3d Models

These baby shoes were adapted from a template from
bydonovan.com/templates
Took me ages but think the results were worth it.
Also admit aspired to proceed with it, by Erikap who has given us loads of fab templates, especially the lovely girl shoes :wub:
instructions
1st fold back all tab lines

2nd attached top end of shoe to back end of shoe

3rd fold the strap to the place indicated, this will give you basic shape of shoe

4th Attached sole with glue (or patiently small bits double-sided tape.

To tidy up, attached another sole to boot to hide all messy work

5th Attached strap

Search words - boot, shoe, bootie

Here you go, not sure how acurate your template is so may need tweeking, i prefer to do by hand as i can use fewer nodes and cutting is quicker and less noisy.... but everyone to their own!
I have added a few more cut lines around the heel to give a better curve, and you may want to cut an extra insole to cover up the joins !


Good Luck !

Lis

Attachment 62277

Search words - boot, shoe, bootie

hope this can be of use its based on the arty farty cot template but has been totally change for the crafts robo and modifide a bit for the better i think lol you have to cut the base buy hand as i never got around to it
or you could make it smallerand fit it all on a couple of pieces of card
this one uses 3 pieces

Search words crib, cots, cradle

This file had a cutting problem, which has been fixed and re-uploaded by Lucille with the designers permission. I have not resized anything. Please note that you may have to resize as it is very close to the edge of the print area, to cut any design it must fit within not only the red cut area, but also the black print area. If you do resize;

copy and paste all parts of the design into 1 document
zoom out
select all and use the corner handles to drag the images inwards to make them smaller
you can now copy and paste them back to the original documents or keep the in 1 file and drag the designs on to the workspace for cutting.

Re-done the boy boot template with the proper dashes and works fine
as shown in the picture of the blue n cream boot.

Hope you enjoy it as i did.

I Just used wet glue, But think a tacky glue would be better as it grips quicker, But I didn't have any, so wet glue it was....

It is a bit fiddley but worth it in the end.
I decorated the shoe before I stuck it together.... (e.g. contrast)

1st - I push all the tabs up on the shoe base add glue, on the outside of tabs.

2nd - Add the front of the shoe to the base pushing the tabs onto the inside of shoe front using a pencil on the inside to help.

3rd - Add the back.

Once dried lace ribbon and lace up as normal....
hope this helps.

Search words - boot, shoe, bootie

Hi,

Seeing Tina's reminded me that I'd done this one ages ago. So whilst the family are quiet I'd thought I'd dig it out of mothballs.

I saw a picture of one of these somewhere on the web. It was more ornate and lacy but I decided to do something a little simpler.

The beads can be coloured in the relevant colour for boy or girl. The teddy is optional, you can remove it if you'd prefer something less ornate.

Enjoy.

A box for this cot is here

Search words crib, cots, cradle

ErikaP

sorry the picture isnt very good a lot of shadow

playpen designed and cut on CR I have used hammer card and glitter peel offs

Hi all,

Here's a cute one. There are other templates available, hand cut or Robo. Not saying this is better, but it's free!!!!!

You need to cut 2 of the box templates to put together. I have only put a window in one face, (means there will be 2 windows, back and front), which I think works well, but you can change it if you don't agree.

Happy cutting.

Excuse the photos, they were taken after the test cut. Not using the best card or decoration. I'm sure you can do better.

ErikaP

i made this in psp with shapes i am afraid i havent made it up to good but i have dammaged my eye with something and i just tossed it together maybe someone can tweak the pattern a bit to make it better .sonia

Uploaded for SJ Bayley

Thank you to Sarah.
xx

converted to GSD by christine mckie

the finished block is 2" square, if anyone wants to make more letters I used boxed in font.

Hi

This is the first template I have made in Design Master. Cuts OK but would like it to be a bit "smoother" and I have been fiddling about with it for hours!!!! Any suggestions anyone????

