Christmas Cards

[susibi]

Here are three things I hope you'll find a use for:
A4 folded card tree opening. Print and trim edges.
A4 folded scallop edged card print and trim edges.
small box suitable for tiny gifts or business cards
Enjoy,
Susi

[susibi]

Christmas in July! Now I've had the input for the word edged cards I can't stop - cut this in thin mirror card and it looks very good. Could also be resized to use as a mat on a card.
Susibi

[AliMayes]

My first effort with inkscape. You can resize it either way to make any size card. Ali

[susibi]

A Christmas card - and how it turned out- cut in blue card and backed with gold. There are score marks at the sides of the card for the centre fold - join with folding tool
Susibi

[candles and card]

Hi All

Just Been Playing With Christmas Card Ideas And Made This Up In Inkscape, Just Cutting It Out Now Its A Little Slow Becuase Of The Detail But Thought You Might Have A Use For It!

Rob


Picture courtesy of Dozyrosy

[stressed]

Someone on here asked a few days ago about a happy birthday pop that they couldnt find in the template section and i was able to point them in the right direction , anyway i decided to make one for christmas for anyone who may want to use it.

I know I have given templates before but this is a sort of a little thank you to everyone who gave me help when I first got my robo.

I cut it and made a card with it that i have uploaded into my gallery on here as well.

Hope you like it, the photo of the inside isnt great its not easy photographing a popout card!!!!

[ErikaP]

Hi here's another one I made last night.

Very elegant.
Once again be warned, the folding takes some time and patience. As a lot of the joins are quite fine, do not try to force it to fold too quickly or it will break.
TIP; Make sure that where the tab joins the star, the cuts are right through and the waste is free. Even though all the lines on the template connect, if your Robo is just 1mm out it can leave the waste connected.

Enjoy
Erika popup

[dozyrosy]

Here's a Noel word card that I adapted from one I saw in a magazine. You may need to check that the length is OK, I've done it on the Pro and I think the carrier sheet "boundaries" are not quite the same - I seem to be able to cut a bit longer but not so wide.

You may need to wishaway it.

I'll upload a photo tomorrow when I've had time to assemble it! (Edited to add that I don't seem to have taken the photo!)

[popoffblue]

hi hope this is of use to any one.
i have put a few on one sheet may be a bit small but you can resize it.53287
Merry Christmas everyone.

Leanne topper

Image courtesy of kztmiz

[LaaLaa70]

I've done this 10x14,8cm photo frame with some snowflakes outline.
Hope someone will find it useful.
Bye
LaaLaa

PS: I found setting the right size in RoboMaster is a pain. Is there a tutorial on mastering it?

[mothershotel]

Hello Everyone, I dont know if this has been done before but I fancied a bit of paper weaving so designed the attached files to use for Christmas cards, I have adapted it since for using to cut a full card front and changed the shape for other fronts. I am hooked now
hope someone can use it
D

[shell24]

This is my first attempt at loading a picture aswell as the gsd so hope its worked !
I am probably stating the obvious but when you cut them, cut each colour seperatly, i am saying this because my first go i forgot. Hope you like it and find it useful. Shell x x

[Minty Magic]

As many newbies, I am extremely grateful for all the wonderful templates, help and inspiration that this forum gives me. This is my first template (based on the wonderful cards by Shirley Anne - sorry Shirley if this steps on your toes, but I love yours so much that I wanted to try something similar myself!!!!). I tried cutting it several times and it seems fine. The Santa's face I actually drew using the Pen facility and then have just glittered it to make it a bit snazzy and then cut it out using scissors - argh!!!

I have put it altogether in a bit of a rush as I was so excited that I have actually managed to make a template of own - hence the glue smudges.

So once again thanks for everything guys - the CR is fab and I feel like I am finally getting to grips with it - with all your help xxx:wub: xxx

[ErikaP]

Hi I saw the post of the on the round template and thought it was a neat idea. Here's my version. Quick and easy to make. Robo does all the work.

Designed in Inkscape using Pattern to path, traced in Robo. Storybook font.

Cut from a variety of cards and papers.

ErikaP round

Envelope GSD here (http://www.ukscrappers.co.uk/boards/showpost.php?p=3856204&postcount=11)

[ErikaP]

Hi all,

The second version of letters on the round. The trees are raised on decoupage pads and decorated with peel off waste.

Designed in Inkscape, traced in Robo. Storybook font.

Another quick and easy card since Robo does most of the work.

Hope you like them.

ErikaP

(Mind you it's strange taking photos of Xmas cards when it's 35C. I must be mad!)

Envelope GSD here (http://www.ukscrappers.co.uk/boards/showpost.php?p=3856204&postcount=11)

[ErikaP]

Hi,

This one is courtesy of my daughter, Helen. She described it and I designed it. It took a bit of weeding as the snowflakes are very fine. I cut the blue from card and the other bits from 120gsm paper.

Helen has really got into thinking about different design ideas, so look out for some more from her.

I hope you like it.

Story book font, WWflakes font, designed in Inkscape, traced in Robo. Cut the small Let it Snow and the snowflakes slowly, I used speed 2.

ErikaP

:P4.30 here and 35C, so off to the pool for a dip now!

Envelope GSD here (http://www.ukscrappers.co.uk/boards/showpost.php?p=3856204&postcount=11)

[kassy]

made this a few weeks ago but being unable to upload for a quiet a while, just read the thread about some thing being changed and yeaaaaaaaaaa i am able to post again.
this is a print and cut
popup

kate

[kassy]

another pop up insert, print and cut.

kate popup

[elwoodsusanm]

Been playing with letters and came up with this. Big Mummy font. really simple. Not a lot of room to write who it's from but it looks effective (I think):wacko: The holly paper is from Crafters Companion CD.

