Here are a few I did this afternoon.
Hope they come in useful - don't forget to cut one line colour at a time.
Additional search words (baby, brother, mums, dads)
Printable View
Here are a few I did this afternoon.
Hope they come in useful - don't forget to cut one line colour at a time.
Additional search words (baby, brother, mums, dads)
Right I haven't done screen shots of these yet but they are the same as the others just different words. If I get a moment later I will add the screen shots but hope you can use them anyway.
I am having great fun with these so if there is one you want let me know and I will do it .
Image courtesy of kztmiz[/SIZE]
Additional search words (uncle, noel, xmas, daugher)
Inspired by the original thread and lesley and julie i think, ive made this.
I am going to make it for my aunts birthday in january
Following on from Lesleys & Ashleys creations I've had a go at a LOVE one:wub:
Hope you like!
As requested
Additional search words (sons)
At last I have sorted out the problem with it. I have uploaded picture (hopefully).:D
been asked for baby card, here it is, it will fit into a DL envelope.
cut ba, bpage and y page from card, baby toppers from paper to stick over letters.
the template to make these cards.
Additional search words (mums)
Morning all, i first read about this little book in a thread on scrapbooking a while ago, anyway last night i settled down with a craft magazine and found an article on them.
so i decided i would make a template. i think the original ones are about 5inch but this one is 4inch square.
the front and back cover are on one file and the flops bits are in the other.
just put glue on the tabs and stick together.
ive just cut this from plain blue card and used 1 sheet of papermainia 12 x 12 for the mats to cover over the joins.
cut the mats at 10cm squares and then cut some in half for the flop parts i also trimmed these by about 1mm on one side as i wanted a very small border.
anyway i may be of some use to someone.
The three letter pages are all on the one RM page, and are too big for all three to be cut at one time. Just copy and paste the ones you want to cut onto a new page, or change the line colours and cutline settings and shoogle them about a bit on the page. I put mine together with eyelets after making a crease line 1cm or so in from the left hand edges. You could add a fold line to the templates, but I don't like the dotted line effect so did it with an embossing tool.
Edited to add: if you rotate one of the pieces you can cut all three at the same time
Additional search words (Mums)
Same as the Mum mini book (picture in thread and in my gallery), but MOM instead of MUM.The three letter pages are all on the one RM page, and are too big for all three to be cut at one time. Just copy and paste the ones you want to cut onto a new page, or change the line colours and cutline settings and shoogle them about a bit on the page. I put mine together with eyelets after making a crease line 1cm or so in from the left hand edges. You could add a fold line to the templates, but I don't like the dotted line effect so did it with an embossing tool.
Edited to add: if you rotate one of the pieces you can cut all three at the same time
Here's the third option!
I put mine together with eyelets after making a crease line 1cm or so in from the left hand edges. You could add a fold line to the templates, but I don't like the dotted line effect so did it with an embossing tool.
Additional search words (Moms, Mams)
Might be useful to someone - if you know anybody called Pat of course!! :wacko:
Used Pocket full of posies scrabooking paper by DCWV (the slightly glittered stuff), double cut (although I have left the GSD as single cut so that you can make your own choice) with pink blade.
The embellishments are from the C&C pick of the day fairies kit that was on the other week.
Free to use as you wish.
Sally
Additional search words (Patricia, Patrick)
In reply to Amandas request re word books I designed these a while ago and just never got around to posting. I wanted to be able to make word books more easily rather than starting from scratch every time. I hope the instructions make sense. I have attatched pictures of a baby book and "BEN" cards made with the files.
Claire
Additional search words (baby)
sorry very early or very late.
warning take care with the leaf stem the are quite delicate.
Comes as a 15 template file package all zipped
Files consist of the following
THIS CARD CONSISTS OF 15 TEMPLATES TO MAKE THE STORY BOOK
1. POINSETTIAS
2. ANGELS WITH OPEN BOOK
3. CHRISTMAS BAUBLE WITH TWIG FRAME
4. CHRISTMAS TREE WITH CANDLES
5. CHRISTMAS ANGEL
6. CHILDREN WITH STARS
7. CHRISTMAS CROSS
8. CHRISTMAS NATIVITY SCENE
9. 3D EFECTS FOR MOST PAGES
10. ENVELOPE BOX
11 TO 15 VERSES ON PAGES FOR YOU TO CUT AND ADD TO BOOK, To do this you will need to cut the page and use the pen tool for the verse.
Sorry you can find it here
And here are the other photos
Well this was a dream to design and cut and assemble. My greatest THANKS to Dawnuk for the Drawings she drew for me so I could create this card.
Adorned with lattice and something different. Comes as a 12 file download consisting of everything you need Including a box template for that New Baby Card, That no-one else will have.
Sorry I am one picture missing As I am only allowed to upload 5, the missing one will be in gallery.
You can find it here
I will also upload the finished card to my gallery of you would like to leave comments. Just click on my little camera under my name.
thank you for looking
Don't know if anyone can use this. I used it for a wedding card. Shirley
Did this one too... I hope they can be useful to someone. I have cut it and it cuts great.
I sure hope this works.... This is my first time, lol.
Here is my effort for the challenge. It is in the form of a book with a letter on each page. It may well be that another designer has done this before and I apologise if I have doubled up.
