ok here is the amended version.
ive cut it as you can see, would look nice with 2 back to back and hung from the tree maybe.
this is not a trace ive drawn this using shapes in inkscape and exported as a bitmap.
it cuts a treat.
Printable View
ok here is the amended version.
ive cut it as you can see, would look nice with 2 back to back and hung from the tree maybe.
this is not a trace ive drawn this using shapes in inkscape and exported as a bitmap.
it cuts a treat.
As Xmas is approaching fast I've put together this file, it's a slot together Xmas Tree for those last minute cards, boxes etc.
This is my version (not quite finished yet) which will go into JennieBean's Cot Box (thank you JB) along with some fake snow (White Flower Soft) and some glitter dust.
Hope some of you find it useful.
Originally Posted by MaryAnne
A mate of mine on linked to this snow scene. I am AMAZED it could be done with a Cricut. Thought you all might enjoy seeing it - and will hope for a CR version sometime soon LOL!
http://www.cricut.com/messageboard/t...ookieSupport=1
just finished the first tree ,not quite the same as in this piccy but lovely, camera not charged up so will add piccy soon.
i cut six snow flakes all in slightly smaller sizes, making sure each one had a small hole in the misddle.
i just used 100gsm copy paper for the one i have just done.
then i used stickles icilcle glitter glue on them, left them to dry.
once dry I curved over the edges of the flakes them carfully threaded them onto a coctail stick largest first., dsbbing a small dot of glue around the stick tohold it in place then put the next size down etc etc.
i have only put 4 flakes on the file so its would not be too big!
not sure where this flake came from as i just have it listed as sno flake, so if you recognise it as your work can you let me know and i will add it to the file , and thanks because it really is just the right sno flake for this !
Additional search word snowflake
Sorry I have not been able to upload anything of late had a serious problem with the computer, and then had to put CR away for Christmas etc
Anyone for a snowball fight?
Just finished this one cuts and fits together well.
I have made each different size a different colour.
It is a bit complicated to explain but here goes-
First take the larges circles and slot them together to form a sort of 3D cross.
Then take the second largest circles and slot these into the next set of cuts, and so on, right down to the smallest circles, warning it starts to get complicated the more circles you slot together.
You should end up with a complete 3D ball shape, which will fold flat if you want to put it into a card etc.
enjoy :lol:
I will try to get a photo later when DH gets home.
I know I know it's Christmas again,:lol: I can't help it whats come into my head can I:lol:
you can find it here
Thank You for looking
Another Christmas Offering.............
3D Christmas Cottage.
Sorry it's early :lol::lol:
You can find it here
THANK YOU for looking
This little "box" stemmed from the September Challenge. I wanted to try something a little more difficult than my cube that I posted for that. So here it is, a 10 sided prism. I have decorated it with a little glitter glue. It doesn't show very well in the photo but looks pretty under artificial light. I have made this in white 160 gsm card but it would look good in silver or gold, or whatever your Christmas tree colour scheme is going to be. There is a silver version with a bow in the September Challenge thread.
Suggestion for make-up: I used a bead (placed inside the form) threaded on a silver cord for the loop. It is a good idea to put this in first and needs to be placed in the side with the single tab fastening, then stick this single tab (this will become the top). Stick the rest of the tabs leaving the triangle without tabs until last. This will enable you to pop in a chocolate or little present right at the end. Place a "blob" of glue at the apex of the prism to secure the cord (or stick the bead at the top at the beginning of the 'exercise') Unless you have fast drying glue this can be a challenge so not for the impatient:lol:.
Mary
Well this took approx 6 months to perfect But now its perfect in everyway.
stands about 6 inches tall I have cut from perfumed card and decorated with small beads to th leaves it also has a angel topper to the top
you can see it here
Thank You For Looking
Another for the comming season and it's slowly creeping on us
hope you like
you can find it here
Thank you for looking
from the thread started by mary in the chat section
sorry its done in 4.4 version
Just finished this one. The photo doesn't do it justice, looks much better in real life. I can see it being attacked with some glamour dust or being cut from some irridescent or sparkly card.
I've put some instructions on the template, but if they don't make sense, just shout.
Erikap
I reconverted the gsd for this file. It comes out beautiful in Carolluk's
conversion tutorial.
I also redid the picture - I wasn't pleased with the first one - this one looks
a little more festive.
This does take two pieces of cardstock.
I found a light that rotates to three different colors. I know the kid's
at the Christmas shoppe will love this.
Since I don't have a mathmatical mind, I worked on the bottom until
my head hurt (many hours).
I wanted it to fold under so the pieces met at an angle into a perfect
octagon.
Anyone is free to play with it and change it!
Otherwise, I was able to fold it together with what I have done.
I used vellum inside the windows.