Please set green line to dotted in the settings. The reason for 2 red lines showing is that I did copy/paste as I needed 2 cuts. You can delete one layer if you like!:wacko:

[Celia Reed]

I would welcome your comments on my first attempt at a Christmas pop-up. The outer card and insert were both cut on 160grm card , red cap, speed 10 and thickness 30 (My robocop has a blue lid). I put a piece of Mirror Card behind the cutout so that it would reflect the sleigh. It cut like a dream with only one pass. My inspiration came from the lovely Filigree Sleigh made by thecountryrose, many thanks again to her. The font I used was Worstveld Sling Extra. I cannot remember the source of the 'reindeer choir' but I have had it on file for several years. The gift boxes were definitely copyright free clipart.
Nervously awaiting your comments!

A couple of hints for newbies. Firstly, if the filigree 'chews up' when cutting, this means that the carrier sheet is not tacky enough. The filigree is very delicate and if the carrier sheet is too tacky then it will be difficult to remove without tearing. This is really a hint for people making their own carrier sheets. The standard sheet should be fine. Use the red blade and only cut once. (Double cutting may also tear the filigree). Take your time (slowly does it) and if possible, use a slender palette knife to remove the sleigh from the carrier sheet. Look at the picture to see which way the folds go. Bend each fold a little bit at a time until you reach the full angle. The card was assembled with double sided tape. Most of all ENJOY!

Celia

[Celia Reed]

Thank you girls for your kind comments. Here is the gsd file you requested.

Celia round

[cheekymole]

This is only my second template since getting my robo on Friday so please be gentle!

[kassy]

just made this xmas insert print and cut, but i wrote the verse using stardust gel pens using Robo, on speed 8 depth 16 using font park avenue BT on medium card, dont forget to move verse and dashed middle before printing have moved off my name so able to print your own in the verse

kate

Font used is park Avenue Bt

[Shirley Anne]

This is my first try at doing filigree and I'm quite pleased with it. I drew the shapes for the filgree in Illustrator then saved them as a jpeg and autotraced them in Robomaster. The card itself I did in Robomaster so everything cuts OK. I used a thickish card for the base and and a medium weight one for the green filigree and pearlised gold card for the other one. Hope you like them.

[Shirley Anne]

Got this idea from Making Cards magazine. I cut both the card base and letters in the same thickness of card as the top part of the letter P sticks out from the base of the card so it would be a bit floppy with thin card. It fits in a DL size envelope.

[Photo queen]

Here's a simple lantern card, with holly and a candle

[ErikaP]

Hi

Just a quickie. Very simple but effective. Fits an A6 card.

ErikaP

PS ignore the not very straight wording. Having a shakey day with the old Parkinson's.

[etui22]

This is for a lady called Evelyn -she wanted some stairs to decorate with a tree and presents

Cut in medium weight hammered card - two cuts, just over med speed , top pressure and pink cap - newer machines will proberly cut with less pressure.

my tree is a green triangle covered with punched branches.

Lin
note -added a tree for you to play aroung with - from Dover Clip Art

[carolinett]

Pay back for the templates I have borrowed of you guys It's my first attempt so go easy on me I hope you like it. The second photo is the inside of the card.

[SylviaF]

This simple border was designed in Designmaster, and I have used it on a card posted recently. I have managed to make it into a GSD file thanks to the very clear instructions from Susib. It can easily be resized to suit. This is the first template I have managed and it is quite clumsy compared to the lovely works of art on here but at least it is a start. Hope someone can use it.

[kassy]

made this in DM then saved as a GSD file, had to use a zip folder as file was to big to upload, picture not very good but does look pretty when dressed up, ( Edit ) managed to upload new GSD file thanks to rosemary, i never delated the screen capture which made the file to big, so if any one has already used that one they may like to use the GSD file don't know if it would make a difference to the cutting due to the screen capture not been removed

kate

[valeriepalmer]

as promised jen a postbox

[thecountryrose]

And the Holly Jolly card.

[shopmo]

So, on the outside the cut out word says Joy and inside the card the same cutout word says You - sounds crazy huh :lol:

Feel free to use the cutout word in any card, it doesn't have to be a christmas card as it could apply in a lot of instances so just take off the holly and the word christmas.

Linda

[Lindyloulou]

I saw something similar in the gift shop in the Tate Modern recently so thought I would have a play. I designed it in Designmaster and made a GSD template as well. Not cut it yet but I am sure it will be ok. Cut the Christmas tree in the appropriate coloured papers and place on the inside of the card so that you can see it through the tree aperture on the front of the card. Feel free to resize.

Lynne


I managed to find the time to cut the card. So uploaded a couple of pictures. I found that I had to reduce the size of the DM template to keep it within the cutting lines of my Robo

[shopmo]

Thought this would be a nice idea for a child (or for any of us that haven't grown up - ok, that would be all of us then :P:D)

I used quite thin card, so have backed the moving bits.

I had to zip the gsd files due to the large graphic on front of the card.

Linda

[etui22]

just a quick little card - mines covered in scrapbooking paper.

you could add a bow, flowers, glitter it up a bit?


Lin

[Shirley Anne]

Reloading file

[Shirley Anne]

Reloading file

[Shirley Anne]

Reloading file

[Shirley Anne]

Reloading file

[shopmo]

Thought I'd upload this here as the crafty club haven't put them up, and although its late to upload for christmas, this might come in handy for the next big card usage which will be valentines!

This is 3 pieces of card - inside one of the pieces I glued the hands inside to make it so that they closed the card, best way for you to do this is to put the hands in a clasp and then glue them one at a time so that they fit together. I also wanted to make it a bit 3d which is why I 'hung' the mistletoe off the card, if you don't want to use the mistletoe, take out the 2 small cuts on the inside card and take out the small rectangle to the side. You can just use the basic gateway card - my advice is to use the thickest card robo will take as the words stand away from the edge considerably and therefore make it delicate. I haven't included the welded word of happy christmas as that was done as my first attempt as a gra file in designmaster.

Linda

[shopmo]

Here I wanted a 'strong visual' card - I took both of the cards I am uploading today to work and people fell into one of two camps, either the kissing one was too fussy or dainty and this card was either clean to the eye or not enough detail:lol: Interesting to see which people liked which best:rolleyes:

Linda

[silverst170]

know it's early but there never is a right time to get your Christmas Cards done is there?
Im starting early this year :D

And here's the latest I have made (http://forevermemoriesforyou.co.uk/Shop/index.php?main_page=product_info&cPath=2_17&products_id=300)


Thank you for looking


Tina xx

[silverst170]

I know it's early but when I get an Idea I have to execute :D


So here it is here (http://forevermemoriesforyou.co.uk/Shop/index.php?main_page=product_info&cPath=2_17&products_id=354)


Thanks for looking

[silverst170]

Well it's another Christmas one again I'm sorry but i have to do what I think at the time


you can find it here (http://forevermemoriesforyou.co.uk/Shop/index.php?main_page=product_info&cPath=2_17&products_id=359)

Thank You for looking

[silverst170]

Another one for Christmas :D

I Know it's early but it soon creeps up upon us all

This one is tag style and once again adorned with lattice.
I have done mine in pink and white :D Pink I can hear you say......... Yes Pink it's my fav colour:D

12 Files once again and comes with box template too, I have made the front of the box from acetate and etched it then got my super glue pen and gone round the letter's the smothered in Glamour dust, The piccy doesn't do the etched glamour dust any justice, it looks really sparkley, but be warned the glamour dust is a big pain to remove as it gets everywhere on the acetate.

You can find it here (http://forevermemoriesforyou.co.uk/Shop/index.php?main_page=products_new)


Thank you for looking

[minky93]

Hi!

This is my Fourth Card & I thought someone may like it enough to use it?

Plus it gives me the chance to pay back for all the kindness & encouragement that UKS has shown me.

I designed it using Design Master so it is in GRA format but I can make a PDF file if anyone can use that instead.

Hope I have done this correctly!


Hilary xxx

Converted to GSD by SHARICA

[minky93]

Hiya!

This is my Third Card again designed in Design Master and is in GRA format.

I can make a PDF file if anyone wants that!

Hilary xx

converted to GSD by Lucille

[Angel13]

Hi All

Saw demo of this technique so this is a cutters version, hope you can all use.

I understand that when this file is downloaded the snowflakes do not appear as displayed, the font that I used is called
lp snowflakes from the dafont.com website

[silverst170]

For the season that will soon be upon us.........
A framed Christmas Tree that has layers for that 3d look with Reindeer's overlooking.
I have cut from perfumed card and decorated with Liquid pearls

You can find it here (http://forevermemoriesforyou.co.uk/Shop/index.php?main_page=products_new)


Thanks for looking

[DJG]

Not sure about this one



Oops! sorry Tina just seen that you've already done a christmas tree lattice

[silverst170]

Another for the Christmas season that will soon be upon us

you can find it here (http://forevermemoriesforyou.co.uk/Shop/index.php?main_page=advanced_search_result&search_in_description=1&keyword=poinsettia+door+card)


:thanks: for looking

[fimcc4168]

Taking your lead Lucille, I looked at your tut for swirls and had a go combining them into a lattice. One ideas makes a quick Christmas card, but this is easily adapted to suit different tastes. Hope you like it. I have included both templates for GSD and GRA.

Fifsxxx

[DJG]

Another popup if anyone can use it. The font is bauhaus 93

[minky93]

Hi! GSD File Added

Another Christmas one this one has taken me ages to design.

It is meant to be in the shape of a present. With two sprigs holly and a lace design as well (first lace design I have done)

I used some old cardstock to do a test cut & thought it turned out to be quite effective. Orange card with a lemon/yellow backing card.

I have tried to do a gsd file but the lace didn't turn out so well, so I have attached the jpg's to see if anyone else can do them?? Just when I thought I had mastered the conversion grrrr!:(

Hope you all like it...... :) Managed to create a reasonable GSD File, had to break the design up into sections, then convert the sections and rebuild the design. Hope it is worth it & cuts okay? Please let me know if it doesn't...
thanks:

Hilary xx

[sugar n spice]

its been a while since I posted but I have been sooo busy with wedding stationery this is something I found in my file while looking for something else.:unsure:

[sugar n spice]

another I found while looking elsewhere in my file made this for last christmas!!!!!!!!!<_<

[silverst170]

One more for Chirstmas........
A Bauble frame with poinsettia's Inside and more for you to layer


you can find it here (http://forevermemoriesforyou.co.uk/Shop/index.php?main_page=product_info&cPath=2_17&products_id=443)




Thank you for looking

[silverst170]

Another one for Christmas and It is coming and won't be long either:lol:


you can see it here (http://forevermemoriesforyou.co.uk/Shop/index.php?main_page=product_info&cPath=2_17&products_id=459)


Thank You for looking

[silverst170]

Another Christmas one, Just a little bit to cut on this one you mainly use the pen tool


here (http://forevermemoriesforyou.co.uk/Shop/index.php?main_page=product_info&cPath=2_17&products_id=460)

[silverst170]

Well this is another for that wonderful season comming soon
Reindeer Door Card comes with a big present inside and a box to put it in.

you can find it here (http://forevermemoriesforyou.co.uk/Shop/index.php?main_page=products_new)


:thanks: for looking

[sugerplum]

hi had a play and did this in robomaster haven't yet cut it as i'm off to work no but thought i'd put it on. Don't know if it's any good or not. As this is my first time of posting a file i hope it works.. Fngers crossed here goes!!!!!

