Weddings and Special Couples - Cards and Toppers

[frogzone]

Hi have have just completed this wedding invite reply, you could change the wording and use it as a wedding gift thank you, or even an invite.......

you do need hte font to be able to see it, cant remember where i got it from but will see if i can locate it for you........ its called gabriels angels...

Screen shot added by Lucille

[frogzone]

Hi have have just completed this wedding invite reply, you could change the wording and use it as a wedding gift thank you, or even an invite.......

you do need hte font to be able to see it, cant remember where i got it from but will see if i can locate it for you........ its called gabriels angels...

popup

[etui22]

you will need to snip the end of the card on this one - two cuts and a set of horseshoes to do in lace /glitter paper? - a nice verse on the top right hand courner would look nice on this card I think.
Happy Easter everyone
Etui22

[etui22]

two plain bells on a lattice background, also two lattice bells, one lattice bell and a plain bell.

on seeing this one cut out, I think that if you got rid of the background lattice pattern on the card itself you could put some nice paper there instead.
I curvered the bells and will up-load a proper piccy in my folder tomorrow (sorry, lost got in the way...)

have also done single and double hearts too - do them tommorrow....

[ErikaP]

Hi all,

Not very exciting, but maybe someone can use it.

Just done this for the front of a wedding card. I wanted something quite simple, as the Fairytale Castle is inside.

Erika P

[ErikaP]

Hi all,

Been asked to a wedding card, in landscape. Here it is. The lettering would be lovely for a Golden Wedding as well.
If you use it make sure you do it at a slower speed, about 3 worked for me.

Hope you can use it.

ErikaP

[sugar n spice]

ok its very basic :mellow:but not to bad if you look at it without your glasses :blink:(or after a few glasses!!!!):rolleyes:

cuts beautifully popup

[cordobian]

Hi there, talk about jump in at the deep end for my first template, I must have been mad, it's taken me absolutely ages, I think my grey cells went into meltdown.:wacko::wacko: but wanted to put something back for all the beautiful templates I've downloaded from you very talented ladies. Can anyone tell me why all the fonts on my computer don't come up in the fonts on inkscape, and is there any way of adding additional fonts to Inkscape? Thanks. Hugs Iris xx

[Celia Reed]

The outer card and insert were both cut on 160grm card, red cap, speed 10 and thickness 30 (My robocop has a blue lid). I used silver mirror card to reflect the coach and give depth. Caution! This is extremely delicate and not for the faint hearted. However, it can be done! The filigree is in green as the pattern is complex and my robocop stalls part way through if I try to cut the design in one hit. However this way I can cut the green filigree and then cut the rest of the pattern. The font is "Romantically Yours". Please note if you cut black lines the words will fall out of the card. I set the red dashed line at 0.5mm cut and 1mm space. Fold with care and you will achieve the pop-up.

I have found the best way to remove the card from the carrier sheet is to use a finely pointed scalpel (or similar) and pick and flick out all the cut-outs from the design, then lift the design very gently with a slender cranked palate knife.

Celia

[Creationsbyjess]

Managed to create these symbols which mean life, health and strength for an egyptian themed card I made. Hope someone might use them in future. card didnt scan well, but cut the symbols into brown bazzill and mounted onto gold mirri so the gold shone through well

[silverst170]

Sorry I pressed button before I added the picture


here it is (http://forevermemoriesforyou.co.uk/Shop/index.php?main_page=product_info&cPath=2_26&products_id=314)

Tina xx

[silverst170]

A quick one made Thursday you can find it here (http://forevermemoriesforyou.co.uk/Shop/index.php?main_page=product_info&cPath=2_26&products_id=331) Still have 4 to finish so will list later

Thank You


Tina xx

[silverst170]

Well I have been working on this for sometime now I feel its ready for posting.
I have used cuttlebug swiss dots behind the wedding arch, I have also designed a lovely box for the Door card range now and you can cut the front in acetate so people can see the card instead of hiding it.
The doors on the church open, to give you a sneaky peek at whats inside


You can find it here (http://forevermemoriesforyou.co.uk/Shop/index.php?main_page=product_info&cPath=2_26&products_id=366)

Thank you for looking

[silverst170]

This is really Special for that special couple. Has little doors on the back for your sentiment

you can find it here (http://forevermemoriesforyou.co.uk/Shop/index.php?main_page=advanced_search_result&search_in_description=1&keyword=summer+wedding) and if you would like to leave a comment please do so here (http://www.ukscrappers.co.uk/photopost/showgallery.php?cat=6719)


Thank You for looking

[sugar n spice]

partner to the engegement card
the font is scriptina

[sugar n spice]

last one

after some fiddling this is (I hope) :mellow: a 2.4 version of the wedding card I uploaded, picture of finished card is on the other thread.

