This is useful if you can't manage to cut Bazzill in one cut. I cut it from smooth card. It's not quite as think as the proper ring, but works ok. Thickness of the plastic stand off ring is 0.48 mm, card is around 0.3-0.35 mm.
Karin
Printable View
This is useful if you can't manage to cut Bazzill in one cut. I cut it from smooth card. It's not quite as think as the proper ring, but works ok. Thickness of the plastic stand off ring is 0.48 mm, card is around 0.3-0.35 mm.
Karin
Hi everyone
Thought i'd share this, traced this a while ago just seemed to take time to fine tune it. Hope someone will find some use for it..
Lisa
This is a quick fix for all those small pieces of card lying around the room that you would like to use in your Robo. Make sure though that they are well stuck down before cutting.
Just draw your grid out first using the colours onto a plain piece of white paper first, just as a reference, then print it out onto acetate in your printer, make sure you get the right kind of acetate though, and for those that don't know or have never used acetate in a printer before there is a rough side which is what you print onto and a smooth side that you DON'T print onto.
Instructions for positioning the acetate are included in the file. Turn on your grid reference on the Robo Master program and place your image where you want it, make sure your grid is in ½ inch squares. Place your small pieces of card on your mat and then position your acetate directly on top. Just count the squares on your acetate against the one on the screen. DO NOT LEAVE THE ACETATE GRID ON TOP OF THE CARD ON THE ROBO MAT.
You soon get used to using it and then before you know it you just end up guessing after a while and hardly use it except for tight positioning.
Hope this helps.
Afternoon
me again - while investigating ideas for my Mum's 60th birthday card I came up with this!
She's going to love me lol
Corinne :)
Stamp/tampon
Directors chair, camera, film reel, clapper board.
print and cut, old fashioned flower girl.
kate :)
I was asked to do a snakes and ladder themed card and couldn't find anything suitable so made my own. Hope someone can use this.
I can not get the picture of finished card to upload.
I cut the domino's in cream card then backed them with brown.
Put the dad letters onto the blank half of the domino them put onto card to spell the word as if a game is being played.
I hope this makes sense.
p
Manage to sort something out with balloon. Not perfect as it wouldn't be able to fly with holes in, but just looked a soild mass without. Use artistic license. I wouldn't mind if anyone revamped it.
Jane
I have cut it to test, ordinary weight cardstock, pink cap, 2 'O' rings, speed 6, thickness 30 and it cuts great.
it ripped when I took it off the sheet so maybe a few of you could decide whether some of the lines are too delicate. I was using a new, very sticky sheet though.
Did this for my friends retirement card
as requested by Helenscot -hope its ok.
regards
Lin
Useful for the men. sorry haven't cut it so no photo
still need my "L" plates hope this is ok thanks to val for e-mail photo cant get my head round the camera yet jen
Made this card as a thankyou for my case worker Harbir in Perth, who helped me throught the maze of forms and criteria needed for my visa to emigrate to Australia (which I have just received) So I shall be moving towards the end of the year. Hope someone can use the template. Only in GRA I'm afraid. Hugs Iris xx
converted to GSD and SVG by Lucille
Hiya not sure if these will be any good to anyone but will upload then just in case :P
love n stuff
Frances
xxx
I've had a couple requests for this so here are some rudimentary instructions on how to make a dust cover for your Craft Robo. I made one for mine with this template. I have the older CR with the blue lid, but I'm pretty sure it will also work for the new CRs. If you have any questions about how to put it together, pm me and I'll try to help.
I have been sharing this file I made to fit a pack of gum-not sure if this gum is universal but this type is all over the states!
I drew these octagons to use with 3" x 3" patchwork squares - you can cut out however many you need.
done this ages ago all designed in robo have included the picture which was taken on one of our holidays
Don't know if anyone quills but if you do here is a template to cut some strips. I left them uncut on the ends for easier removal off of the mat. These are 1/8 strips.
just had to make a get well card for someone with a broken arm, also included one for a leg. I used bandage to make the sling and wrap around the leg.
Val
I needed a scroll for a graduation card couldn’t find quite what I wanted so I did this simple but it cuts great I used a pen to draw the detail but you could cut dashed lines.
Ink bottle with mat. Perhaps it could be something else with different labels or create a stopper and it could be perfume!:D
Hope this will be useful for some. In the photo it shows the straps having holes. I decided that the straps were better without them because fabricating a realistic buckle was a bit of a pain.
The blue line on the GRA file is to be pounced (if you wish).
Search Words: Birthday Card, Male, Men, Case
Here is a film strip I've made to use in one of my scrapbook pages....
It is the first one I have done, hope you like it and use it! :)
About to start on a card for SIL's dad, I have left a rectangle around the main image so it is a stencil, but I am going to cut it without and use it as a paper piecing. Hope someone else can use it too.
sorry for not posting files for so long time...:( I have so many works I don't have time... but now I made a set of quills for the Jane Austen swap and I'd like to share them with you... I haven't cut them but I suppose it will be ok!!!enjoy!:wub::wub::wub:
I hope you like this file!:wub:
Is this any help Petrina?
hope this helps
another SIMPLE one...please don't laugh again and if you do, don't tell me...:lol
this is the Display Table that I prepared, I think it looked pretty good. I just made this to cut windows out of letter size paper. It took me about 2.5 pages per side. The big red circle in the center was to resemble the Japan flag. I got the idea of adding the birds of a stamp I have on hand. The birds are a template made by somebody else.
Thanks for looking.
:lol:
For Ann
Hope they are ok
And a lattice horse shoe
I did a lot of fiddling about with this, and I'm still not satisfied with it. Hope it's of some use to someone.
Extra search words, paper piecing or die cut.
Hi, Hope this helps please do not sell
Many thanks:love:
Extra search words - footprint, feet
My son asked me to make these for him, they are for xbox shooter games, just dampen the back slightly and stick to the screen and use as a target bulls eye, Im sure the boys will understand what they are used for.
Val
My daughter was stuggling to get motivated to learn the spellings of french numbers from 1 to 20 yesterday; so I made a Lift the Flap French Number Chart (print & cut) for her. Hopefully she will be pleased when she gets home from school today :rolleyes:.
I used the following fonts: FamousBuildings, French Script MT, & Baskerville Old Face (I think the last two should already be installed on your PC already).
Loving the designs so far, thanks Ness72 & Shirley :thanks:.