Square Frames and Overlays

[Lindyloulou]

I hope these are useful.

Lynne

[MaryAnne]

OK the idea of this one is that you can use it either as a smaller frame, to cut from an A4 sheet OR you can use the half frame and cut two (cut one, then flip and cut another - if you don't flip and are using textured cardstock be sure you deal with that by positioning the paper correctly, one texture up on the mat,one texture down!) then cover most of a 12x12 sheet. Does that make sense?

It cuts fine for me, I'll add the .jpg from the other machine in a moment.
Font: Floriat (I used the upper case ABCD) Ornamental frame

[lesleyuk]

Been meaning to upload this for a few days so thought it was time I actually didi it.
Nothing spectacular but thought someone may find a use for it.

Sorry about the scan thats wonky too!

[DJG]

Just a simple frame hope someone can use it

[Silene]

Here are some more frames. I choosed not to cut the red lines in my pictures.
Enjoy,
Monica

[Silene]

Here is another frame I made a couple a days ago.

Monica

[Silene]

I hope you don't get tired of frames. I love to do them and I have so many ideas to try.
These frames looks a little bit like the kitchen tiles from the 70's I think. Be careful when lifting it off the carrier sheet.

Monica

[Silene]

Here are two more frames.

Monica

[Silene]

My contribution to the July Seasons Challenge. Hope you like them.

Monica

[Silene]

Time for some more frames...
Enjoy

Monica

[Silene]

For those who like hearts...

Monica

[Silene]

Yet another frame. Hope you like it.

Monica

[Silene]

I suppose you need one more...

Monica

[Silene]

Another two frames :D
I can't figure out how on earth I am going to have time to use them all. Hope you do!

Monica

[Silene]

These frames are a little bit different from what I have done before but I hope you like them anyway.

Monica

[valeriepalmer]

Heres my attempt at the August challange, sorry not very good photo and I have altered it slightly since I cut it as it wasn't squared up properly.
Anyone got the kettle on? My drinks just gone cold while I've been fiddlin'

Valxx

[Silene]

Hope someome can use this.

Monica

[Silene]

This is the frame I made when I was writing the tutorial for "Making laced frames" which I uploaded at the chat forum. I prefer to work in AutoCAD but this frame is made entirely in Robo Master.

Monica

[Silene]

How about this? I was inspired from a TV program where someone had cut a big circle pattern on a field.

Monica

[Silene]

I'll never get tired of flowers. Hope you like them.

Monica

[Silene]

I have been playing again and came up with this. Hope you like them.
:thanks:

Monica

[Silene]

Here is some new ones I mad a few days ago. Hope you like them.

Monica

[Silene]

Yet another one...
Enjoy

Monica

[Silene]

Time for some more frames :rolleyes:

Monica

[Silene]

Another two frames. Hope they are useful.

Monica

[Silene]

Another swirly one...

Monica

[Silene]

Here are some more swirly frames.
I feel like I'm clogging up the forum with all my frames :wub: I hope you don't mind :D
Monica

[Silene]

Some other ones...

Monica

[Cathben]

This is my first template, not cut it yet.
Cath

[Silene]

It was a while since I last posted here. I've been so busy with so much other things.

I don't recommend to cut these frames smaller than in the files. Hope you like them.

Monica

[Silene]

Hope someone can use this.:)

Monica

[silverst170]

Simple Frame for layouts

[Silene]

These frames you can cut quite small if you want. I have made several different shapes with these and will post more of them later.

Monica

[Silene]

Same as before but different.

Monica

[Silene]

This is the last one.

[Silene]

Here is a couple of frames I made about a week ago. As usual you can choose if you want to cut them as frames or mats. Just untick the red lines in the cut menu if you want to cut them as mats.

Monica

[Silene]

Frames, toppers and a corner with the same pattern.:)

Monica

[Wingus]

Here's my last frame example:

* Made in Illustrator, converted to GSD in RM4.4.
* Element used from Floralia dingbat, letter f (altered quite a bit!).
* I have added a mat, and another slightly different version of the frame, but with only the outer bit. I thought it might make a more interesting frame.

Enjoy!

[silverst170]

One for you hope you can use.......

[scrappy jan]

Here's another offering
Hugs
Jan x

[SylviaF]

There are some lovely templates on here now - thank you everyone!

This is my 2nd entry for the challenge and is actually part of another template which has been converted to make a frame. I shall post the main template as soon as I've converted it.