Sorry not sure on how to do screen shots Please take a look and let me know what you think

[hazel7797]

Thought I'd better make a start for Christmas! HERE (http://www.crafty-cuts.com/christmas.htm)

Hazel xx

[sugerplum]

Thanks once again lucille. i have posted two files here which i've made the first is the christmas tree latice which was done first in inkscape then dxf over to robo master plus two toppers i have made with this lattice made in inkscape then dxf over. Warning i have not cut themyet so i hope they wil be ok. I"m going to do a screenshot never done it before so hope it works
Sorry the first file was too big apperently i will have to learn how to zip Oh dear yet aother thing to learn. sceeen shot i don't think has worked either but up loaded jpeg image i hope!!!

[silverst170]

Another card template for Christmas........ Consists of 8 templates Including the box.
Adorned once again with lattice and the Christmas Theme All ties together with ribbon.

you can find it here (http://forevermemoriesforyou.co.uk/Shop/index.php?main_page=products_new)


Thank You for looking

[silverst170]

Another for the comming season you can view it here (http://forevermemoriesforyou.co.uk/Shop/index.php?main_page=products_new) Has extra trees with lattice for you to layer


thank you for looking:love:

[silverst170]

Christmas is definatly comming, Sorry for the poor quality Photo.
Has enough room on the front for your own embellishments.

You can find this one here (http://forevermemoriesforyou.co.uk/Shop/index.php?main_page=product_info&cPath=2_17&products_id=471)


:thanks: For Looking

[LesleyN]

Thanks for the challenge, frogzone. My template is a pop-up xmas tree card. The pop-up fits inside a 144x144 mm (5 3/4 x 5 3/4 in) card. The GSD file is made using Robomaster Vs. 4.4.

[silverst170]

another for Christmas still room for you own embellishments

Personal use only please But you may sell your cards

[Fuschia]

Hi

This should be exactly A5 in size.

Hope its ok and can be of use to some. :)

Font used WWFlakes - available as a free download

[Shirley Anne]

A snowman and his girlfriend under the mistletoe. You can find them here (http://www.shirleyscards.co.uk/Christmas _cards_CR.html)

Shirley

[silverst170]

Made with the challenge Font hope it's ok :)

[DJG]

May be of use to someone

[Shirley Anne]

Christmas Town Topper and backing paper. You can find it here (http://www.shirleyscards.co.uk/Christmas _cards_CR.html)

[silverst170]

A sweet little snowman card with extra's to layer, it is quite an old template But proving very popular as we are getting nearer to Chirstmas.


you can see it here (http://forevermemoriesforyou.co.uk/Shop/index.php?main_page=advanced_search_result&search_in_description=1&*****=98bf9ac3aea1d1ac3670cc0c32ac386a&keyword=snowman)



:thanks: for looking

[sugar n spice]

so after the discussion I don't know what to call this one then except its NOT an insert ........... a pop out card possibly ;)

[Myra]

Hi,
I don't think I've grasped this pop-up exercise and had problems with the Challenge download so used one on my PC. It's a bit of a tricky one to cut out but I got there in the end after a lot of messed up card.

The font was LUCIDA CALLIGRAPHY ITALIC

[Wishful Thinking]

Hi Sue,

Great idea for the challenge. A pop up card is something I have never made before. Thank you for the inspiration and instructions. The know-how will come in very useful. I distorted the Challenge font so you may not recognise it!

[Fuschia]

Not very creative, but I've finally done a pop up (I think). Hope its ok. :)

[ErikaP]

I thought I'd have a go at this month's challenge. Having been away from home for so long, this is my first opportunity to take part in one.

There are 2 offerings, both with pop-up edges. The baby one is very basic. The Christmas one has been done as a pop-up, pop-over, that's pop-over as in wrap, not as in pudding or tart, (tart as in cake).

I did it this way because the cut away lower edge won't be strong enough to support the finished card. Just cut a piece of suitable card to place the wrap over and glue in place. (Ignore the letter I which isn't stuck down properly, I only noticed it when the sun created the shadow from it.)

It also means you can use thicker embossed or glitter card as the base.

Both are DL size when finished.

Hope you like.

Erikap

[Shirley Anne]

My first ever challenge - this is my effort

Shirley

[ErikaP]

Hi,

Been playing again. This one was done as a Challenge template.

I've done it as a "wrap/pop-over", which means you can cut it in a lighter weight card and mount it over a different colour, I also designed the angel. I coloured her using water colour crayons and cut her out by hand leaving a very fine border. (I've never come to terms with print and cut.)

The outline is there purely for size, so you can ensure the one you print and colour will fit the space. To get the angel, click the thumbnail then right click the image and save onto your computer.

Hope you like.

ErikaP

[sugar n spice]

I know Erika did a fantastic 'let it snow'.

[sugar n spice]

Nothing on the TV so in my 'sulking room' (according to my hubby) - craft room to the initiated.

[Caroluk]

Well here is my challenge result.
I changed my mind about the dove of peace as I could not make up my mind on what colour's to use and made this simple C6 card instead, not very fancy I know but I had fun doing it :)

Sadly, the glittering does not show up very well but it sparkles nicely.............promise !

[cherrybabs2005]

Hi
Not having much time to craft, yesterday i thought NO housework,i gonna have a craft day & came up with this 1 i thought i'd share with you all..x

[silverst170]

A front door shaped card with a christmas wreath, Yes its another Christmas template:lol::lol:

You can see it here (http://forevermemoriesforyou.co.uk/Shop/index.php?main_page=products_new&*****=b2d7302f739bd239179b3cfed1fe40b6)


:thanks::thanks:

[silverst170]

Another for Christmas this one is a door card comes complete with a box template too.
I have done in Pink and white perfumed card
You can see it here (http://forevermemoriesforyou.co.uk/Shop/index.php?main_page=advanced_search_result&search_in_description=1&*****=abf4daa015cfe556a5f5482c8efd420c&keyword=posh+christmas)

[hazel7797]

At last . . . I finally got round to doing another Christmas card! I'm slow to get going this year! :rolleyes:

You will find it HERE (http://www.crafty-cuts.com/christmas.htm)

:thanks: for looking.
Hazel xx

[2magpies]

.
This challenge entry is a print and cut Christmas card with decoupage holly leaves. It was drawn and ‘painted’ in Inkscape, and incorporates the stripe, wavy line and polka dots patterns available in the Fill menu. The font is Challenge. :)
.
Search words: Christmas, Holly, Challenge

[Shirley Anne]

I seem to be obsessed with Christmas cards at the moment - can't get much inspiration for anything else. You can find this one here (http://www.shirleyscards.co.uk/Christmas _cards_CR.html)

Shirley

[Anne-Marie]

Here my first attempt making a file. Planning on using this as a present for my mother (including cards of course)!

Regards,
Anne-Marie :wub:

[jeffbond]

Made this tonight.. starting late on my christmas cards, not enough hours in the day :wacko:!! and the ones I did manage to cut the kids pinched because they have been making theirs today too. I hope it is useful to some one. Sharon

[DavidH]

Hope somebody like this one - inspred by Erika

screen shot provided by Lucille

[DavidH]

e - inspired by Erika!! Hope somebody likes it

screen shot provided by Lucille

[papya]

Here is mine been playing coz i am still not well. and can't sleep :angry:

P

I haven't made the card yet but will try tomorrow

[silverst170]

MMM well this is the first of the Pop ups I have managed to conquer :P

Only basic But I quite like it


you can find it here (http://forevermemoriesforyou.co.uk/Shop/index.php?main_page=products_new)

There is still plenty of room on the front of the card for you own embellishments and sentiments, This is a card Not an insert.

[joolse]

Hi I have made these pyrimage sheets for christmas to share with you all
I haven't managed to do the print & cut but all you clever people will manage


Joolse

[DJG]

Maybe someone will be able to use it

[silverst170]

Yes that's right 20 newly made Christmas Templates,
Just some of the pictures below as I can only upload so many.

Bargain considering I charge 2.25 for one singe card tempate.

Hope you like:D

you can find them here (http://forevermemoriesforyou.co.uk/Shop/index.php?main_page=product_info&cPath=2_17&products_id=498)





Thank you

[ErikaP]

Here's another pop-up for the Christmas Season.

Santa and his sleigh swooping over the rooftops. It's taken a while to get right as it is quite delicate. Add some glamour dust for a frosty sparkle.

It's on my website in the Christmas section.

Erikap

[Shirley Anne]

Cute penguin card - well I think he's cute !! You can find him here (http://www.shirleyscards.co.uk/Christmas%20_cards_CR.html)

Shirley

[DJG]

Can either be cut out of the card or cut seperately and stuck on

[ErikaP]

The stockings were hung by the fireplace with care.

A living room at Christmas, leaves itself open to lots of decorating if you like.

Thanks for looking


ErikaP

[ErikaP]

A lovely elegant pop-up for baby's first Christmas.

The peeking teddy is included.

Thanks for looking.

ErikaP

[ErikaP]

Hi All,

I'm sure a lot of us have friends and family with a baby. I needed to design a card for my 5 month old grandson who will celebrate his first Christmas this year.

This is one of the designs I came up with. I put a pair of mittens on the front, but you can add any embellishment you like.

Enjoy

ErikaP

(I'm off to the UK next Sunday to see the family, here's Ben the last time I saw him 7 weeks ago.)

Font used Story Book

[DJG]

May be useful if anyone is still making their cards

[hazel7797]

Finally . . . another Christmas one . . . been slow with the inspiration for the Christmas ones, lost my Mojo :( Anyway, you can find it HERE (http://www.crafty-cuts.com/christmas.htm)

:thanks: for looking!
Hazel xx

[Shirley Anne]

I think I've fprgotten how to do anything else but Christmas cards !! You can find my little Rudoph here (http://www.shirleyscards.co.uk/Christmas%20_cards_CR.html)

Shirley

[silverst170]

A little card for you

[sugar n spice]

I cut this in silver vinyl and stuck it on to acetate.
Incidentally I also used lifting tape to lift the ‘waste’ then stick that onto coloured card to give me extra baubles for a different card. :P

[sugar n spice]

It occurred to me that I could make my dangle snowflake into a 3D dangle. ;) <_< ;)

[silverst170]

Another for Christmas........ I am trying to do other's But It's just christmas at the moment coming in to my head :P


Hope you like it

You can see it here (http://forevermemoriesforyou.co.uk/Shop/index.php?main_page=products_new)


Thank you for looking

[silverst170]

Another for Christmas............. you can find it here (http://forevermemoriesforyou.co.uk/Shop/index.php?main_page=products_new)


Thank you for looking

[hazel7797]

An angel for Christmas, you will find it HERE (http://http://www.crafty-cuts.com/christmas.htm)

:thanks: for looking!
Hazel xx

[silverst170]

Another for Christmas, If you cut as it is on the template it will give you a full a5 size card you just need to score afterwards

Hope you can use

[Shirley Anne]

You can find him here (http://www.shirleyscards.co.uk/Christmas%20_cards_CR.html)

[Shirley Anne]

You can find it here (http://www.shirleyscards.co.uk/Christmas%20_cards_CR.html)

Shirley

[sugar n spice]

poss my last christmas themed up load ^_^

[silverst170]

This is very delicate to cut I cut from perfumed card on 25 thickness and 5 speed.
You will need to gently lift off the carrier sheet.
Sorry for the screen shot I did cut the card But when taking photo's I forgot this one so please forgive me.


