Donate with PayPal to help keep UKS online!



Go Back   UKScrappers > Forum > Special Forums > Cutting Machines - chat, help. templates > Cutting Machine Chat

Notices


Page 1 of 3 123 LastLast
Results 1 to 15 of 31
  1. #1
    Hooked on Pop-up Cards ErikaP's Avatar
    Join Date
    Jul 2006
    Location
    Callian France
    Posts
    1,327
    View Gallery

    Trader Rating: (2)

    Inkscape tips and tricks.

    Ok,

    There are now loads of people using Inkscape. We all know the instructions don't tell you a lot, and most of what we learn is by accident.

    I have discovered a few little shortcuts whilst playing with it, so maybe others have too. How about everyone sharing their tips and tricks, so we can all become experts.

    Here's mine.

    If you want to see the nodes, double click the selected item, it will display them.

    To add an additional node, when viewing the nodes, double click where you want it to go.

    Selecting a text letter and pressing Ctrl L will convert it to a path and simplify it simultaneously.

    If you have a scroll mouse, press Ctrl and move the wheel to make the zoom in or out. Press shift and move the wheel to move the screen left and right.

    Don't bother with cut and paste. Just hit Ctrl D for an instant copy.

    This is all I can think of for now.
    I look forward to any other tips and tricks.

    Erika

  2. #2
    Owner of Janome MC9900 & Brother ScanNCut
    Join Date
    May 2005
    Location
    Derbyshire
    Posts
    7,273
    View Gallery

    Trader Rating: (1)
    I press f2 to see all the nodes.

    didnt know about ctrl L, if i can remeber i will try that out

  3. #3
    Dedicated Scrapper
    Join Date
    Nov 2005
    Location
    Ascoli Piceno, Italy
    Posts
    2,258
    View Gallery

    Trader Rating: (1)
    Thanks Erika - great stuff didn't know the Ctrl L either - living and learning!!!
    I always use Ctrl D as it places the copy directly on the top of your working copy - so best for making mats. Great for making frames too - Ctrl D then Ctrl shift ) hit ) repeatedly and you get a frame as wide as you want. Select all Path>Exclusion and your two frames or shapes become 1.

    Susibi

    Here are some more bits copied from previous posts :

    Hint: the simplest way to 'select all' is to position your mouse in the top left hand corner of your page then- while holding the left mouse button depressed- drag your mouse towards the bottom right hand corner of the page. This will make sure all the elements you need to include are selected.


    Simple Christmas tree frames :

    Inkscape - new page A4 landscape
    Click on stars/shapes tool change number of sides to 3
    Draw triangle - cut and paste two more triangles
    Arrange and resize them to form a tree shape
    Draw a small rectangle to form the base and add to the tree
    Select all Path>Union tree shape with trunk!
    Ctrl D select then Path>Outset as many times as you wish
    You have 2 tree shapes
    Select all Path>exclusion - tree frame
    Make a star frame
    Resize and put on top of tree - Select all Path>Union
    save as -dxf
    Load to Cr and change colour to black Edit>Group


    How to do curved text on a shape ( top word convex bottom word concave):

    1.Open Inkscape New page - A4 landscape

    2. View >Display Mode>Outline ( this tells your prog how you want to see your finished word - nothing will happen yet!)
    Choose any script type font ( I used Freehand size 120 ) using T icon on top bar

    3. Draw circle ( or ellipse) - make it a decent size for the word you are making and the font size you are using. If you make your shape too small your word will be squashed!! Practice makes perfect!
    4. Write your word

    5. Select the word and pull it over your shape

    6. Select all Text>Put text on path your word will curve to your shape

    7. double click on your word to bring up the direction arrows and drag your word so it's at the top of your shape
    Select the word Path >Object to path

    8. Delete your shape

    9. Select all your word - you will see the letters are no longer joined

    10. Path>break apart
    You have separate editable letters:
    A word of warning...for letters that have a 'centre' that is not attached to the outline Ps Ds As Bs etc : when you 'break apart' these centres will float as they are not attached to your letter outline so when you go to weld your word they will disappear.

    11.Now highlight and move each letter slightly until they are all touching make sure you move the centres as well.
    Select all your word then - while holding down Shift- left click over all the centres of the letters to unhighlight them other wise they'll disappear when you weld - unhighlighting them means they don't obey the 'Union' command.

