This is based on a free clipart that came in a magazine last Christmas. Part traced and part free-drawn. If it isn't acceptable to share my version please let me know.
Printable View
This is based on a free clipart that came in a magazine last Christmas. Part traced and part free-drawn. If it isn't acceptable to share my version please let me know.
Looks nice when cut!!
has been posted before but maybe it was on a chat thread
Susibi
here iis another one - templates without a thumbnail
http://www.ukscrappers.co.uk/boards/...light=Scribble
Thought I would try and get ahead!
Jane
PS This file was created using CR Pro, you will need to put it through the Wishaway program to cut it using CR.
Have been having a bit of a play around and made this Christmas Tree.
Hope it is of use to someone.
I put several on a page, then used spray adhesive to attatch them to the fronts of cards, that have the 3D Merry Christmas popup, on this forum, on the inside.
I am no longer a Robo Template Virgin!
here is a very simple PP christmas tree, hope someone can use it!
jo
ps - and i even got the photo and file on ok! Yay me!
Another couple of converted dingbats:)
(I'm on a roll tonight!!)
Have re-uploaded these so hopefully they will work even if you don't have the font.
Yet Another Christmas Tree!
Hope you like it.:D
sent me a PM if you want the inkscape source file.
I have cut 45 of these for pre-school a few weeks ago they cut very quickly and without any problems. We are going to let the children decorate them then make them up and give them as Christmas cards to their family so I have left them plane but you could cut out stars baubles etc.
hope someone else can us them
tried and tested
A christmas tree made of circles, stars and snowflakes.
Here is a Christmas tree for you. Hope this works for you.
Hiya :) hope someone will make some use from this
love n stuff
Frances
xxx
Hope you dont mind me sharing my designs.
For all those who are getting ready for christmas.
It's a simple design, but effective.
:thanks:
Hi
Hope this is ok and can be of use to some. :)
came up with this while tying to get the hang of swirls hope its ok
tried to do a conversion to GSD and no luck dont remember what buttons i pressed when making this and cant get it to 'show fill' making a conversion more difficult
it cuts ok in DM though
Karen
converted to GSD by Wishful Thinking
Okay, I know it's not even June yet, but as I make around 150 Crimble cards every year I have to start thinking about it early!:lol::lol:
Hugs
Jan x
I loved Jan's snowflake tree so much I thought I'd have a bash at one myself! The snowflake is very simply created in DM using the arrow, rectangle and circle tools - it makes quite an effective mat and cuts well. It's a bit hot for all this christmassy stuff, but it may come in handy for future use (I hope)
Sylvia x
I hope it's not too early to mention the 'C' word. Here are a couple of Christmas trees.
Cuts fine...may be helpful if anyone still has cards to make
OK one last polygon design! A simple Xmas tree this time - it cuts surprisingly well, but care needed in lifting from the carrier sheet.
Similar to the snowballs - this time a christmas tree. The zig zag lines were off set to give an even spacing then circles added and the whole welded. Cut out of holographic vinyl then stuck onto mirri card which is why the design doesn't show up too clearly.
Two different Christmas trees with mats
Hi everyone. This is my very first attempt so I hope it fulfils the November criteria! :unsure: The tree and top large flake are welded into one piece. The little flakes are seperate for cutting in another colour. I've added the 'master' flakes in case anyone wants to add more etc. I hope it is of use
LoL Ann xxxx:)
Here is my first attempt at making a GSD file of a Christmas tree
Hope you like my creation
comments are welcome
Don't know if anyone has started their Chrismas cards yet:lol: but here's a topper if anyone can use. It cuts fine.
I've added a GSD
I don't think there's a Christmas tree template like this one, but I made this a moment ago for a friend.
Here is another file
I made in my PSP
ENJOY
BC FRANNIE
Hope you like this shape I cut this out on the Cameo using A3 card and setting 5