Linda
T'light inner by Celia Reed
I cut mine from gold and silver mirriboard... need to cut 4... and used them alternately(spelling). I know some mirriboard is a pain to cut but this was white on the inside so was probably thinner.
I've uploaded a screenshot as my camera needs new batteries
Saw something similar made in metal so designed my own for the CR :P:P
You could add small gifts and hang on the tree OR if you made enough pop in a small choc, add a tag to the top of each and use as an advent the kids will love the hunt round the tree to find each one.
Sorry Lucille they are not big enough for your Ferrero Rocher. :(
Saw something similar made in metal so designed my own for the CR :P:P
I thought they would make great decorations for the tree
OR on the table as place settings add a tag with names on
You could add small gifts or chocs.
Lucille- these ARE big enough for your Ferrero Rocher. :D:D
done in 4.4 version
made in 4.4
i had to make a christmas lantern for my grandchildren and it turned out ok so i thought someone else might be able to use it i put a small battery light inside.
i got the idea from a rubber stamp i have you have to cut 4 and stick them together
i have tried to convert it to gsd but no luck (been here before) but if anyone wants to have a go i am sure all those who only use gsd would appreciate it
thanks
Karen
converted to svg by Lucille
I have been working on this for approx 4 months and it's been cut and cut and cut But never been right until Now !!! And now it's finished I can get on with the next one.
I know it's early for Christmas But Thought I would get my celebrations underway :P Quite easy to assemble too.. :wub:
I have cut from perfumed card and only a little decoaration used, comes with a box to display or give as a gift...........
You can see it here And as always thank you for looking,
http://www.ukscrappers.co.uk/photopo...um/snow_22.jpg
Another for the Christmas Season and especially the children...........
With Box template too........ Quite easy to asseble too. Cut from mirri card so a bit blingy Sorry
You can find him here and as always :thanks: for looking :D
http://www.ukscrappers.co.uk/photopo...um/santa_2.jpg
Ready for Christmas? NO nor am I :lol: But I think I'd better start so here's the first template to get you going. Some thing 3d and for everyone especially the children..:D
Cut from red and Black card & red card with the wreath being cut from green mirri card with a small bow and just enough room for your letter to be posted.
You can find it here And as always Thank you for looking....
http://www.ukscrappers.co.uk/photopo...llar_box_2.jpg
One for Christmas........And it won't be long now will it? :lol: Can't beleive it's August already..
Santa's Sleigh with reindeer and carrying A tree and presents... Box included too.. Cut from various card
Anyway you can find it here
http://www.ukscrappers.co.uk/photopo.../sleigh_11.jpg
Started later than everyone (as usual) with my christmas theme but after the lily I thought a poinsettia would be nice for christmas the flowers are fixed into pot on cocktail and skewers
see it HERE
thnxs for looking
Another for Christmas and a unique one at that........... :lol: I have cut from various card 250 gsm, and the box is cut from acetate with mirri card top and bottom, it has fancy edging that goes all the way round and of course Not forgetting your Christmas Sentiment..... The NutCracker stands on his own podium..
Very easy to assemble and takes about 45 mins to complete once cut..
You can see it here and as always Thank you for looking :wub:
http://www.ukscrappers.co.uk/photopo...tcracker_2.jpg
Yes you can use this as a Christmas Cracker or A Wedding Favour... Both look equally as good.. and different as a Wedding favour too.
Try making your own this year... with this template not much work to do :D
I have cut the Christmas one from Mirri card and Jan cut and assembled the Wedding one thank you Jan..
You can see them here and here also they are in the SALE
Thank you for looking as always
http://www.ukscrappers.co.uk/boards/...ictureid=18412
http://www.ukscrappers.co.uk/boards/...ictureid=18413
thought I'd throw in my effort.
Thank you for this challenge Erika, it gave me plenty to think about whilst lying on my sunbed on holiday! There are some great design already, thank you everyone for sharing.
When I was little I used to make these baubles from old greetings cards or shiny foil paper. Here are 2 templates a smaller plain one which could be decorated in many ways - or embossed (cuttlebug snowflakes would look great) and a larger lattice one, not sure this would cut too well any smaller.
To make - you need to cut, score and fold 20 circles. Then stick the 'fins' of 5 circles together (all points meeting) for the top and the same for the bottom. Form the remaining 10 circles into a ring, sticking the 'fins' and use this to join the top and the bottom. This sounds so complicated but it is really very easy.
Sue
Another bauble, assembly the same as previous post. You can cut 9 circles from the first pass of an A4 sheet and then 2 more circles can be cut if the colours of the other 7 are unticked and the carrier sheet inserted from the other end. IYSWIM. 20 circles need to be cut in total
Sue
Well as the title says candles are nto just for christmas - this candle has been designed so it fits over LCD tealight (you won't be able to read by it though :))
and just by accident (not) the candle body fits into your cuttlbug folders to enable you to give the candle sone texture - well would you expect anything less!!!
oh yes and it has a box
here :thanks: for looking xxx
Another for Christmas... This would make a lovely table decoration with one or more grouped together and either smaller or taller..
