View Full Version : Lattice and Lacey Apperture Cards
etui22
03-04-2007, 10:44 PM
Are you all getting sick of these yet? :lol:
Theres a diamond on its own,
a diamond with smaller scallops
and larger scallops with either 1 cut or 2
Now, theres a debate going on - is the lattice too small on this one? - I am not sure - what do you think? let me know and hubby will do a larger trellis.
etui22
18-04-2007, 10:55 AM
simple square card for Daz - change the square in the middle if you dont want it to cut out -
not had time to cut out yet
hope its not too girly lol
etui22
30-04-2007, 02:07 AM
Octogon shaped card with dimond boarder with insert
Have not cut insert out, please check on scrap paper before using your good stuff!
just been pointed out that I have not checked the dashed line in the cutline settings - please make sure yours is set properly and proberly the insert too!! in the naughty courner for me!
etui22
09-05-2007, 04:25 PM
As requested by Madhattermillie
ones more robust, one a bit more fancy which is a bit tricky but try and see what you think is best for you - also insert to match.
Template only on UKScrappers
dawnywol
18-05-2007, 11:16 PM
with inspiration from frogzone and the octagonal frame template from etui22 - suitable for a 1st birthday or 1st anniversary. Thank you both!
etui22
19-05-2007, 10:58 PM
A lacey and delicate card reminisant of a church window - I loved doing this one - more to come of these!
I have included the previous insert so you dont have to go looking for it .
enjoy
sugar n spice
01-06-2007, 12:46 AM
sorry I the leaves I used were not mine to post.
etui22
03-06-2007, 12:05 PM
A sunny good morning to all!
hope you are all well and enjoying the sunshine while it lasts... :-)
Was having a play with this design of hubbys last night and came up with these - from the basic one , I ended up with five!
I,ve included the insert again so you dont have to go hunting for it - also they are all one cut , so those with Pro,s hopefully will not have any trouble.
I hope you all enjoy my Octogons and have a great time making cards with them.
take care
Etui22 (Lin)
sugar n spice
03-06-2007, 04:04 PM
again not as good as other lattace cards but cute.
muttles
27-07-2007, 05:50 PM
Enjoy!!
(card photo by elaineburnett)
Lynn
muttles
18-08-2007, 07:04 PM
This is a the piccy of one I decorated in my gallery (but I definately must make some more butterfly toppers run out of the colours I need).
Lynn :wub:
~*Anna*~
17-12-2007, 06:32 PM
I've already uploaded all my files but I stuck them all in one thread and poor Lucille couldn't move them so I'm uploading them separately as it won't let me attach them to their original posts in the temporary forum.
valeriepalmer
27-12-2007, 04:48 PM
My first attempt at lattis work, took forever. Just wanted to cut it and see if it worked. feel free to use and add your own details.
Val
Ps I havn't spent my christmas doing this! most of it was done before.I had a great xmas hope you all enjoyed yours.
Ruthan
21-01-2008, 04:52 PM
Did I see someone issue a 15 min challenge?
This card was cut and assembled within the time to qualify as a 15 min card. I used doublesided sticky sheet to stick the liner to the front inside of the card and covered with Glamour Dust. I added a bit of gold peel-off stringing and a greeting, stuck on some pre-cut embellishments - I always have these to hand as stock items - and voila a quick card is done.
The leaves I used for the embellishment are in the 2nd file. I always find it handy to cut these sort of things in a couple of shades of colour so that I always some to hand.
Ruthan x
Lindyloulou
24-03-2008, 08:00 PM
Just a basic lattice card to add to the growing collection on here. The butterflies were cut from a pearl card so did not photograph too well.
Lynne
rugersmum
12-04-2008, 10:30 AM
Hope you like and can use, the flowers could be enlarged and used doenside of scrappin page or just as a topper on card and many other uses I am sure you can find for it
xx
Lindyloulou
17-04-2008, 04:47 PM
Here is my effort. Designed in DM and I have included a GSD version. The card in the picture is unadorned and cut from the DM version.