[silverst170]

This is in Honour of my Darling Daughter Sarah who gets married on 2nd of September 2008 in Disney World Florida.

I do hope you like it

You can find it here (http://forevermemoriesforyou.co.uk/Shop/index.php?main_page=product_info&cPath=2_55&products_id=465)


Thank You For Looking

[silverst170]

Adorned with lattice and with the wedding theme........
An array of 8 templates Including a box to make this special Wedding Card for the Special Couple

You can find it here (http://forevermemoriesforyou.co.uk/Shop/index.php?main_page=product_info&cPath=2_26&products_id=472)


:thanks: for looking

[silverst170]

One for congratulations here........ you can have two names to the top of the card and the initials in the glasses .

YOU CAN FIND IT HERE (http://forevermemoriesforyou.co.uk/Shop/index.php?main_page=product_info&cPath=2_18&products_id=477)

[silverst170]

Beautiful Bride within a frame with a trailing bouquet and flower's to layer.

you can find it here (http://forevermemoriesforyou.co.uk/Shop/index.php?main_page=product_info&cPath=2_26&products_id=476)


:thanks: for looking

[silverst170]

A small beauty for Weddings............... I have cut from pink and white perfumed card, and used devine swirl embossing folder to the back of the card for some texture.
Adorned again with Lattice and Bows...............

You can view it here (http://forevermemoriesforyou.co.uk/Shop/index.php?main_page=product_info&cPath=2_12&products_id=552)



Thank You for looking

[rugersmum]

Hi
Simple Lattice card with 3D Wedding Cake topper I just put the layers of my cake through cuttlebug but this could be decorated in many ways

It is avaiable HERE (http://www.keepsakes-by-design.com/wedding.html)

thanks for taking a peek

[silverst170]

I am sure some of you have Weddings to go to this year!! And would like to give a card that's Special?

This is again cut from perfumed card and I have used cuttlebug embossing folder Swiss Dots.
It has the 3d effect inside the card as well as outside. Hope you like it

Comes with Box template too.....:love:

You can see it here (http://forevermemoriesforyou.co.uk/Shop/index.php?main_page=products_new)


Thank you again for looking.....

[silverst170]

This is slightly Different inside it has a Latticed arch with bride and groom, The arch is 3d and will need assembling before you attach to the main pice of the card.
If you have brought any other of my door cards then you will know that the box fits all........ Well all except this one :wub: as it has more depth than the rest, So I should think you will have to cut by hand to get the box to fit. I will include the box template But you will have to adjust.
Cut from perfumed card and decorated with vines and Mulberry rosies.

You can see it here (http://forevermemoriesforyou.co.uk/Shop/index.php?main_page=product_info&cPath=2_26&products_id=572)

Thank You for looking

[melking]

This was fun to do, It's based on the idea of a horseshoe, as best as I could get mucking around with the circle and square, and I made the heart from scratch in inkscape as well :D I'm learning, that's for sure! Great tutorial :thanks: I haven't cut it, I hope it's OK, the font was (can't blinking well remember!) just as well inkscape does :lol: Copperplate gothic bold. I think it's a standard windows font.

[silverst170]

Firstly I would like to personally Thank Jan (Janico) for cutting and decorating. She has done the most wonderful job.......:D
This is obvously for Weddings It does have a box But will fold flat into a a5 size envelope if you so wish.
It is a door card But with a twist is also has the concertina idea too, For it to be folded, Has 4 layers.
Jan has cut from Conqueror card and used her own embellishments. This is really special and who wouldn't want to receive this?

You can find it here (http://forevermemoriesforyou.co.uk/Shop/index.php?main_page=products_new)



:thanks: For Looking :D

[silverst170]

This can be used as a Wedding Card or Just Married, what ever floats your boat. :D
Scalloped Edges and layers if you so wish to use. A old Fashioned Car 3d effect and of course the Bride and Groom. Cut from perfumed card for the main part and A kind of Glitter card for the rest which is just lovely to cut. The Outer cover I have hot foiled with the sentiment Just married But you can Just write this is you wanted.
All 3 Dimensional once again

Available in AI, GSD,WPC,KNK SVG and SCUT file formats if you have a cricut machine

You can find it here (http://forevermemoriesforyou.co.uk/Shop/index.php?main_page=products_new&*****=cc7c890cff416f9979cdb94eca6cea4b)

As always thank you for looking

http://www.ukscrappers.co.uk/boards/picture.php?albumid=292&pictureid=15031




http://www.ukscrappers.co.uk/boards/picture.php?albumid=292&pictureid=15032

[silverst170]

Another to the collection :rolleyes: this one is for weddings and what a card it is too. Infact the back of the card in the photo is plain But I have since added some beautiful Lattice to make it really special.
You will need a box to send it will not fold down flat, well the bride and groom won't :lol::lol:

The Bride & Groom each have their own podium which will swing if the card moves or you push them But not too hard :lol::lol: Just incase they fall off :lol: Only joking..........You will have to secure them tightly.

You can find it here (http://forevermemoriesforyou.co.uk/Shop/index.php?main_page=products_new) And always Thank you for looking......


http://www.ukscrappers.co.uk/boards/picture.php?albumid=2290&pictureid=16981

[hazel7797]

This is the closest I will get to 3D :lol: (I can't envisage what a 3D object will look like 'flattened out') :lol::lol: It consists of 4 layers and some 'bows'. For the summer brides. You can find it HERE (http://www.crafty-cuts.com/wedding.htm)

:thanks: for looking!
Hazel xx

[DJG]

Thought I'd start the ball rolling with two similar horse shoe cards

[Fuschia]

Started this weeks ago, this was the perfect excuse to finally get it finished. :)

p.s. Font for words is Antsypants.

[JunieA]

Sharon, Ann & Doreen those are beautiful, :thanks:

Here is my creation. I spent all day yesterday fighting with various software trying to get it right. For some reason my DM weld feature wouldn't work properly:angry:. I still don't know why it eventually did do as it was told. :huh:

I have cut it in DM and it cut fine but my camera is kaput at the moment, so screenshot only for now. The font used for the monogram is just a system font Edwardian Script which I did with the Pen tool.

I have only uploaded RM5.1 version but if anyone wants DM version I'll put it on, just its on my other pc.I have converted it to RM thru Inkscape. I do hope you like it after the tears of frustration.
:thanks:

[JunieA]

Thank you for your comments, I should have waited til today as its working perfectly. While I was trying to work out why it wouldn't work I came up with this little apperture card. I made it as an A6 card but you could alter it to suit. Its cut lovely in DS but again I have converted it to RM5.1.

Hope someone can use it.

[JunieA]

Last one before I go to work. I wanted to try the old way of welding in RoboMaster (flood filling with black and then doing a screenshot, saving as a JPEG then auto tracing in RM) and ended up with this simple apperture card.
I have cut it and its fine.
DS & Future DIL will have loads to choose from by the end of this month!!

Have a great weekend

[garw]

Beautiful files THank you to all... Well I actually got there at last & made a template..just have to figure out how to upload ithere goes...:D

Petrina these are fabulous im going to a wedding at the end of the month and now im spoilt for choice thanks for sharing

converted to GSD by Lucille

[Shirley Anne]

My contibution is a 180 degree popup. Hope this works OK as I've not uploaded a zipped file before !!

Shirley

[silverst170]

A single Dove sits on the middle of the scalloped heart and swings with every movement of the card.........Looks very elegant I think cut in pearlised pale pink card with white trimmings. I have also embossed the layer's on the Doves with swiss dots folder (My Fav:lol:).
I haven't added a lot of decoration as it seems to be quite fancy already... with all the scallops and lattice work.

You can see it here (http://forevermemoriesforyou.co.uk/Shop/index.php?main_page=product_info&cPath=2_92&products_id=646) And as always Thank You for looking.......

http://www.ukscrappers.co.uk/boards/picture.php?albumid=2290&pictureid=17150

[pkcase]

Stands by itself, folds flat to mail.