The gsd files were made in robomaster and made using straight lines, rectangles and arcs on the 'O'. The peeloffs are actually holographic which don't show up too well in a photograph and I trimmed with pink rosebuds. I used ribbon to hold the pages together. This book will fit a 7 x 5 envelope.
For that "tough-to-buy-for-single-guy" in your family. We have too many of those, lol. It cut well, looks really cute (although its not finished in the pic).
Having made a L.O.V.E book for the December challenge. I thought 'Why limit it to just one four lettered book'. So I have worked all the alphabet letters so that the combinations are endless.
I have zipped all the GSD files together. For those unsure of what to do with a zip, just locate the downloaded zip file and right click and select 'extract files'.
I have added a 5x7 boxelope which will fit the wordbook. It is elsewhere in the templates but I thought I would put it here for you.
Something else to share I had to make one for my youngest Daughter so here it is.
Font is called MADFONT and is free
I created this ages ago and it cuts out nice so decided to share. Sorry if there has been similar posted but hopefully someone will get use out of this. This is my own creation drew it and converted for robomaster. There is a castle card a castle book inset and some frames to fit in if making a small scapbook out of the castle book
Know someone was looking for something for 100th but they may be sorted but I thought I would put this up in case someone can use.
This may come in handy for anyone who wants to make something special for a golfer. Golf Word Book
Just finished this for my Daughter to give to her friend for her birthday. It may be useful for someone. :)
Font - AnAkronism.
I've done this for my Daughter who is receiving her GCSE results on Thursday. I wanted something that represented her school days (a book) and marking the end of regular school and something which I could put a reward (money) into for achieving whatever grades she gets as I know she will have done the very best she can. I have printed a verse onto vellum and rolled it up and popped it inside, the verse tells her how proud I am of her and starts with her first day at school and goes beyond to the career she is aiming for. :wub:
This could be used for any occasion and a small gift could be put inside. Hope it may be of use to someone. :)
The font is Amaze.
Well I thought it was about time I made another contribution here as I've downloaded some fantastic designs myself from you very talented ladies and gents. This was originally created in Coreldraw12 and I've had to convert to .dxf then .gsd
The problem being is the correct sizing of all the elements, no "rulers" and no "select all" in Robomaster makes it very tricky! When originally designed in CD12 I had it the perfect size to fit into a normal long envelope, another problem was that the little holes for the ribbon wouldn't convert over so I had to guess with these in RM and I'm not sure they'll be correctly lined up (once again no rulers! What is that all about? How do you get things spot on with that program?)
Anyway, it may need some tweaking in RM but I hope some of you can use it. Anyone who wants the CD12 file just let me know and I'll e-mail it to you.
Hope you like it
Hels :wub:
Hels
Hope this book is useful to someone. xxx
Sorry there is no picture of this book as yet. Put only learnt how to make them in the last 2 hours. Informations given by Lucille thanks again. It looks like i could have loads of fun with this.
Thanks
Hannah
xxx
font is WINDZ
Here is my second word book with Photos, I hope you like.
Font: Windz
Hannah
xxx
I designed this in inkscape and I have to confess I didn't cut and assemble :lol: My lovely lady Jan Connor did it for me as I just didn't have time and it's been wating to be cut for a couple of days now.. But as usual Jan came to my rescue and what a lovely job she has done too..
Hope you can use ;)
I made this by request for a lady who needs something for June..
Hope some of you can use too :D Sorry not made up just didnt have time.. if you would like the svg version you can download from my blogg..
Here is a name book, ALANA, and if you didn't use the last A then it would be an Alan name book:P
The font used is CHICK from Dafont I think, you won't need it installed to see the font, I have included the letter toppers, but there is only 1 A, you just have to cut the A 3 times.
Designed this sometime ago and just didn't get it finished..
Hope someone can use :P
As you may have gathered by now, I love doing name books.
The font is Forte, another favourite
This is a small name book, but you could resize it, I wanted to keep is small to put on the bottom of my 60 card ( photo is in my gallery)
font is Forte
I know this is a bit late for this Christmas, but then, that is the story of my life, I am always leaving things to the last minute.:lol:
So the font is Almonte Snow, but you won't need it, as I have welded every letter just for that purpose. Free font from DaFont.
(TIP)By welding a single letter, even if it doesn't change it visually, it changes it so that the font is not required to be installed or even open, when using this file.
For the snow effect I used Graphtecs glitter paper, if there are more than one piece of snow to a letter, then it is grouped together before grouping it to the letter. (for ease of use when cutting).
Also the snow flakes which are also welded, are WWFlakes also from DaFont.
The snow flakes in the photo are slightly different from the GSD file, as I was working merrily^_^ making this word book, and when I just had cut the last page with the Y and snowflakes the b****y RM crashed, my pointer was literately on its way up to File>Save as........when I got the lovely (not):angry: message saying there was a problem and RM would have to close.
I had saved it all, but at the last minute I decided to change the last page and put snowflakes where there was no letter, hence that bit wasn't saved, neither was the other pages with my workings,, so when I cut another one I will change the photo, AND hopefully it will be a better photo:lol::lol::lol:
I hope you like it and thanks for looking:thanks: