I am on a roll, If you are lucky I might get another few done before I have to back to work next week.
Lynn
Printable View
I am on a roll, If you are lucky I might get another few done before I have to back to work next week.
Lynn
Here is a file i have finished this morning! I woke up at 3.30 and couldn't get back to sleep, so have been making use of the time tidying up some files i started last week.
Hope you find it useful....
I haven't cut this amended version but should cut ok as the tests one was ok just needed tidying... sons on nights this week !!!
so i cant print or cut until this afternoon, pity hubby and son cant both work nights at the same time, i'd get so much more crafting done !!!
Here is another!!:rolleyes:
Lynn
Picture by elaineburnett
Made it as 5inch square and A5.
Made from a piccy I downloaded about 6 months ago, I think it was a font.
Cut on blue robo, speed 5, thickness 30. Mine is set like that as I use accucut blade holder and the thin blade.
Lynn
This card was inspired by RachelB and her borders, This fits the 8and half inch by 3 envy I posted a while back.
Lynn
The card has the stars cut out of it. also the slots to threat the ribbon (or in this case silver paper) through are cut out. The little stars are put back on the card with popup dots
a little scallop on the edge.
I've folded it. (the paper is dubbel sided, and jused dubblesided tape to stick it together.
a loose insert is put in the enveloppe.
the pictures are of the enveloppe alone, and the enveloppe with card in it.
hope you can juse it.
(Hope my spelling is ok?!?!?!)
I made the strips to be embellishments and they cut beautifully. Then I thought that they might look good on the edge of the card so I set to and made the card file as well.
Ruthan x
This robo wotsit is addictive isn't it?
Here is another set of embellishment strips and an edged card with the same diamond-ish design. This time I cut the strips from card preprinted with my Pastel004 background but it could look effective with any print.
Ruthan x
Hope someone can make use of this, as my Robo is refusing to cut it properly. Hugs Iris xx PS should have added that others have tried the template from the chat room and it cut fine for them.
I am so grateful for access to everyone's templates, as a small token of thanks I have added images.
Sue x
This card takes two cutes,so you have to go into the cutline settings. I used heavy cardstock that was a speciality 12" x 12" paper. I don't like waste, so I cut the paper in half, therefore the document setting are set for 6" x 12". Make sure you change it if you want a different size. The inside liner is a light weight 24 lb. Here the paper weight is used for official business letters. I bump up the thickness to 13. I was too excited to wait for the disappearing glue to disappear before taking picture. So don't look to close.:rolleyes:
Font is Artisan. Sorry I did not weld the letters. That's the way it look without alterations.
Thought this may be useful to someone. Cuts fine.:wacko:
Hi Lucille
Tried to upload the template, not sure if it will work.
I think I'm a long way off writing tutorials just yet!! :lol:
Hi
I have just done the challenge, I have used the octagon in DM (never used this program before) and moved it so it looked like a flower, cut out as TUT iinstructed, then resized flower larger and smaller to add layered effect. Then I made and even larger flower and curved the petals to add shape and layer that. Added gems for sparkle, shaped the corners with my corner scissors and then edged the card in pink.
I do not know how to add pictures to my camera so I have tried to add attachments
GSD conversion by 2magpies
What a great idea....newbie challanges. I have really enjoyed having a go at this and here is my result. This is using the Craftrobo next time I will try out the Inkscape tut. Thanks so much.
The only thing I didn't manage to do is to get a box around all three spades when I held down the CTRL button and click on each spade. So I just selected all three and went on with the tut from there.
Oops, meant to say that I have put the black spades on the front of my card as my robo blade is not liking cutting through card at the moment so had to use paper.
this is a template I made earlier in the year, hope someone can find a use for it, I have used conqueror golden haze card and cuttlebug embossing flowers
appear to be having one of those moments lol
Thanks for this challenge, Robbie has been sitting very quietly recently as I have been trying to study but have given in tonight and followed the DM instructions and this is what I have acheived and I have learnt loads, so thank you very much and I eagerly look forward to next months challenge - fab idea.
Sorry still havent worked out how to convert to gsd.
Ok sorry my brain really is not functioning at the moment as I also wanted to say well done to everyone who has completed the challenge and thanks too for sharing your files. Right I'm done now! (I think!!)
hi i have done the May Challenge this is my first. i used RM :wub:
I have finally managed to do the challenge.
It is the first one that i have tried. I found the tutorial very helpful as long as i did everything in order. Thank you for all your work. Hope i have uploaded my template properly as it is the first i have done. Not cut it out yet will do so later.
Cut out pansy, backed by photo, with pansy edging made from same photo.
Here is my attempt. I used the Inkscape tutorial and found it very easy to follow. I would like to try the same thing in DM next as the tut looks very clear. Thanks for the challenge, it is such a good way to try something new. Love everyone elses cards by the way, such a variety of good ideas.
This is quite basic but my first attempt so hope someone can make use of it. The circles are actually cut out but put red card behind so that holes showed up. Can someone tell me how to upload a screen shot?
Well keeping with this months Theme of Swirls I have made this one which is for sale
You can find it here
thanks for looking
I made this as a Birthday card but I think it would be suitable for other occasions.
You can find it here.
haven't been able to use robo for some time because my last computer died.
I now have a new one and can start creating again, this is my first design on it so I thought I'd share it with you.
Well that's what my OH called it !!
You can find it here.
Shirley
Well this was quite easy to make I saw something similar on the net and thought yes I can do that so here it is................. Flowered Edge to both sides of the card.
And I have always been a pink cap girl :lol: BUT I used the yellow cap for this one and it cut on one cut straight through 200gsm card. my robo's amazing:lol:
Hope you like it
It's not Christmas Sorry I have had enough this year of Christmas templates :lol:
can be used for ladies cards really I think not a mans card .
Hope you can use
To bring a touch of Spring ( it's snowing here in Sheffield at the moment !!)
You can find it here.
Shirley
Well while I have been trying to come up with some fancy edge cards I came about some unexpected results lol.
I hope someone will be able to use. Template leaves loads of room for decoration or for decoupage. Sorry picture is not great.
Jo
These were made in Inkscape then imported into V5.1 of Robomaster. They can be used either way up
Forgot to say I haven't added the fold line as I prefer to do mine with a scoring tool
Maybe someone will find a use for this, not sure what occasion
Another Funtime creation. Last one for now must get some dinner on
Fancy top edge card
From looking at all the fancy edge templates that have appeared over the last week it seems I'm not the only one that loves them at the moment lol.
Well heres another one that I have designed in illustrator while fiddling.
Templates all in seperate parts which allows you to cut the swirls as either matts or cut outs and to allow you to cut the design begore the outline incase your carriers loosing some of its sticking power.
Hope its of some use.
Jo
Right - I think I've done one. Lucille, Doreen, please tell me if this is what you've both been doing or have I totally missed the point, lol. :)
Sorry Not cut But I presume it will be ok :love:
Not done with the tutorial :lol::lol:(Lucille & Doreen)
Fancy edge 11
Well this ones been done using the same design that I drew for my fancy edge 9 card.
As before I drew in illustrator before bringing into rm.
If you prefer to do your fold line by hand just turn off the red cutline so that it doesn't cut.
hope you like and can use it
I have just added a photo of basic finished card. I have also updated file as when I the matt/overlay it was too delicate
jo
Here's another go at the tut. :)
Made in 4.4 - Sorry not cut yet so no idea if it will work.
And another - Sorry Tina!!
Made in 4.4. - Sorry not cut yet, so no idea if it'll work. :)
I'm not sure about this one
May be useful if you like squirrels, perhaps little gems for the eyes