Pics show front and back of the card.

[pkcase]

Bride and Groom. Card folds flat to mail.

Font is Porcelain.

[Ness72]

Here's my contribution to July's Challenge. I have yet to cut it, but fingers crossed it's fine. Been I while since I've posted anything as I wasn't able to access the site for a couple of months, which just about killed me! Hope you all have a great day xx

[dozyrosy]

My take on the challenge - I'd been thinking about doing this since Marion posted the link to this popup card (http://www.youtube.com/watch?v=RlQnyei1GfU) on You Tube. However I was a bit reluctant to post my template since I've discovered Shirley Anne has also made a lovely popup card, but it's a different mechanism so decided I could.

Photo is a prototype made in ATC size; the actual uploaded template is a slightly modified and enlarged version as some parts were quite fragile. Instructions are included on template. Created entirely in Robo Master and cut on CC330 from a beautiful cream/gold double sided pearlescent card. It really needs double sided card in two contrasting colours to work best though.

Rosemary

[ltgrandma]

I just couldn't get a good picture of the colors in this card. The picture
doesn't do the the colors justice. It is a pretty cream with a copper background.
Oh well. I did finally complete my Jully challenge.

[Holmes-made]

Been meaning to post - then thought I had left it too late, but as Lucille said there is no excuse....

I have posted the template for this pop-up card but as you can see it is no use to anyone now, but at least you can see the 'design' construction which can so easily be modified for special wedding anniversary cards.

The font is Black Chancery

Sue

[silverst170]

One For Weddings, This one is quite special as the dress opens up before you open the card, and also folds for sending in the box also included within the template... To close the card you can thread ribbon through the holes to make it look like a corset then tie with a bow, Full of beautiful Lattice too....

I have cut from Peach perfumed card and trimmed with white..

You can see it here (http://forevermemoriesforyou.co.uk/Shop/index.php?main_page=product_info&cPath=2_26&products_id=687) And it's in the Sale :thanks: for looking


http://www.ukscrappers.co.uk/photopost/data/500/medium/wedding_dress_1.jpg

[silverst170]

Very similar to the Christmas bell door But this is for weddings inside you will find a horseshoe for you to decorate.. Plenty of space for your sentiments too... There are small Bells either side that will just fold over and hang inside...
I have designed this But Jan one of my team member's cut and assembled for me and she has done a beautiful job too... Lovely colours Cream and Burgandy which is wedding colours for some....:thanks: Jan


You can find it here (http://forevermemoriesforyou.co.uk/Shop/index.php?main_page=product_info&cPath=2_26&products_id=689) And as always Thank you for looking... Also available as SVG for all Cricut user's.

http://www.ukscrappers.co.uk/boards/picture.php?albumid=2290&pictureid=18084

http://www.ukscrappers.co.uk/boards/picture.php?albumid=2290&pictureid=18085

[silverst170]

Now these could be used for Wedding Invites or Wedding table place mats. Or Hen night/ Stag night invites..

Both cards are freestanding and you could add your sentiments to either the back or the inside of both cards.

You can find them here as a set (http://forevermemoriesforyou.co.uk/Shop/index.php?main_page=product_info&cPath=2_26&products_id=691)And they are in The Template SALE....

:thanks: fOR LOOKING

http://www.ukscrappers.co.uk/photopost/data/6719/medium/tux_and_dress_1.jpg

[silverst170]

I Designed this for my friends wedding we attended yesterday.... It is delicate so becareful taking off carrier.. I also hot foiled their names onto the card.

Personal use only please

[silverst170]

On for weddings here, I know it should be Christmas Cards but I had this one on the go and had to finish it so here it is :lol::lol: It is really nice made up..

Designed in inkscape and cut on craft ROBO i have cut from perfumed card and only added a little decoration. I think it is fancy enough don't you?

You can find it here (http://forevermemoriesforyou.co.uk/Shop/index.php?main_page=product_info&cPath=2_26&products_id=718) And as always Thank You for looking...


http://www.ukscrappers.co.uk/boards/picture.php?albumid=292&pictureid=19140



http://www.ukscrappers.co.uk/boards/picture.php?albumid=292&pictureid=19138