I have designed in inkscape and cut on craft robo from perfumed and mirri card..I have also added some glamour dust to tacky gluue so it looks as if it's burning..its adorned with Holly too.
Also comes with Box to give as A gift....
You can find it here
http://www.ukscrappers.co.uk/boards/...ictureid=18908
Well this took months to get right and was cut and cut and cut some more:( The card I went through making this was untrue.. Still it's done now and all complete. I have designed in inkscape and cut obviously on my craft robo from perfumed, mirri card and also acetate for the windows. I tryed desperatley to make just from acetate but you could see all the joins and thats not good.
I have uploaded 2 pictures for you one from myself the other cut and assembled by Jan.. Thankyou Jan
You can see it here And as always thank you for Looking..
http://www.ukscrappers.co.uk/photopo...um/globe_3.jpg
http://www.ukscrappers.co.uk/boards/...ictureid=18979
Heres is another of my pop ups this time for Christmas -- once you pop the tree up it folds out to give a 3D effect afraid I didn't put any baubles on mine LOL
Formats available: GSD, WPC, KNK, AI, SVG
Available HERE
Thanks for looking
xx
It's for Christmas! It's Special! :D
And you can only get your genuine Christmas Stocking template at Forevermemoriesforyou.co.uk. Designed in inkscape and cut on craft ROBO machine, My design has been cut and assembled By Jan Connor, She does such an amazing job with all my templates.
This natty little Stocking will be just superb for Children's Cards at Christmas, And you can fill with sweets or whatever you like really. Comes with box template too for display or to give as a gift, the choice is yours
You can get yours here And as always Thank you for looking :D
http://www.ukscrappers.co.uk/photopo...edium/ebay.jpg
Modified from an egg pattern.
Assemble from the center out...largest two pieces first. Add the medium size pieces and then the smallest pieces.
More here:
http://extremecards.blogspot.com/200...-ornament.html
My first post in here, so hope I do it right! :)
I can't believe how quickly this year is going.
A 3D Christmas Tree and Display Box. Designed in Inkscape and cut on the Craft Robo. It cuts beautifully and is very easy to put together.
You can find yours HERE
:thanks: for looking. :)
Another offering for Christmas, The 3D Poinsettia Basket & Box! I have designed in inkscape as I always do and exported for the quicker cut, retraced in robo master and cut on craft robo. I have cut this from golden haze conqueror concept card for the box top and bottoms and the basket. I have used K & Company Red paper which is just beautiful for the poinsettias, and acetate for the main box so you can see into the project.
I am so pleased with this and how it's turned out.. I have worked really hard to make sure it looks so real.. The poinsettias are beautiful and they sit just right in the basket I have designed for them.
How lovely getting this for your Christmas card instead of the normal ones offered for sale in the shops. It could even be your Christmas Table decoration..
You can get yours here and as always Thank You for visiting
http://www.ukscrappers.co.uk/photopo.../medium/19.jpg
Been keeping myself busy to try to keep my mind of everything thats gone on this week, so I've finally got this finished.
Been working on this Christmas Village Scene for what seems like forever and now its perfected. I think its truly magical and would look amazing in anyone's home this Christmas.
Each piece can be purchased individually, although the Post Box and the Street Lamp come as one set or the whole lot can be purchased together for a lower combined price and they all come with inividual box templates.
Only available in GSD format at the moment.
You can find all the details HERE
Thank you for taking the time to have a look. :) x
http://www.ukscrappers.co.uk/photopo...ene_-_Copy.JPG
Well this wasn't what I had in mind really when I designed it but I just love it love it love it!!!
Designed in inkscape and cut on craft robo from assorted card and I think you will agree it's just fitting for the Christmas Table!! Goes just fab with the Napkin Wraps and the place mats already in the store.
Cut and assembled By Anna
You can get yours here as always thank you for your visit!
http://www.ukscrappers.co.uk/photopo...ettia_Cake.jpg
I had already designed a 3d tree back in 2008 which MaryAnne featured on the home page of UKS which I was very proud of.. :D
Since that upload it has been in and out of my uncut files folder more times than I can remember :o Trying to get the peices just right for what vision I had in my mind. I have now finished and it's perfect in everyway!! I have also added small baubles and stars all cutable so you can hang on your very own tree...
Infact This pink one is more like a real tree I can nearly smell the pine needles! it's so authentic... :D
A box will accompany the tree template so you have something to display.
I have cut from conqueror concept pink dew card with golden haze used for the decorations.
You can purchase yours here Available in GSD, SVG for Cricut owners with scal or MTC... AI, WPC and knk formats :D
http://www.ukscrappers.co.uk/photopo...6719/TF563.jpg