Cut well in 160grm gold card - bit fiddly to get off carrier sheet!
Susibi
Printable View
Cut well in 160grm gold card - bit fiddly to get off carrier sheet!
Susibi
... sort of! Two arched windows: the outlined one with red lines will cut as an overlay with an opening window the all black one as a simple window cut out
Susibi
I hope this makes sense lol!
Hi,
Saw an idea for something similar and thought I'd do some of my own designs for Robo. We all have bits and pieces of paper we don't want to throw away, as well as bits of embellishments and peel offs. Here's a chance to use them up.
Just done 2 at present but think the idea can be extended to other shapes.
Hope you like
ErikaP
My first template for the robo hope it is of some use have included example once cut
it may need tweaking in places
Hi all
Here is the first ever template I have created. Not sure if anyone will use it as it is very Egyptian but if you can use it please feel free.
The font I used is Papyrus (egyptian feel to it) which is a free font.
I have put a Happy Birthday sentiment but could be used for any occassion.
Remember to change the output settings if you want to cut the outer edge.
Cath :)
Hi all,
Should have been working on my website, but got distracted as usual. Been asked to make a card for someone who's leaving France, so came up with this.
A little romanticism in the overall card, but who cares!
The inside is of course one of my pop-ups.
Hope the lettering is useful for someone.
ErikaP
Just finished this , i have cut it , but had the wrong kind of acetate and it snapped !!!
Some filligree design I made. Enjoy
here is a topper that made a few weeks ago
again i cheated using tubes from the site i am a member from and i have permision from him to sell any designs i make from them. so i am going to copyright these once i have a few. although i know that u can pay to copyright them up front so much for how many you think u are going to need copyrighted.. I hope u like them.
these are freebies so that i know if anyone likes them. if so i will carry on with them.
Acorn
this is not print and cut .
just a topper
I hope some of you may find this useful.
Anjie
I've updated it with instructions.
Anj
Here's the third one. As said before the pic is only for an idea of how it looks put together on a card, it is not a finished product, lol.
Hope you like and can make use of it. :D
Here is a little thing I made a couple of days ago. I hope it will be of use to someone.
I'm back on the clones
Hope is useful to someone... Haven't tried it yet on cr...hope it's ok...:rolleyes:
If you use a different color and stick a photo in the middle, it's a entirly different card.
Well heres my effort. Its pretty basic compared to the rest of the contributions so far. I thought I would do something for all those who aren't lucky enough to still have their mom's. Not being a Scrapbooker I don't really know if it would work as a LO but maybe as a Scrapbook cover. I am going to use it to decorate the lid on my Nan's memory box.
Used Saru's flowers font and for the writing I used Freebooter Script. Done in RM5.1.
Another of those files which can be used several ways, so I am hoping this wil find some fans. It can be used as a decorative jacket, as a shaped inner and a pop-out (choose your own shaped aperture to cut). I've left the samples plain so as not to hinder your own ideas.
You can either cut as blanks or fill with a pattern. After cutting fold BEFORE you cut down the dashed lines with scissors. Remember to fold point to point:)
Back to the clones for me, this is made with Saru's Flowers ding
Sorry Lucille and Hazel I don't know what I meant :P
Hazel dings come from below:D
Here's another ding called mixedbag from dingbats uk
Simple butterflies topper and mat. The dingbat is butterflies.:lol:
Not very well at the moment so this has taken me a while to do. It 3 different images from 2 different Dings, the info is on the template, but as its been worked I don't think you'll need the fonts installed anyway.
whilst looking for something else, I came across this template which I never uploaded.It was made for the May challenge 2010 or 09 and I must have forgot about it.
Hi Im getting better at this, my second template!!
I have been making a mini flag banner and so needed a scalloped trianlge so made this.
Hope its of use to you.
elaine xo
This topper is for A5 cards. Fold the wings up on the alternate butterflies that remain in the card.
You can then embellish the front of the card how you like.
The picture is not best in pale blue, but that was the card I test cut it in.
Floating butterfly topper. Cut's fine, I've put black card behind it so it shows up better. If anyone can use it
Here's one more from me
Here's an easy quilt topper for you. I included instructions and a placement diagram in the silhouette file. Enjoy.
Here's another quilt topper. This one shows how it looks when you emboss it after it's been assembled. Enjoy!
And yet another quilt topper. Instructions are included inside the silhoutte file. I hope someone can use it!
I made this for my BIL’s birthday :wub: influenced by all the lovely Jubilee themed cards that are around at the moment - and the WWII poster slogan “Keep Calm and Carry On” of course. :lol:
The topper is cut in four separate layers (see the attached image) and the wording reads “Keep Calm & Party On” when all the layers are glued together. I used fairly thick sticky foam pads to mount the assembled topper onto a cuttlebug embossed background.
I have also uploaded a template for the layered Union Jack flag topper without any words attached, in case it would be useful on its own, or to weld your own words to. I have attached a 'how to' image if you need it. :wub:
SVG, Studio and GSD files are included in the zip folders and I hope they might be useful. :unsure:
.
Well with the Olympics starting during this month's challenge I thought we would have a go at something completely different!
Using the layout of the 5 rings logo as inspiration (did you know that the 5 different colours represent each of the 5 continents), create 5 shapes in the 3:2 format which can be filled (like the 4 generations layout) or used to create an interesting shape that tessellates in the same 3:2 format and then decorated. They don't necessarily have to overlap or interlock, just look good together.
I have included the file for the border and a page of simple ideas but think outside the box, 5 flowers, 5 balloons, 5 christmas trees, think line art, think patchwork, don't just think cutting but printing as well.
This is a challenge for both scrapbookers and card makers etc and it can use lots of 'processes' - welding, bringing forward, sending back, rotating, mirroring, filling, changing line thicknesses ......
Lets see where it takes us - have fun and create!
Sue
Snow scenes from last year and earlier this year. The middle one on the top layer shows the icicles hanging from the guttering outside my bedroom window.
I've had another thought about the photos so I've removed them and will replace with the others when I've cut them later today
I decided as they were snow scenes (some of them night time) I would use one of my snowflake frames. I can't get a good photo so I'm adding a screenshot but they cut fine. I can't get the files to upload even though I've zipped them in 2 seperate folders, I'll try again later Ok I've reduced the size even further but I still can't upload them so I've had to give up sorry.
I've had another thought (two in one day LOL) it's the photo's that are causing the problem so I'll upload just the frames and you can see from the screen shot what I've done, sorry it's such a long post .
I designed this card for one of my brothers in law who has a birthday next week as he really loves trees. I find male cards very hard, but thought this would be 'blokey' enough for him. :)
I thought I'd upload it here in case it would be useful for anyone else.
As usual there are SVG, Studio and GSD files in the zipped folder along with assembly instructions, and I have included a 4½” x 5¼” card and plain box template too. :wub:
.
This is just a quick card I thought maybe useful for someone like me who needs a quick card for tomorrow. xx
Hope this will help you bobble21
I designed this card in Silhouette Studio. The topper was painted with pearlised acrylic paint (got it from Lidl a while back) which makes it look like hammered metal. I used white card embossed with Swiss dots as a backing, layered onto blue and then sage card from my stash. The Font is Cooper Black.
bin playin' :P:P :lol:
and playing again :P:P