. I hope you have a use for it.
Again, if anybody would like the DXS file, please pm me.
3D starflowers2 is nr 2 of a serie called 3D starflowers.
These flowers are made with broderie and halfcuts. The halfcuts (open shapes) must be popped up and curled to be 3d. The blue centers can be cut from the same layer, cut from a different paper and glued to the center, or it can be a gem instead of a cutted center. These flowers are solitudes accept the blue little only broderie flower on the right. That one must be placed on a digital card before cutting, or you end up with only cuted holes.
hope you like it.
hugs, gerti
Here is a barrel Ifilled with petunias. Hope you can use it.
I will post the petunias in a separate file.
I have one that's probably not what you are looking for as its not a robo template. I made it for my daughter's last birthday card (see attached). i made it out of parchment paper and hand coloured the parchment after cutting out.
Sharon
This is my first robo project, hope you'll like it :rolleyes:
It is print and cut thing (.GSD). Tested
After cutting you have to glue petals and then put it all together
http://img-fotki.yandex.ru/get/5801/...af5e7763_S.jpg http://img-fotki.yandex.ru/get/6002/...3e64d5e3_S.jpg http://img-fotki.yandex.ru/get/5602/...a7c7119e_S.jpg http://img-fotki.yandex.ru/get/6002/...fc6a2a07_S.jpg http://img-fotki.yandex.ru/get/5601/...ade0087d_S.jpg http://img-fotki.yandex.ru/get/5902/...42dc0b6e_S.jpg
Another one from me, the card shape isn't included sorry
Something unique and very special for Mother's Day.:D I have designed this from scratch in inkscape and cut on my beloved CraftROBO from Conqueror concept card. Colours I have used are Pink Dew, Gold dust & Golden Haze.
I have cut & assembled every single rose that is attached to the flower ball added some flower soft to the bottom for show purposes. And oh my it's taken me hours to assemble :lol::lol: but it's Beautiful!!!
Has a Surround at the base with Mother cut out adorned with open hearts.. come with Box for you to give as a gift.
If you would like to make your Mother a very Special Gift this year that won't perish OR wither away.
you can purchase YOURS HERE And as always Thank you for your visit..
http://www.ukscrappers.co.uk/photopo...9/TF123web.jpg