    12. Select all Path>Union - you have a curved welded script word - with your centres intact but still floating

    13.Select your word Object>Group

    For the bottom word:
    repeat steps 4 5 6 and 7
    then:

    8. Highlight word Object>flip vertically your word is curved inside your circle

    9. Select the word Path >Object to path

    10. delete your shape

    follow steps 9 to 13

    Save your file as a .dxf



    Monograms in Inkscape try this:
    So excited - thanks to Sandy Macauley who posted on Paperthreads I've learnt a new trick and the results are fantastic - easy peasy etc etc.I've combined her tricks with some of mine and I'm sharing with her permission:
    With this method your work is all done in Inkscape so all you have to do in CR is change the line colour and group.

    Open new page A4 landscape
    View>Display Mode>Outline
    Draw circle ( could be any shape we'll use a circle)
    Ctrl D ( duplicate shape)
    Select Path>Outset as many times as necessary to give a frame like shape
    Select all Path>Exclusion ( and your two shapes become a single frame)
    Type a letter, resize and place it over the frame so it touches the frame in various points
    select letter Path>Object to path
    Select all Path>Union
    Finished!!
    Save as .dxf and load into CR.
    Last edited by susibi; 21-11-2006 at 12:21 PM.

  4. #4
    Owner of Janome MC9900 & Brother ScanNCut
    Join Date
    May 2005
    Location
    Derbyshire
    Posts
    7,273
    View Gallery

    Trader Rating: (1)
    ive made another template today using that exclusion technique, so easy ive posted my card in my photos on here, it looks abit plain not sure if it needs something else, but in real life looks ok so will probably leave it alone, made another one on patterned background card will post that tomoorrow.

  5. #5
    Too mad to care! craft_queenie's Avatar
    Join Date
    Jul 2006
    Location
    Somerset
    Posts
    61
    View Gallery

    Trader Rating: (0)
    The CTRL L was the only thing that made sense from the tutorial for me. Really enjoyed using the monogram tutorial from Susibi today - really easy to do and SO effective!!!

  6. #6
    Hooked on Pop-up Cards ErikaP's Avatar
    Join Date
    Jul 2006
    Location
    Callian France
    Posts
    1,327
    View Gallery

    Trader Rating: (2)
    Thanks Susibi, didn't realise you could choose the points on a star, missed that one. Very useful for other shapes.

    Erika

  7. #7
    Too mad to care! craft_queenie's Avatar
    Join Date
    Jul 2006
    Location
    Somerset
    Posts
    61
    View Gallery

    Trader Rating: (0)
    When doing welded words with curved script... if your script has 'break away' bits like the centres of the tails on the attachment (the 'floating' bits from Susibi's tutorial before welding (while in the 'break away' part of the process)).

    Combine them with the rest of the letter by moving the larger part of the letter away, select the small piece, then CTRL Z to undo the move. The smaller piece will be selected so Shift and click on the main part of the letter to select that as well then CTRL K to combine the two. You can then move the two (or more!) pieces together.
    Attached Images Attached Images
    Last edited by craft_queenie; 14-10-2006 at 02:36 PM.

  8. #8
    Hooked on Pop-up Cards ErikaP's Avatar
    Join Date
    Jul 2006
    Location
    Callian France
    Posts
    1,327
    View Gallery

    Trader Rating: (2)
    Discovered a few keyboard shortcuts today by accident.

    Alt [ or] rotates the selected item by degree.

    Ctrl [ or ] flips the selected item by 90 degrees

    Alt < or > increases the size of the selected item by a small increment.

    Ctrl < or > increases the size by 100%.

    Hope these are useful.

  9. #9
    Dedicated Scrapper
    Join Date
    Nov 2005
    Location
    Ascoli Piceno, Italy
    Posts
    2,258
    View Gallery

    Trader Rating: (1)
    Wicked ... as they say!!|
    Susibi

  10. #10
    Diehard UKScrapper sandymcc's Avatar
    Join Date
    Nov 2005
    Location
    Tempe, Arizona
    Posts
    656
    View Gallery

    Trader Rating: (0)
    Quote Originally Posted by ErikaP
    Discovered a few keyboard shortcuts today by accident.

    Alt [ or] rotates the selected item by degree.

    Ctrl [ or ] flips the selected item by 90 degrees

    Alt < or > increases the size of the selected item by a small increment.

    Ctrl < or > increases the size by 100%.

    Hope these are useful.

    These are GREAT, Erika! I am so impressed with all the tips and tricks you've come up with! Thanks for sharing and I hope you guys have received copies of my own Inkscape class tutorials. Although now I feel a need to go revise them a bit to include some of this new information.