Sylvia x

[anncrafty]

Hello all, this is my first frame. I used Monica/Silene's tutorial for Robomaster. I hope it will be of use to someone. I would just like to say thank you for all the lovely files you all share.

Ann

Sorry I put this in wrong place it should have gone into June Challenge

[2magpies]

More fantastic frames added since I last looked, thanks to everyone for sharing them. :thanks:

I wanted my entry to look like a moulded picture frame that I hoped would be useful on LO’s. I have used about 2 dozen concentric squares drawn with metallic gel pens on white card to try and achieve this effect. I’m pleased with the result, as it looks quite effective ‘in the flesh’.

:comp: The grey lines on the template should be drawn first with a gel pen, and the black lines are cutlines. :comp:

The photo I have used is of an unnamed ancestor, so if anyone recognises her – that would be a huge bonus. ROFL.

[silverst170]

Sorry only screen Shot, camera needs charging, But I am sure it will cut ok

[2magpies]

Another frame, also designed in Inkscape and hand traced in RM 2.4.

Please PM me if you would like a 12" x 12" zipped SVG version of the file for larger LO's. :comp:
.

[2magpies]

I designed this cutwork bracket frame in Inkscape and hand traced it in RM 2.4 for a quicker cut.

Please PM me if you would like a 12" x 12" zipped SVG version of the file for larger LO's. :comp:
.

[DJG]

Hope its of use to someone

[cattiegracie]

At last, what should have been easy, turned out a nightmare, this is not my original frame, after having trouble getting it to cut good, I asked for advice, and before I could complete it, my bloomin' laptop chucked it, I think the hard drive has broke. So this was one I done while having all the trouble with the other one, but I luckily done this on the main computer.

the shapes font is WINGDINGS 2, the words font is just a plain font that I traced over with the Closed Spline tool, because I didn't have a stencil type font installed, which means of course, you could tweak it to suit yourself, and the letter o is just the letter c rotated:lol:
It cuts no bother, I will either add a photo here of it, or, it will go into my gallery.

[cattiegracie]

Since this is the last day of the challenge, here is the file that cuts very very slow, I hadn't realised I had kept it on the main computer, but I thought this morning, that I may as well share it, you never know, maybe some one will want to play with it.
The font is a problem, I think it is bel........something.........93 or 73 the problem is the font is on the laptop, which of course I now can't use, sorry about that, the other shapes are all dingbats, which was as above.
It make me wonder, if I am going to design on a laptop, I should save it on the main pc as well.
Anyway the font and dings have all been worked on, so you won't need to have them installed.

Thank you Winnie, for a challenge that I got my teeth into and persevered with, it was one I particularly enjoyed playing with, even though, it was driving me up the wall.

[Mysticwhiteunicorn]

I can upload some instructions if anyone wants them but im only a begginner and Im sure theres a quicker way than mine. Do the instructions go in the post comments or as an attachment.Cuts ok
Jayne

Inserted JPEG into blank document.Get outline .removed jpeg and welded outline .1 Copied and paste sent to back clicked offset shape.Clicked on new offset shape outline and repeated step 1.

Made in robo 5.1

[Lucille]

Another one this took seconds to make. I picked a leaf shape I liked resized it really big then used it to cut out a leaf shape from the previous template (like we do in the lattice tutorial) made a frame from a duplicate of the first leaf and welded one to the other.

[Caroluk]

I saw some mats like the flower one on create and craft, won't mention the person showing them as I don't think it is allowed, anyway I saw them and they were quite pricy for what you get so I decided to play around and do my own.The snowflake mat is my own idea as I needed a nice mat to showcase one of Silenes fabulous snowflakes.

Apologies for the image, obviously gold & silver mirri card and a scanner don't mix :lol:
As you see, the different sections of the mat can have different colour paper/card behind them so great for using those little bits I tend to hoard as they are too pretty to throw away :D

BTW, use quite thin card otherwise the small pieces won't come out without tearing the mat and don't cut them too small, I made mine to fit 135 x 135 mm square cards.

[annekev]

Here is my attempt at the November Challenge, hope you like it. i have used, font from Spatz, the clip on the typewriter,& the polygon icon.

[jeffbond]

It makes me think of a cushion ..and don't know what else to call it so a cushion is as good as anything :lol:

:love:Sharon:love:

[mininova]

been playing again.
i tried to add a picture ,but it didn,t happen .sorry