Lynne
Ann Harrison
24-04-2008, 06:03 PM
Hope someone can use this Flower lattice I've made, it was designed in DM. The Butterfly and Bow are from EricaP thank you .
Bye for now Ann
GSD convertion by christine mckie
silverst170
18-05-2008, 03:14 PM
hope its ok for some to use
silverst170
20-07-2008, 12:49 PM
This was a dream to design and cut.
Adorned with beautiful lattice once again and has elements from the Geisha Girl to the Lotus Flower. Only some of the pages are shown below.
Has many elements for you to layer if you so wish........... Once cut and assembled you have a stunning card to give to that Special Person.
Comes as a 9 template zip, All you need is the card and some ribbon to tie.
You can find it here (http://forevermemoriesforyou.co.uk/Shop/index.php?main_page=product_info&cPath=2_55&products_id=424)
Thank You Once Again for Looking
silverst170
03-08-2008, 03:36 PM
A latticed front window that opens, With Swags and Tails to each Side.
I have cut a peice of acetate to place behind the window and embossed it with cuttlebug embossing folder stylized flowers, then added some flowers to the front as if they are on the windowsil.
I have cut from 180gsm perfumed card.
Cuts to a full A5 size card
you can find it here (http://forevermemoriesforyou.co.uk/Shop/index.php?main_page=product_info&cPath=2_59&products_id=231)
Thank You for looking
Lucille
04-08-2008, 12:12 AM
I just had to play some more and here is a card this time made from my lattice template.
SHARICA
05-08-2008, 12:35 PM
Right .. here is my lattice card .. I designed the shape with a star and moulded it to a flower type shape :lol:
It also did not like been converted to GSD .. The GSD Cut was Awful
Shaz...xxx
Converted to GSD by Wishful Thinking
I don't know if this will cut ok because the stalk may be too thin. If anyone would like to try it could you please upload a picture?
Thank you
Caed with a lattice diamond panel
The dots can be moved off of the ladybird and either cut seperate and stuck on or use a felt tip pen to mark them on the ladybird
Octagon card for anyone who would like it
2magpies
26-02-2009, 09:14 AM
Two lacey aperture cards with toppers designed in Inkscape 0.46 using the stitch sub-path Live Path Effect.
Files made in RM 2.4 so hopefully everyone will be able to open them.
Hope they are useful. :)
2magpies
26-02-2009, 09:17 AM
Two more lacey aperture cards with toppers designed in Inkscape 0.46 using the stitch sub-path Live Path Effect.
Files made in RM 2.4 so hopefully everyone will be able to open them.
Hope they are useful. :)
2magpies
26-02-2009, 09:22 AM
Another two lacey aperture cards with toppers designed in Inkscape 0.46 using the stitch sub-path Live Path Effect.
Files made in RM 2.4 so hopefully everyone will be able to open them.
Hope they are useful. :)
This was made using Joyce's tutorial I hope I've got it right:(:(
The file has been changed for one that is similar because the one I originally uploaded wasn't the same as the screenshot
another card made with Joyce's tutorial. I think I'm getting the hang of it now:lol::lol:
Here's the third one. This was a real pain in the you know what. It just wouldn't cut right at first but seems to be fine now
Two the same design one as a topper and one as a card
One for a topper one for the centre of a a card. I love the monochrome look
Silene
09-03-2009, 08:02 AM
This is a card I made for my sons birthday.
Hope you like it.
:thanks:
Monica
hazel7797
09-03-2009, 03:43 PM
Another generic card that could be made up for either sex and any occasion! You can find it HERE (http://www.crafty-cuts.com/genericcardspage2.htm)
:thanks: for looking!