Hope you can use

[Shirley Anne]

This is definitely my last Christmas offering as I am off for a short holiday on Monday in search of a bit of winter sunshine !! This is very quick card to make but looks quite effective made up and I'm sure you'll find better ways to decorate it than I have. It also lays flat for posting The font is Challenge.

Shirley x

[hazel7797]

Finishing off some last minute Christmas templates, one of which, can be found HERE (http://www.crafty-cuts.com/christmas.htm)

Also, some more new free backgrounds up for use with your templates.

:thanks: for looking!

Hazel xx

[hazel7797]

Another Christmas one, you can find it HERE (http://www.crafty-cuts.com/christmas.htm)

:thanks: for looking!
Hazel xx

[hazel7797]

Probably the last Christmas one for this year for me. It could be used for other occasions too though, Birthdays etc., you can find it HERE (http://www.crafty-cuts.com/christmas.htm)

:thanks: for looking!
Hazel xx

[ErikaP]

This is my last Christmas design for this year. Although it doesn't have to be for Christmas, it could be used for other seasons with a bit of imagination.

If you have visited my personal gallery at http://www.thephillipsons.net
you'll understand where the inspiration for this one came from. I designed it to send to our local friends and neighbours.

Basically it's a 3 fold card, I've glittered it and attached it to a backing card that will fit an C6 envelope.

In order to get the maximum length, the document settings are set slightly longer than A4, so make sure when you load the card into Robo, it is set to cut right at the leading edge.

Hope someone can use it.

ErikaP

[silverst170]

Another to the collection :rolleyes: this one I know is early But you never can be early enough can you for Christmas
Cut from varous card....


You can see it here (http://forevermemoriesforyou.co.uk/Shop/index.php?main_page=products_new&*****=095abf8e891e5215c65ee9ff40ba62ea)

As always thank you for looking

http://www.ukscrappers.co.uk/boards/picture.php?albumid=292&pictureid=15071

[scrappy jan]

A shaped edge card using the same design - just needs a bit of embellishment
Hugs
Jan x

[dozeydora]

Thank you everyone for your lovely templates and papers. I feel embarrassed posting this one as it is very inferior to all the others on here, but I just wanted to give something back. xx

[Krewella]

Dont know where i got the idea for this snowgloble;) I hope someone can use it. I have made it in two parts so it will fit on 2xA4 cards.

some little extras ...more maybe coming :rolleyes:

some extras and will post foto of finished template soon....

photo by chicks

[Krewella]

I know I know I am soooo early...I blame C&C blockbuster lol
I love making cards for nearest and dearest but hate the batch making you have to do for people at work and neighbours etc so I decided to come up with a simple design which could be placed on a piece of mirror board and stuck to a card.
For some reason the scan of the gold mirror board has turned black :) and for the paper I used C&C smooth decoupage paper which has turned out to be fantastic for intricate designs like this :)

Hope u like it

The mirror board measurments are 6.5cm by 10 cm

[SylviaF]

This is a variation on the snowflake crhistmas tree in snowflake circle that I posted a few weeks ago. I wanted a card which is quite flat which doesn't need to be posted as a large letter. I was quite pleased with the way this turned out - simple but quite effective! Hope you will be able to find a use for it.

Sylvia x

[silverst170]

Something Special and different for Christmas........... Cut from mirri card for the front and the 3d bell, the back is cut from white perfumed card to show off the detail of the design..

The bell stands as a 3d item with the card and it's adorned with lattice.. Folds flat to send in the box template included....Inside you will have half a 3d tree to assemble as you wish.. and little bells that over hang inside too.

You can see it here and it's included within the sale (http://forevermemoriesforyou.co.uk/Shop/index.php?main_page=product_info&cPath=2_17&products_id=688)As always thank you for looking:wub:


http://www.ukscrappers.co.uk/photopost/data/6719/medium/Christmas_Bell_1.jpg

http://www.ukscrappers.co.uk/photopost/data/500/medium/christmas_bell_2.jpg

[Shirley Anne]

A Church shaped Christmas card but I think the basic shape could be used for weddings etc depending on how it is decorated. You can see it here (http://www.shirleyscards.co.uk/Christmas%20_cards_CR.html)

Shirley

[DJG]

Font = Kristen ITC

Merry Christmas with holly in a circle.
The holly and writing was done with the pen first then the circle was cut out...I've also made the wording and holly on their own to write with the pen and then you can cut them out with a scalloped edge or your nesties

[SylviaF]

Another "flat" card for ease of posting! Very simply done in DM but quite effective, hope it will be of use to someone

NB The centre line should be pounced on the GRA file - dashed on the GSD file.

[Shirley Anne]

A fold back teardrop card for Christmas. I'm going on holiday to Thassos for 2 weeks on Sunday so why I've done a Christmas template today beats me as I should be thinking of sunshine not winter !!

You can find it here (http://www.shirleyscards.co.uk/Christmas%20_cards_CR.html)

Shirley

[silverst170]

Another 3d fronted card, this one is for Christmas. Has the 3d Tree to each side of the doors and opens up to view another tree in the middle with Poinsettia's surrounding the front top of the card. I have included ovals for you to cut and place your sentiment if you don't want a tree inside too. Again Adorned with lattice.
I have cut from perfumed white card and green and red Mirri card. Just A small amount of decoration as it's quite fancy I have only added some gold bead type balls..

You can see it here (http://forevermemoriesforyou.co.uk/Shop/index.php?main_page=product_info&cPath=2_17&products_id=692) and it's in the SALE TOO... Going like hotcakes and not even September yet... :thanks:


http://www.ukscrappers.co.uk/boards/picture.php?albumid=2290&pictureid=18371

http://www.ukscrappers.co.uk/boards/picture.php?albumid=2290&pictureid=18372

[ltgrandma]

For all you super organized ladies, who are getting ready for Christmas
already. :o

After seeing all those new Christmas files, I started to feel the spirit

The font I used is Harrington.

[silverst170]

I saw something similar in on eof my books so here's my version...

I think it's pretty in Pink :D I have also used the cuttlebug folders on the top and the bottom layers


Also SVG for Cricut user's:D

[Fuschia]

Beautiful design Angela - TFS. x

Here's my offering to this months challenge.:)

Font is Rockwell extra bold.

p.s. not a very good pic, but you get the idea.

[silverst170]

A special one for Christmas, has a 3d angel to the front of the card and inside is the Christmas Bell with Holly and a poinsettia...

Designed in inkscape so is available as SVG TOO for Cricut user's with Scal. I have cut from Pefumed card and gold mirri card...

You can find it here (http://forevermemoriesforyou.co.uk/Shop/index.php?main_page=product_info&cPath=2_17&products_id=702) and as always Thank you for taking the time to view....




http://www.ukscrappers.co.uk/boards/picture.php?albumid=2290&pictureid=18553

http://www.ukscrappers.co.uk/boards/picture.php?albumid=2290&pictureid=18552

[DJG]

I've cut this and it's fine but be careful when taking out the swirls as its a bit fiddley
Don't forget to check that the centre line is dashed

[Shirley Anne]

A step style card featuring little waving snowmen. There is an optional print and cut file for the faces or if preferred you can create your own features.

You can see it here (http://www.shirleyscards.co.uk/Christmas%20_cards_CR.html)

Thanks for looking

Shirley

[Shirley Anne]

Not long been back from holiday so am only just catching up with everything but the files for this months challenge are all lovely so thank you everyone. My effort is a bit ordinary but I've been busy with washing and ironing so not had a lot of time to spare !! It's a fold back card but the bauble can be used on it's own as a topper if you don't want to make the card.

Shirley

[Shirley Anne]

Not sure how to describe this really but the bell part sort of swivels. You can see it here (http://www.shirleyscards.co.uk/Christmas%20_cards%201_CR.html)

Thank you for looking

Shirley

[silverst170]

Another for the coming season which is nearly upon us :o yes it's now the middle of September so Christmas won't be long...

I have designed this in inkscape But Jan my lovely creative team member has cut and assembled for me..Thank you Jan ...:D

Has 3d Christmas Candle front with holly to decorate..:D

You can see it here (http://forevermemoriesforyou.co.uk/Shop/index.php?main_page=product_info&cPath=2_17&products_id=709) and as always :thanks: for looking





http://www.ukscrappers.co.uk/boards/picture.php?albumid=292&pictureid=18820

[DJG]

Cuts fine if anyone would like it

[Shirley Anne]

This is a 180 degree popup card featuring a snowman with Christmas trees behind him.Topper for front of card included You can see it here (http://www.shirleyscards.co.uk/Christmas%20_cards%201_CR.html) Also available in SVG format.

Thank you for looking

Shirley

[Shirley Anne]

A gatefold card which opens to reveal a layered Christmas tree. You can see it here (http://www.shirleyscards.co.uk/Christmas%20_cards%201_CR.html) Also available in SVG format

Thank you for looking

Shirley

[silverst170]

Well here is something for the children to do for Christmas I think.... I have cut from 250gsm mirri card on pink cap and 29 thickness 10 speed..

Every piece if the template is grouped together but you will have to separate all of them to cut unless you make smaller and can get all on one page.. I don't do small sorry :lol::lol:

Hope you can use

[silverst170]

This is the new kid on the block and another to the Door Collection :lol: But another for Christmas and it's coming quickly now only about 7 weeks to go............

Designed in inkscape and cut on craft Robo, However I can't take the credit for cutting and assembling that must go to Jan for her superb work..
Available now as GSD but will later be available in SVG,AI,WPC and KNK

You can get your's here (http://forevermemoriesforyou.co.uk/Shop/index.php?main_page=products_new&*****=a0f826a75ac9469d03a7bb0d39ac56f4)

As always Thank You for looking!!


http://www.ukscrappers.co.uk/boards/picture.php?albumid=292&pictureid=19235

[Shirley Anne]

Wasn't quite sure what to call this as I started out to make a Fairy but I think she looks more like an Angel - still I don't suppose it matters !! When put together if you tap on the wings she will rock from side to side. There is an optional print and cut file for the face and hair or you can do your own. I put the backing for the wings though my Zyron then stuck the filigree wings on top and sprinkled with Glamour dust. I cut the filigree wings from 160 gms card but the rest is cut from thickish card probably about 230 -250 gms.

Shirley

[DJG]

Made with upsidedown hearts. Read about something similar on the net. Not cut but should be ok

[DJG]

A quick simple card, I haven't cut it but it should be fine

[Shirley Anne]

A scalloped pop up candle card with dripping wax effect and layered poinsettias. You can see it here (http://www.shirleyscards.co.uk/Christmas%20_cards%201_CR.html). Also available in svg format.

Thank you for looking

Shirley

[sugar n spice]

simple card for the children to decorate :lol:

[sugar n spice]

simple card for the children to decorate - buttons for the eyes?? :huh:

[sugar n spice]

one for the children to decorate - or you could use as place setting card and use real holly.

[sugar n spice]

last one again great for the children to decorate.

[Shirley Anne]

A fireplace card with presents and stockings. The fire effect backing paper is also included. Available in bothe GSD and SVG formats. You can see it here (http://www.shirleyscards.co.uk/Christmas%20_cards%201_CR.html)

Shirley

[cottons1]

Spring up Merry Christmas.Font Is Porkys

[cottons1]

Spring up Seasons Greetings.The Font is porkys.

[cottons1]

Last one. Spring up Christmas Wishes.The Font is Porkys

[Shirley Anne]

Lovely files everyone - thank you. Not been in here for a while as I have been busy moving all my stuff to my new PC but have just done this letter type card for the challenge.

Shirley

[DJG]

Simple pop up card...cuts fine...font is KristenITC

[Lucille]

These wordy spring cards of Sue's are a bit addictive, there I was snipping away at my parchment, when this idea popped into my head and I had to try it.

I haven't added all the little triangle bits for the base but I'm sure everyone can draw those.

Created mat with Offset path of the text and welded it to base card

Fonts used are Hobbit SF and wmchristmas 3

[DJG]

I've cut this and it's fine

[DJG]

Christmas wishes card... is Hawaiian Aloha BTN

[etui22]

My challenge to you all in this festive month is - "To create a card/scrapbookpage or decorative item from a Christmas carol or song"
I thought that this would be flexible enough for everyone to create something for Christmas and as we all get busy.

I'll start the ball rolling with "Oh, Little Town Of Bethlehem" - this is a card depicting the silhouette of Bethlehem against the night sky.

Look forward to seeing what you all come up with.

Lin

[sugar n spice]

not even going to tell you the Christmas carol :lol::lol:

[dozyrosy]

I'm cheating as this is a very old template (which was removed when we had our copyright theft problems); it's appropriate and also one of my favourite carols, so here it is again. You will need to create a card or panel around the design as this is left blank on the template. My original version was cut as a panel and attached to an A5 card, and I used a silver pen, silver Mirri mats (I think!), and blank silver peeloffs to create the design.

Details of the fonts used, are included on the template,
and the uploaded version was modified in v5.1 to include copyright info.

Rosemary

[carolgood]

Hiya all hope this one is ok, the lovely Anne, Fuchia helped me get the card level bless her lv Carol...Lucille could you please move it for me supposed to be in Dec challenge Thanks x

[DJG]

TEXT= Hawaiian Aloha BTN....... Cuts Fine

[bendog]

Here is my offering for the challenge.

[silverst170]

Thank you to Jan for cutting and asembling for me as I just haven't had time to do anything lately..

I have made this just from shapes in inkscape.. Surprising what you can make with just shapes.. The sentiment is for the pen tool and the font is Elegant script..

[Wishful Thinking]

For Lillibean (and anyone else of course) just in case you find you need some ready cut.

[DJG]

Cuts fine...if anyone can use it. The font is arial black

[Shirley Anne]

Lovely files ladies thank you. Here's mine - a Rudolph aperture card. It doesn't show in the photo but he really has got a shiny nose !!

[valeriepalmer]

Great files everyone. here's mine winter wonderland

[DJG]

Font=Hawaiian Aloha BTN. I wanted to draw this with the pen but I've mislaid my penholder so I cut it out, it cuts fine.The writing can be done with the pen or cut out and the tree can be an aperture or cut separately an stuck on.

The song (if you haven't) guessed is "Rocking around the Christmas Tree" sung by Brenda Lee

[Fuschia]

A really quick one and nothing fantastic, but I tried, lol :lol:

Font = EastMarket. You may want to write this then you wouldn't lose the inners like I did :lol:

[Ness72]

Haven't cut him yet, but I hope he's fine. I used to love watching the Little Drummer Boy every Christmas, but they don't seem to have it on anymore :( Hope you like him :)

[Caroluk]

Finally, my attempt at the challenge ^_^

As usual I used my favourite subject..........snow which I love.

Sorry about the picture quality, it was scanned so the glitter does not show up and the pearlised card lookes darker than it is in real life, also layered up 3D style which does not show very well.
Wordmat and snowflake cut in 160gsm card.

I have altered the SVG file.

[2magpies]

This card is a tri-fold. The pink lines on the template should be drawn with the pen tool first, before sending the rest to cut. The leaves, pears and partridge are all decoupaged. :comp:

Hope it is useful.

Edited to add that the font used was Edwardian Script ITC

.

[etui22]

Card with arch window opening - I included the black n white bmp for printing onto acetate, also colour version - I glittered mine.

Lin

[silverst170]

I thought this was quite different from the normal Christmas Cards..
Fold the middle then fold over the reindeer front...

Cut on 250gsm pearlescent card pink cap thickness 28 speed 10 :D

Personal use only please:D

[silverst170]

Well this is the first of Many I had on the go but had so much on at home I didn't have time to get them finished..:D So I suppose I will still be finishing Christmas cards in the spring :o

This was designed in Inkscape and cut on craft robo By Jan Connor... And as you can see her work is perfect in everyway..

You can find it here (http://forevermemoriesforyou.co.uk/Shop/index.php?main_page=product_info&cPath=2_17&products_id=745) And as always thank you for looking...

And may I now wish you all a very Happy Christmas and all the very best for 2010..:D


http://www.ukscrappers.co.uk/boards/picture.php?albumid=292&pictureid=20044

[silverst170]

Last one till after Christmas now Sorry have loads to do and not enough time to do it in:lol::lol: But that's just typical..

Personal use only please.. And Happy Christmas to all

[Miranda00]

Hello, I made this Christmas Tree Cards whit the template of Sugar n Spice. Aren't they lovely and they are so easy to make. Thank You Sugar n Spice !