Thank You Cards and Toppers

first try at one of these edge things, thanks mainly to a very good tutorial by susibe.
thanks for taking the time to write down the instructions.:D
Sugar


tried and tested

Here is a thank you card I made for a Bazzill only challenge. Hope someone can use it.

Edited to add. The font I used for the X's and for the work thanks is called Flat Tyre and was a font of the week on UKS I think in May or June 2005 so you should find the link in the library.

ok while we are on the subject of thank you's and books try this one cuts like a dream and quite fast as well.

Horizontal and vertical Thank You card - please resize as you want - font used Tristan

Needed a thank you card for a fella, so did this one, Very basic but can be dressed to suit.

Erika P popup

Thinking outside the box now!
Another one for the bits box.

ErikaP

Hi all,

here is one of my recent templates for a thank you card, please note it is for personal use only!
the daisy is included in the GSD file but it will need reducing if you want to print and cut on one sheet, or cut seperatly on another sheet. the square background can be cut with scissors like i did, or on CR.

hope you like it and can make use of it!

regards

rob

This is a template I had a request for from Tracy (Pearman) but I thought perhaps someone else might find it useful too.

Shirley

this cuts beautifully

TRIED AND TESTED

This is my first welded word card. Hope you like it. It is a 5'' x 7'' card and there is also a file for a decoupage box to fit it. The backing paper is also one I made using Print Shop Pro and I am uploading that as well.

I used pink vellum to cut the backing for the lettering and to cut the shapes to make the flowers to which I added a few embossing strokes.

I have also included a cut for an inner lining for the card.

Check your cut line settings to make sure you only cut the element you are intending to cut.

Thought this might be useful at this time of year !!

Shirley

Here is another teddy card. It is DL wide in format. The teddies are cut separately and there is separate headpieces to decoupage. I added some googly eyes as well as a top and skirt and inked in the features.

I have made this as a thank you card but you could very easily change the cut message to whatever you need.

If you want the fur print it can be downloaded by 'rightclick' on the pic and then 'save target as'.

You will need all three files to complete the card as in the sample.

Just for info the base card could have anything as a decoration not just the teddies as there are supports to which the teddies are glued so put a ship or a heart or a flower or two, whatever you want!

Ruthan x

A quick thank you card. Cut on A4, fold in half, attach an inner sheet to write on. Finished card in under 15 minutes

Very delicate topper for a special thank you card.

Cut from Conqueror Concept papers in cream, pale blue and white.

You need to ensure that the pressure is just right when cutting this, to high and it will snag. Also keep the speed slow.

Designed in Studio and traced in Robo for the GSD file. Font is Freebooter script.

ErikaP

thought id have a go heres my attempt quick cut and stick im afraid card was a bit fibrous symbolises all the designers on here

Well that time of year is here again, All the children will be leaving there teacher's to go up to another class

you can find the card here in the Childrens Section

Finally I have been able to produce something for the monthly challange. I hope somebody likes it!

I made this file using my Pazzles Inspiration and I have cut it using my PI, but I also converted it to GSD, but have not yet cut using my "Roberta". I used it for a card that I made for my youngest son...if you want to see the details, please check it out at my blog. I hope someone can use this!

A simple and quick Thank You card which might be useful this time of year !! The font is called Cuckoo.

Shirley x

Another to add to your collection, this one is for all Thank You's that obviously need to be done sometime or another.:D
The inner's to this card are quite different from the rest as the glasses and the bottle has flower's intergrated in to the design, Looks quite nice and very Different to normal stuff.

I have Designed cut and assembled :D

You can see it here :thanks: for looking.........:D

I have done this one for the challange, it is pretty basic but it cuts great. all the dingbat info is on the template along with the font info.

:love:Sharon:love:

A Thank You Card - could come in useful this time of year

Shirley

A curved edged Thank You card. Thought it might come in useful this time of year.

This is a conversion from .svg to Studio via AI.

Thought this might come in useful for saying thanks for all those Christmas pressies etc. If you'd like the backing paper you can download it from my blog as well as gsd and svg versions of the file.

I'm not sure whether this really works or not, a bit of an experiment really! Once I had cut away the corner of the card I wondered if I might be able to put the cut out daisy panel on the back of the card so it was just above the cut away line on the front. It was a bit of a fiddle to get it reasonable and I may have another go at it 'cos I'm not quite satisfied with it yet. However, it's not too bad and it's a bit different. The text requires great care when lifting from the carrier sheet. I have included a mat for the text, although I did not use it. Hope it's of use to someone.

I've designed this to thank the staff who have been giving such wonderful care to my hubby (who is making good progress and thanks for all your good wishes, it means so much to me).

I've done the central motif as a stencil, but if anyone prefers I have also included it in mat form together with the outline. It's a fussy card, but I was pleased with the end result.

Thank You cards are always useful this time of year and this is a popout style. If anyone would like gsd or svg formats you can dowmload them from my Blog

Another one suitable for valentines day

this is for my sons and new daughter in law.
placement is just right for a 15 x 15 cm card

A quick Thank You card. Gsd and svg formats are on my Blog

Needed a quick Thank You card for a man, and came up with this topper idea. Hope someone else might find the template useful. B)