One for the Birthdays, Had a lovely Present inside with a Beautiful Ribbon Bow.
Cut from Perfumed Card, Doesn't need much Decoration, I have used Swiss Dots embossing folder on the Present.
You can Find it here
Thank you For Looking
Printable View
One for the Birthdays, Had a lovely Present inside with a Beautiful Ribbon Bow.
Cut from Perfumed Card, Doesn't need much Decoration, I have used Swiss Dots embossing folder on the Present.
You can Find it here
Thank you For Looking
I'm Back again.
The Font is called Floral stencil design and can be found on houseoflime.com font website, select DINGS and then you can select the font from the long list.
The lettering Font is called Freefrm721 which I believe is a standard font on your PC.:comp::comp::):D:):D:comp:
Hi Lucille can you move this file to the April challenge.
Hope someone can use.
Sorry can't share the lace or the decoupage due to copyright. :)
I have also backed the aperture with another small piece of card and embossed with swiss dots embossing folder. :D
Just practising ... hope this is useful to somebody The font is WallowHmk
:love:Sharon:love:
I was sure I had uploaded this but a quick look round the temp files I could not fine I sorry Lucille if it is in the files. Please feel free to delete it
Well it's not really round but I was stuck for a better description !!
You can find it here.
Thanks for looking
Shirley
Another swirly card - I think I'm in a bit of a rut !!
You can find it here.
Shirley
For the last few mornings we have been woken at the crack of dawn by a bumble bee buzzing away outside our (open) bedroom window. For a little fella he can't half make a noise - no alarm clock needed !! Anyway he inspired me to make this card. You can see it here.
Shirley
Something that can be used for most ocassions I think with this one especially Birthdays................
Sorry forgot to add it will cut as a a5 size card then you add the layer's
Personal use only please:D
This one is for my niece's birthday next week, hope someone else can get some use from it too......
:love: Sharon :love:
A mutli-fold type card with birthday greeting.
You can it here.
Thanks for looking
Shirley
This my variation of the Spring Card by Lucille. The fonts I used are Hobbit, DavysOtherDingbats and Dogs vs Cats LT. I need to edit this file but cannot do so until tomorrow. There are some stray bits that need a clean up. (Thanks Lucille)
An easel card decorated with lattice - think I'm getting addicted to these !!
You can see it here
Shirley
This was based on the wedding delight card I also designed.
Here I have added a silhouette lady and overlayed her skirt with beautiful lattice, The silhouette is also featured within the archway,
and a big bow to finish it off..
Designed in inkscape and exported as a bitmap and retraced in robo master which I find cuts quicker and cleaner..
You can see it here And as always Thank you for taking the time to look!!
This was a customer request... Something different than flowers So here it is!! I have uploaded two versions One from the customer who ordered and one from Yana.. Both are just beautiful, and you can see the work gone into their cutting and assembling.. so thank you Girls.
You can see it here And as always :thanks: for looking
http://www.ukscrappers.co.uk/photopo...ne_dance_2.jpg
http://www.ukscrappers.co.uk/photopo...ine_dance3.jpg
http://www.ukscrappers.co.uk/photopo...Line_dance.jpg
Well this is something different for Birthdays a combination of Horse's and spring mixed.
This has been cut and assembled by a new design team member Nicola who has only owned a Robo for Just a couple of months so to tackle one of my designs I hope you will agree she has done an amazing job.
You can get your's here and as always Thank you for looking...;)
Available as gsd and svg
http://www.ukscrappers.co.uk/boards/...ictureid=21532
http://www.ukscrappers.co.uk/boards/...ictureid=21533
Just stunning this Door card, Designed in Inkscape and exported then retraced in robomaster as I tend to find it cuts quicker..
The flowers are all separate elements so they look as the forget-me-not should look..They are all Numbered in the template and advising you of what colour to cut from..
Cut and assembled By Jan.. Thank you Jan another beautiful Job...
You can purchase your's here. Available in GSD..SVG...AI...KNK..WPC
And as always thank you for taking the time to look...
http://www.ukscrappers.co.uk/photopo...m/S8002072.JPG
Janine (nuttymum) has asked if I would share this template which I am glad to do - sorry it has taken so long Janine! I have had to split it into 2 files as there are quite a few bits and pieces. I haven't cut the GSD file and I dread to think how long it would take to cut, but the GRA file cuts well.
This was very much a labour of love and took me a long time to do, but I was pleased with the end result. I did it for my daughter's birthday and once she had worked out how to stand it up she loved it. I had to reinforce the back of the easel because of the weight of the mat.
Good luck with this Janine!
Another card in the Art Deco theme - this one features a sitting silhouette.
You can see it here. Available in gsd, svg and ai formats
Shirley
I finally managed it.:rolleyes: Here is my first template. Thanks to inspiration from Cottons1. Thanks Sue, hope you don't mind that I used your design etc.
The font is Porky's. Please feel free to use.
I designed it in Inkscape and not sure how to change into GSD.
I will also attach photo when I have one ready.
I have created this using a Floral dingbat font. It cuts well and I hope may be of use to someone on the front of a birthday card.
Lucille thank you so much for this challenge. It forced me to try out the Studio program. I am very impressed..... Now if I can figure out how to cut it I'll be doing good. I'm off to look for a tutorial.
This is a variation on Doreen's different popup (thank you for a lovely idea Doreen!) I've placed the circle lower than Doreen's so that it will fit more easily into a standard size envelope. I've used satin ribbon in the ribbon slots and beads in the circles - it makes quite a nice card.
something quick and easy only needs bit of decoration.
Feast your eyes on this beauty!!!!!!!!!! I love it! it's stunning and very unusually unique.. Designed in inkscape and cut on Cameo for me by Marion and what a lovely job she has done..
You can get it here Available in GSD...STUDIO..SVG file formats...
As always Thank you for your visit.
http://www.ukscrappers.co.uk/photopo.../6719/cup1.jpg
One for Birthdays here with the Oriental Theme.... I personally think this is just beautiful once assembled and could be used for many occasions should you remove the sentiments or add your own to it.
Add battery tealight between the backs of the card and watch it light up !
Thanks goes to Marion for her assembling of the design.
Designed in inkscape so available in
GSD...SVG...STUDIO HERE
http://www.ukscrappers.co.uk/photopo.../6719/0098.jpg
http://www.ukscrappers.co.uk/photopo.../6719/0025.jpg
This is a simple card suitable for all, especially for those men in our lives (that I find hard to make cards for). I cut the different letters out in a variety of colours but feel free to do whatever you like with it.
(I have been asked what font this uses but I really dont know (sorry) as I made the image using photo tweaking software to which was saved as a jpg file and then used the get outline tool in robomaster. If you cant get the gsd to work please see the jpg file that I have uploaded, see my reply below.)
Sharon
My nephew has a birthday coming up next month so I thought he'd like this reminder of how time is flying!! The font is Georgia but it has been welded so should be OK. I've used gold and silver mirri paper to back the clock face. I cut the clock on white card and coloured it black with a promarker - saves trying to cut that nasty fibrous black card that our cutters hate so much!
Designed for customer request.... Now in the store.....
You can find it here GSD...STUDIO...SVG
As always Thank you for your visit... Discounts still running through all templates.
http://www.ukscrappers.co.uk/photopo...6719/00617.jpg
Another basic one from me..
You have to get the balance right between thick enough card for it to stand and not too thick for the words are a bit delicate, photo will follow, I have cut out 2 a few hours ago, but to tired to take a pic, I'll do that in the morning.
Thank you very much for this challenge Liz, some great files have been produced, I wonder if this will be the last one :lol:
Sorry the photo is so poor
I've been working on this one for one of my sisters who has a birthday at the end of March. It's loosely based on the broderie gatefold. I've cut this with my old robo blade, although I used a double cut I did get a nice clean cut.
Another broderie birthday for you! I've used conqueror concept 250 gsm card for this one, finished off with ribbon and beads.
My daughter has one of those "special" birthdays coming up next month and I have designed this card for the occasion. I have used some elements from the font Beautiful Ornaments for the cutwork on the main card. Because there is a lot of cutwork it makes the card a little unstable so in order to strengthen it I have cut the front part again and glued it on the inside. You will see I have included this on the template, and it could be used as a topper. Although the card is for 40 it would be very easy to remove the centre and put whatever number you like in there, or even text. Decorated with my favourite ribbon and beads!! The organza ribbon was a sort of cream colour, but I have coloured with a pink pro marker pen to match the 40 and it has worked well, I think.
For this text effect which I designed in Inkscape, I cut away the parts of each letter that overlap so that the gap completes each letter (iyswim). It was hard to photograph, and looks much more effective in real life, but I hope the detail photo shows what I mean.
I've used it for this nice and simple blokey card topper, but it might work well on a LO title too. :unsure:
GSD, Studio and SVG files are in the zip folder.
.
Edited to add a 'how to' image. With thanks to Rosemary for finding such an easy way to achieve this effect in Studio. :thanks:
.
I found this one really difficult to design - it is for one of my sisters who is sadly very ill. I did not want to put the word "happy" anywhere as it would not be appropriate so ended up with birthday wishes. I've probably gone overboard with the beading but I don't care. I've put a simple insert in it with the words "Thinking of you on your birthday"
Sorry just a screenshot, camera is charging
Another from the overlapper door collection. This one feature the octagon shape... loads of beauty in this one..
You can find it here in all formats
As always Thank you for your visit..:)
http://www.ukscrappers.co.uk/photopo.../Hexagon_1.jpg
I have designed this for my youngest niece's birthday in August - nice and flat for posting! The central mat will require very careful lifting from the carrier sheet.
Inspired by Yorkiemums Christmas card (wich I loved - well done) I have made one similar for Hapy Birthday - It cuts well I used CutOutsFLF font - Hope you like it
Helen