Printable View
This post was prompted by the number of requests I had last week to write instructions/tutorials for a couple of things, so I thought it might be worth starting a new sticky thread where people can post requests for tutorials on how they can make cutting files for things they have seen.
If it is only general help you need eg. where is such an option, how do I make a line dashed or how do I draw X please post in the general area of Chat.
Hi Lucille could you possible write an easy tutiorial on how to do a print and cut so that I can contribute to June's challange. Thank you
Jane x
Thankyou Lucille for the tutorial. And thank you Dorren You are both very kind.
xx
I love flourishes and swirls for my scrapbook pages, and would love to be able to design in studio to cut them, please could you help with a tutorial?
Thank you
Suze
me too pleaseQuote:
Originally Posted by craftysuze
Sorry no can do, I can't write a tut for a function Studio doesn't have and I don't do drawing lessons, but you can use the drawing tutorial for RoboMaster if you like torturing yourself or learn to make them in Inkscape which has the Spiro tool.
I'm sure I've seen something about transferring GSD files into Studio, but do you think I can find it? No I can't and I've searched everywhere I can think of. Can anyone help please? I've tried clicking on the Import Robo Master files but nothing happens.
If you change the file association from RoboMaster to Studio, then you can open them by double clicking on the file.Quote:
Originally Posted by jenniec
To answer your query there is no tutorial for that. Studio works the same as all other programs do with regard to opening files, it has it's default format and there is a drop down menu for the others, if the format isn't on the list then it doesn't open that format.
Thanks Lucille, the font of all knowledge, as usual!
Hi
How about a tutorial for a lattice with a words or initials in the middle of the lattice
Thanks
Chris
Chris your tutorial is there now.
Thanks Lucille I shall have a go tomorrow to see if I can do it also get the grey cell going hopefully.
I will let you know how I get on
Many thanks
Chris
Lucille how would I make a mat with an edge of offset snowflakes, like this one please?
I have already worked out the small and large snowflakes, just would like to know how to put them around the edge of a mat with the offset.
Is this the sort of look you are after. If so, I will give you some guidance if that's ok with Lucille. As I use a MAC, the dingbats are not exactly the same as yours, but you will be able to produce something similar yourself. HTH
Yes, but without the green please. It is so I can cut a mat with a snowflake edge. I can do without my punch around the page punches that never line up properly.Quote:
Originally Posted by fimcc4168
Thanks :thanks:
There isn't a function that will do this for you in Studio, you will have to place the snowflakes yourself.
I would do one line, then duplicate and rotate to get a second side.
Line up the second line with edge of the first.
Weld if necessary eg. overlapping the end snowflake.
Select all and group
Duplicate and rotate and position to make the square
Select all and group again
Now apply Offset path to get your outline.
If there any bits inside the outline, ungroup or release compound path, you may have to do both depending how you make it.
Now drag the out line away and your square of snowflakes, select all the bits and delete, now you have what you want a square shaped mat, with snowflake cut out's around the edge.
Thanks Lucille I will have a go. :thanks:
Hi I'm trying to get to know mt new cameo and I was wondering if anyone could help with making a paper piecing from a coloring page. I think I saw a tut for robomaster on here but i cant find one using the cameo softwere. I hope it is possible to do with a cameo. Thank you
There is a tutorial for using the trace options it's in the Studio folder, look carefully as some of the sub folders have more than one thread/tutorial in them.Quote:
Originally Posted by efs1038
Does anyone know if there is a tutuorial on how to make a number card? I want to make a 25th birthday card but I am new to studio and I haven't got a clue as to how to get started.
Have a look through this thread and tell me which sort of number card you want to make. This thread only goes from 1-12 the other numbers are split up into various other number card threads.
Thank heaps, Lucille
Hi Lucille
I have checked out that thread and there are a couple of styles that I really like the 5th birthday with the happy birthday cut out and the 12th card on a platform. I've attached them to make it easier for you (hopefully)
Thank you so much for your help
Kylie
Sorry you can't upload files in the Chat forum, anyone can download them from here, just tell what the file is called and I will go and look, or tell me the thread title and what number the post is, I should be able to find them from either lot of information.
Before I start writing anything did you look to see if what you want is already in this thread http://www.ukscrappers.co.uk/boards/...d.php?t=175562 I believe it's the number 25 your are looking for.
Just had a look, there are 2 files for age 25 cardsQuote:
Originally Posted by Lucille
I love the "30th on a platform" and the "50th on a platform".
I'll write up how to do it today and post in the Studio tutorial folder.Quote:
Originally Posted by MrsE
Not being very artistic I have searched high and low for designs which are sport or gym related, such as cycling, running, girls and boys! Jogging, weights, spinning - actually anything ! Come to think of it, unifroms would be goos as well male and female, especially if they have a UK flavour
I have ordered the new Designer update which will allow me to perhaps design something via CorelDraw and send direct to the Silhouette but I would have been happy to buy a cd with designs!
I have downloaded 3d designs from the shop but there doesn't seem to be instructions to join everything together e.g. the wonderful flower pop up box. Am I missing something?:rolleyes:
Love love love my new machine, so much easier for me than the scan' n' cut
Welcome to the forum Janet. This thread is over two years old. No we don't have a wish list but we do have lots of tutorials hereand if you get stuck someone is usually around who can help. If you're using Corel Draw I believe you can save your design as a DXF and then open it in Studio you don't need the DE for that. We do have hundreds of free files but you need to have made 10 posts to be able to get access, the posts can be on any forum on UKS
Hi I have recently decided to start using my craft robo again but I have realised I have put my computer away years ago and all my robo files were on it . Can someone give me an easy file to do on my robo to help me get back into it please it doesn't matter what it is it's just to get me started again I can't remember anything about how things work it would be grateful thank Jessie
Jessie there are loads of files in the template section if you have access to it. Also if you have installed Studio on your computer and connected your Robo you should see 50 files in your library.Quote:
Originally Posted by pennylucky
Oh that's great thanks I will have to go on my laptop and give it a try thank you very much for your help Jessie