Lacé - Cards and Toppers

I've done some circles and two heart shapes that I've found quite useful. The picture is not too clear though I'm afraid. :unsure:

I love designing lace (They are easy) this one is cut down the spine of the card then copied down the front edge. hope someone can use it. It cuts well, I have more filed away so will upload when i get back from hols in a few weeks
Dee

This is the template for a birthay card I made for my brother. You can see it in my gallery.
Green line is cutted separatly for the backing.

Monica

A Couple of cut and folds hope they will be useful.

Trying to upload another template hope it will be useful to somebody

I really cannot understand why I cannot upload my phot to my album, as these files have just gone straight through.

Thanks ever so much yes it works you only have to hit the letter b once the node is red
something so simple could have saved me a lot of grief yesterday, as i have said before i have only had my robo since february and i try to make my own designs and seem to be doing ok and then i come unstuck
i did manage it in the end but for the life of me i cant say how pressed that many buttons
i will upload the file i was working on to show you

I have added the GSD file as a few of you have asked but its all thanks to Joyce (2magpies) she must have seen this post and did it for me
Im still trying

I hope this lacé card will be useful.

It was designed in Inkscape and traced by hand in RM to give a smoother cut. To assemble it, the teddy outline halves should be folded over and tucked under the neighbouring teddy’s paw.

This was great fun to do, :comp: and after all the lattices I have been cutting lately, I was nice to cut something that made no confetti at all. :lol:
.

Thank you Tina. Here's the template and screenshot

Just fold the chevrons downwards and thread ribbon through Lookes quite effective.


Hope you can use

I saw something like this at a show thought i would replicate.


Hope you can use

My mum died 10 years ago so I don't really do mothers day cards either.
so I did spring bunnies.
fold each one over and tuck the leg under the next bunny. each one is seperate so you can add or take away to your hearts content, have fun.

Quote:

---

Originally Posted by silverst170

Lovely Card Kris thank you.

once again I apologise to all who no longer have their Mum's with them.
That's Why I did spring too so everyone could do something and we have had some wonderful uploads thank you

---

no probs tina still have MIL :huh:

again fold the wing back and tuck under the next butterfly wing

thought I had uploaded this one but I cant seem to see it ... or am I going daft on second thoughts don't answer that <_<

Based on a Sue Smith design seen on C&C this morning. Hope someone can use it. (There should be an accent over the e but can't find out how to do that!) O.K. that should read Lac&#233; (Thank you Myra)

A different take on lacé frames.

I made this in Inkscape after reading the tutorial "Lac&#233; circles and lines in Inkscape" by 2 Magpies. Thank you very much.
I cut it in Inkscape and it was so quick.
Haven't cut it as a GSD.
The card isn't finished yet.:lol:
Servalan

look what i made

Well it's a circle and it's made with rounds :lol:
Made and cut in inkscape.
Servalan

Just a line this time.
When I made the card I cut a dotted line down beside the lacé so it can be taken off and used as a bookmark.
Servalan

Not sure if this one is any good or has been done before. I have seen the oval, circle and straight ones in the latest templates by Servalan but not a square. It's my first template so if it can be tidied up in any way please do. I could do with all the help I can get.

I am learning but really slowly. :lol:

A scalloped circle this time.
Made and cut in Inkscape from great tuition by 2Magpies.
Servalan

Here's my teddy lacé thanks to the tutorial and idea from 2Magpies.
It's a bit finer than the others. Cut in inkscape.
Servalan

Here's my rabbit Lacé, made and cut in Inkcape.
Servalan

I made this in Inkscape after reading the tutorial "Lacé circles and lines in Inkscape" by 2 Magpies. Thank you very much.
I cut it in Inkscape and it was so quick.
Haven't cut it as a GSD.
Servalan

This is not how I intended it to be but it doesn't look too bad. I originally put red behind the card but I couldn't get a decent photo (it's really overcast here today and it's) with the red showing up so I changed it to black and scanned it, i#ve put a piece of pink card behind it so the whole card shows up.

This was made following Joyce's (Inkscape) tutorial here , thank you Joyce

Another one made following Joyce's Inkscape tutorial here , thank you Joyce

thought this might be nice for St Georges day card or layout

Thank you for setting this month's challenge Jayne, and for the files uploaded so far - they are all great. :thanks:

I have made a lacé topper that I hope will qualify as Steampunk too. :unsure: Once the topper is cut, fold the outer edge of each gear back and tuck it under the inner part of the gear next to it, to form a circle.

SVG, Studio and GSD files are in the zip folder. I hope they might be useful.
.

This was made following Joyce's tutorial:thanks: Joyce

I've been using Joyce's tutorial to try my own lace' topper. Hope you find it useful. Please note the embellishments are not part of the cutting file.

This is a double row lace topper.
Hope you find it useful. You can also download the single row version on my blog.

Another attempt at a lace' (tuck and fold) design. Hope you find it useful:D
You can also download it from my blog

Bit early for Christmas I know but thought you might find this useful