The title says it all I think !! Available in svg, studio and gsd. If you'd like to have a look you can find it here.
Printable View
The title says it all I think !! Available in svg, studio and gsd. If you'd like to have a look you can find it here.
Another shelf type card especially for the girls. Like the others it folds up flat for posting. If you'd like to have a look you can find it here
Hope someone can use this shaped card. Will fit in a 6" x 6" when squashed flat.
here is a tealight card for you, I followed the measurements from the video link.
I haven't cut it yet, but I see no reason for there to be anything wrong, I will check it out as soon as I can.
I have set the cut line and perforate lines but please double check before you cut.
I have replaced the original file I had got some measurements wrong, sorry for any inconvenience cause by my mistake.
I have tested it now and this fix is the right one, will post a photo shortly
PS sorry about the missing Y in the heading
Here is my Star Card
Cath
Here is a tag card I made recently. I have removed the poppies (digital stamp from Little Claire) and the gingham was a glittery card I cut. I have left the writing which can be changed or deleted, the font is Parisian BT. I've also made the ribbon holes slighty smaller since the photo as I thought they were too big. I have not done score lines as I don't like them and it is very easy to see where to score with an embossing tool.
Ruth
the bit you fold down makes the stand
the part you cut and fold down makes the stand
This is a variation of a card I saw on another forum although it wasn't a cutting file, the topper is included (butterflies are from the Studio library free files)
love this design again fold down to the top bit and tuck in the bottom piece make the stand, clear as mud :huh:
Seeing MaryAnne’s brilliantly original idea for a Carousel card here, made me want to have a go at making one of them myself. I found it surprisingly easy to assemble following the very clear instructions on MA’s blog here and I think the possibilities for decoration are almost limitless. MaryAnne has kindly given her permission for me to share the template that I made, and I have included SVG, GSD and Studio versions in the zipped folder attached.
I made some slight changes to the original design by altering the dimensions of the triangular boxes so that only 5 are needed instead of 6. This means that the outer wrapper need only be A4 in length and the finished card 5 inches high. I have also added a scalloped edge to the oval openings and embellishments.
To complete the card you will need to cut the template 5 times. Assemble each triangular box by first gluing the flaps on the top and bottom to the inside and then gluing the side flap to the outside (so that the flaps will not be visible when the card is opened).
My Robo can’t cut a full A4 sheet, so I cut the outer wrapper by hand (A4 in length and 5 inches high), but I have included it in the template for anyone lucky enough to own a Cameo or larger cutter.
The first box should be attached to the outer wrapper starting flush with one end of it. Score a fold line next to each box after you’ve attached it and bend the card up to make the fold before adding the next box. I attached a length of ribbon at the back of the card to tie it closed and held it in place at the front with two scalloped embellishments on sticky foam pads.
I do hope you’ll want to give one of these a go, as they are great fun to do.
.
Just made this card for Mother's Day. I hope the studio file is self-explanatory.