Hazel xx
Wishful Thinking
11-03-2009, 01:13 PM
There are some very pretty designs that can be made with the Star Tool in Inkscape. I used Brian's converter so I hope all will be well. If not please let me know.
Ann Harrison
14-03-2009, 02:10 PM
I have made this appiture using the transformation function in DM.
I have also given you the wording I used and the original oval. Have a play.
Ann
PS. I forgot to say the top layer of the letters I used a pen and then used embossing powder
Silene
19-03-2009, 08:01 AM
Two more cards I have made. One of them is for a friend in UK. Hope she will like it. The second, I will keep for a while. There are so many birthdays to come. It might be handy to have a spare.
Monica
hazel7797
01-04-2009, 03:39 PM
Just a simple cut-out card that can be used for any occasion. You can find it HERE (http://www.crafty-cuts.com/genericcardspage2.htm)
:thanks: for looking!
Hazel xx
BUTTERCUP1617
05-04-2009, 03:05 PM
Ok, here is another one.
Ding used is Kalocsai Flowers - lower case f
Tracey
oops, just noticed that I have put the stem on the last flower upside down - sorry
Two for the price of one this time:lol::lol:
2magpies
22-04-2009, 03:30 PM
Designed in Inkscape using Spring Flower Dingbats (aka CW_EASTS.TTF) and hand traced for a quicker cut in RM 2.4 :comp:
The card cut well, but the weeding took time and a lot of patience. :rolleyes: :lol: :lol: :lol:
Hope it might be useful to someone. :unsure:
.
hazel7797
24-04-2009, 12:24 PM
A card for any occasion, you can find it HERE (http://www.crafty-cuts.com/genericcardspage2.htm)
:thanks: for looking!
Hazel xx
hazel7797
08-05-2009, 02:08 PM
Another card for all occasions, I have included a 'screenshot' of what the template looks like as I don't think the picture of the made up card shows it clearly enough. You can find it HERE (http://www.crafty-cuts.com/genericcardspage2.htm)
:thanks:for looking!
Hazel xx
hazel7797
09-06-2009, 03:09 PM
A layered card suitable for any occasion, with a different greeting of course! You can find it HERE (http://www.crafty-cuts.com/genericcardspage2.htm)
:thanks: for looking!
Hazel xx
Another scalloped card if anyone can use it
Fuschia
26-06-2009, 08:17 PM
Been playing in Inkscape this afternoon and came up with this.
Sorry the pic is only a screenshot, but I haven't had time to make up as yet
It should fit inside an A5 Envelope.
File changed, apologies to all, but this is very similar.
I haven't cut this yet but it should be ok
Udated to say I've cut it now and it's fine but make yourself a sandwich and a cup of tea while it cut's as it takes ages. Of course that's if anyone want's to use it I've never made a shaker card but I've got sooo many small shapes from the lattice's I've cut out I think I might have to make one just so they're not wasted...miser or what?:lol:
sugar n spice
28-07-2009, 06:09 PM
Ok weddings over, guests all gone home, started to make in roads in the extra washing, play time (until the washer stops) :(
This is an adaptation of a font called kings garden.
silverst170
07-08-2009, 03:15 PM
One for all ocassions I think :lol: But I'll let you be the judge of that...
May need some fiddling :lol: I had the picture in my head how I wanted it But getting the card to look like it well :ph34r:
Personal use only please..
lanksewing
30-11-2009, 05:53 PM
Been having a play with the lattice tutorial. Not cut it yet but will have a go later. Hope it is of use to you.
Chris
Hi All, I have converted this file and added a screen shot with Chris's permission G-ma
I've cut this and it's fine...I've just dropped and broke my camera and my mobile
is charging but I hope to upload a picture later on today
Picture uploaded with blue card behind so you can see the pattern properly
mininova
17-01-2010, 07:57 PM
not earth shattering,but i made it all by myself,well with help from the tutorials.
lattice file
Copyright ©2000-2010, Jelsoft Enterprises Ltd.