I had put Pounce lines in the carriage area and on the pram hood - I know I have to cut by colour and set the pounce lines length and gap - would it work - NO!!!!! Guidance PLEASE! I have been reading and following the instruction manual but am totally bemused by it all now.

Hyperpat

converted to .svg by Lucille

Well this is really special...............
A latticed coach built pram with movable hood, you can either have it up or down, Also comes with a little parasol for a sunshade.
Comes with a box template too for display or to give as a New Baby Gift
Designed By me , All Copyrights belong to me However you may sell your made cards/Gifts

You Can Find it HERE


Thanks for Looking

Beautiful Latticed adorned Babies Moses Basket. With Movable Hood.
Comes with a Box Template For you To Give As GIFT

You can Find It HERE


Thank You For Looking

This is a newly made template for that special Baby, has the normal bars at the front and back But with lattice hearts and small babies feet.
Scalloped front and back and has ornate styling to both ends of the cot which can be used if you want or if not leave off.
Big Bows also to front and back in between the scallops. Infact lovely and a Beautiful Keepsake for any parent.

You can see it here And the SALE on Templates still goes on:love:


Thank you for looking

Well I know Tina beat me to it but anyway I kept on with it and this is my finished version it is available on my HERE

Well this is my surprise for the year :lol: I am going to be a nanny for the first time and I am so excited I could burst........But there is one more thing to mention My darling Daughter is giving us TWINS :love:
I have had to keep this small secret as it was early days and My daughter is feeling still very unwell But thats the joys of parenting I told her...
Like I did for her wedding I have created something only with her in mind and of course the new to be arrivals...It is different than normal Baby things as I wanted something that wasn't out on the shelves as such until now !!!
The templates will only be available untill my grandchildren arrive which could be December and could be earlier these things happen when they are ready with twins.

So you can see the templates here You have a baby walker and a 3 wheeler Tricycle and of course a box..





http://www.ukscrappers.co.uk/boards/...ictureid=16316

Another troubled template conquered :D months of cutting and resizing and wasted card :lol: Now complete......... Cut from Conqueror Concept and Perfumed card decorated gently with Mulberry rose's...
The little swings do move with movement of the base or by giving a gentle push

Available now in GSD but to follow is AI, WPC, KNK and SVG for Cricut User's :D

You can see it here And as always Thank you for looking.....

http://www.ukscrappers.co.uk/photopo...Carousel_1.jpg

One for Babies, and quite sweet I think, I really enjoyed cutting and assembling this one it was so easy in comparison to my other pram templates, I suppose the longer you design the easier it gets to cut corners :lol::lol:

Anyway this was cut from cream perfumed card with pale pink trimmings, has a shopping tray underneath and a shopping bag to hang onto the handle if you wish. The hood goes up and down and the sun canopy can be used or not used it's entirely up to you...I have even done some wheel axles so it will stand straight once fully made........... Rather pleased with this :P
One photo with the canopy and one without so you can decide how you want to make it.

You can see it here and as always thank you for looking.....

http://www.ukscrappers.co.uk/photopo...medium/pp3.jpg
http://www.ukscrappers.co.uk/photopo...edium/pp11.jpg

Something Different here for the new arrivals............ 3d again

This I thought was another natty template and none around like this at all.. And don't you just love his hat :lol:

Cut from perfumed card with just a little decoration :rolleyes:

Forgot to add AVAILABLE IN GSD,AI, WPC, KNK, and SVG for Cricut user's


Thank you for looking:wub:

You can find it here

http://www.ukscrappers.co.uk/photopo...medium/st1.jpg

Designed with my daughter in mind, as most of you know She is expecting Twins later this year, and she will be needing one of these no doubt... I have cut from Perfumed card. It has small holes for ribbon to be threaded through each side as you can See I have done that... Has the Twins word down between the wheels :P

You can see it here :wub: And as always thank you for looking...

http://www.ukscrappers.co.uk/photopo...Twin_pram1.jpg

Yes it really does swing with a little push, And something so sweet for the New Born... and obviously to keep..