    Sandy

  11. #11
    Dedicated Scrapper
    Join Date
    Nov 2005
    Location
    Ascoli Piceno, Italy
    Posts
    2,258
    View Gallery

    Trader Rating: (1)
    These tips and tricks are a sort of hotch potch of what has been previously published on here by Michelle Hessler, Sandy McCauley, Susibi, Stressed and Erika to name but a few - abridged and edited !! as we progressed we've found that some steps which seemed necessary from a graphics point of view weren't necessary for the final result so why do them!



    Simple welded word in Inkscape:

    1)Open Inkscape
    2)new page - landscape A4
    3)View>Display Mode>Outline

    Choose any NON SCRIPT font

    Type your word
    To join your letters : Click between each letter then using Alt and left arrow
    move your letters until they touch
    OR.
    Type each letter separately then using your cursor join them together
    Select your word ( best way to select is to hold down your left mouse button and drag a box around your word or image)
    Path>Object to path
    Path>Union
    You have a welded word

    To make a mat:
    select your word then Ctrl D and CtrlShift ) again as many
    times as you need to make your mat


    Word art in Inkscape:

    First three steps as above
    Choose font ( any font)
    Type each letter separately
    Using your cursor move and/or rotate the letters until they all touch each other
    Select your word
    Path> Union
    You have a welded word

    To make a mat:
    select your word then Ctrl D and CtrlShift ) again as many
    times as you need to make your mat


    Simple script:

    First three steps as above
    Choose a script font
    ( eg English Script)
    Write your word
    to join those letters that aren't joined up click between them and do Alt and left arrow
    Select word
    Ctrl Shift )
    ( ie hit your Ctrl key Shift key and bracket key together)
    you have welded script.

    To make a mat:
    select your word then Ctrl D and CtrlShift ) again as many
    times as you need to make your mat


    To make 'words on an edge'
    ( greatly simplified)

    Steps 1 to 3 as above
    Draw a shape
    Type your letters separately on the page
    Move them until they are over the edge of the shape
    Select all
    Path>Union
    Done

    To make words in a box:

    Steps 1to 3 as above
    Make a welded word and move to one side

    Make a frame:

    Draw a shape
    Select
    Ctrl D
    Ctrl +Shift+ ) ( hold down Ctrl and Shift and hit bracket key as many times as you need to make your frame)
    Select all
    Path>Exclusion - you have a welded frame
    Place your welded word over your frame
    Adjust size and position
    Select all
    Path>Union


    Remember : When your word is welded it is considered as an object so to weld two images or words together select all then Path>Union

    By using Ctrl +Shift+ ) to weld a script word you are using the Path>Outset command and your word may result a little 'fatter' than you want. To make it thinner once it is welded simply hit the ( key

    these are the instructions for Inkscape they all finish with:
    Save as .dxf
    Load into CR ( File>Load dxf)
    Select all change line clour to black
    Group each individual image

    Susibi
    Last edited by susibi; 16-10-2006 at 11:25 AM.

  12. #12
    Hooked on Pop-up Cards ErikaP's Avatar
    Join Date
    Jul 2006
    Location
    Callian France
    Posts
    1,327
    View Gallery

    Trader Rating: (2)
    Well done Susi, that's worth printing!

    Erika

  13. #13
    Dedicated Scrapper sugar n spice's Avatar
    Join Date
    Dec 2005
    Location
    cheshire
    Posts
    1,445
    View Gallery

    Trader Rating: (5)
    Quote Originally Posted by sandymcc
    These are GREAT, Erika! I am so impressed with all the tips and tricks you've come up with! Thanks for sharing and I hope you guys have received copies of my own Inkscape class tutorials. Although now I feel a need to go revise them a bit to include some of this new information.

    Sandy
    what tutorial? where can I find it please?
    sugar xxx

  14. #14
    Dedicated Scrapper
    Join Date
    Nov 2005
    Location
    Ascoli Piceno, Italy
    Posts
    2,258
    View Gallery

    Trader Rating: (1)
    http://www.ilovecraftrobo.com/
    This is Sandy's site - her comment referred to the fact that some of us had already been in contact and exchanged tips and hints. Her site is great fun and contains some very good tuts.
    Susibi

  15. #15
    Diehard UKScrapper sandymcc's Avatar
    Join Date
    Nov 2005
    Location
    Tempe, Arizona
    Posts
    656
    View Gallery

    Trader Rating: (0)
    Yes, go to www.ilovecraftrobo.com and then click on Tutorials and then look under Wishblade Class Tutorials. My Inkscape tutorials are Wishblade 301 and 302. Let me know if you have any questions.

    Sandy

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Click HERE for additional Sponsors


All times are GMT +1. The time now is 04:03 PM.