I have designed in inkscape and cut on craft robo.. from Lemon perfumed card.. I have embossed the babies cover inside the crib with roses embossing folder..

You can see it here And always Thank You for looking..





http://www.ukscrappers.co.uk/photopo...um/Crib_11.jpg

New year New templates....................................... I saw something simlar on the internet made from parchment and thought it would be lovely if you could cut with robo.. So I designed this by eye only :D

Special for New Babies................ I have cut and assembled one template and Jan has done the other to give you two peoples creativity..

You can see it here And it's gone straight into the Sale..
As always :thanks: for looking..


http://www.ukscrappers.co.uk/boards/...ictureid=20237

http://www.ukscrappers.co.uk/boards/...ictureid=20238

These again are a relist I have had them in my store for sometime but the pictures were never very inviting for people to purchase....
So I got my special lady Jan to cut and assemble once again to make them look shopable:) And she has done a wonderful Job....


You can view them here and Here Both are just lovely But I think the Sandal is more girly...

As always :thanks: for looking...


http://www.ukscrappers.co.uk/photopo.../shoes_006.JPG

http://www.ukscrappers.co.uk/photopo.../shoes_003.JPG

One for New Babies... or even a childs first Birthday.. Designed in Inkscape and cut on Craft ROBO... I have cut from perfumed card and decorated with Small mulberry roes and made some 3d fuschias just for the picture but not included in template..

You can purchase it here And as always Thank you For looking !!

http://www.ukscrappers.co.uk/photopo...m/DSCF5674.JPG

This is another Pram I have designed in inkscape and exported most of the design to retrace in robo master to cut on craft ROBO machine.
There is two different hoods you can use on this 3d template, One with a oval hood that layers and the other a square shaped hood also layered Both look just beautiful when cut and assembled, as you can see from the pictures below.
I have cut from white perfumed card and trimmed with peach, I personally wouldn't add much else to this design in regards decoration as it's rather lush now I think..And so different from any other template on the market..


Please come and visit here for your unique Design You will find in the baby section of CraftRobo, also includes a box template and a stand so the pram doesn't fall over within the box..

http://www.ukscrappers.co.uk/photopo...qaure_hood.jpg

http://www.ukscrappers.co.uk/photopo..._oval_hood.jpg

Well this is a very old template that I do not use anymore, INFACT it dates back to 2007, when I first was getting to grips with my robo. so who ever can use you are more than welcome.. My Terms of Use are included within the zip files which I would appreciate you taking note of.:)
You can use for personal use only please no reselling or passing to other forums..Or using my template to make your own.;)

A special Thank you to Doreen (DJG) who cut and assembled :love: as I just haven't had time and the picture I had was very old..Plus some changes made to the template.

I have tried to clean up the best I could as it first started as a DFX file template and loaded into robo master. so some of the cutting may judder while some may sail through the cut.

I haven't shared for a while I have just been so busy with life in general and spending time with my twin grand-daughter's so hope this will make up for that...

Happy Crafting

Another special design for a special new born... Just perfect and different for any Baby occasion.. And my 4th Pram design.
I have cut from Pink Dew conqueror concept card and no decoration as the carriage is very intricate..

Comes complete with box template.. as well as My Terms of Use for all Designs..

You can see it here and as always Thank you for your visit.;)

http://www.ukscrappers.co.uk/photopo...Carriage_2.jpg

This is something a customer asked me to design.. so here it is! it's also something I haven't seen on the wide world web for sale as yet.

Designed in inkscape and cut on craftROBO..Cut from conqueror concept pink dew with Silver inlays to show off the lattice work.. Has the sentiment of Christening.. and complete in a Hexagon box and lid..

If you would like The new arrivals name date of Birth as well as the Christening sentiment please feel free to ask ! I would be quite willing to personalise for you.

Just a little decoration is all that's needed here..

You can purchase here As always Thank you for your visit. :D

http://www.ukscrappers.co.uk/photopo...19/braclet.jpg

anyone doing a seaside LO? :lol:
to go with the marquee? :mellow: