Mum/Mothers Day & Grandma Cards & Toppers

[susibi]

This is the idea - prox A6 size card. Un group, delete the letters and save as an A6 blank template .
Make a normal monogram in Inkscape import to CR then delete the outer frame.
This will cut your letter as part of the card
HTH
susibi

[Robyn]

First upload. Wonder if it will reach you! Stressed , Dozyrosie and Subisu held my hand throughout this one! I have left a compilation of instructions on Chat. A handy technique I think!

Have had another go at uploading!

[mysticclare]

I'm sure someone else has done this before, but hey, I couldn't find it and maybe it'll be useful!

[dozyrosy]

I've done some mother's day cards for my fundraising efforts this weekend - the first time I've done anything other that dog related cards for this effort, so I hope they'll sell! here's my template for a slightly plain looking card with a welded "mother" down the side - but it can be dressed up to suit. I made it for the Pro and two cards will fit on a slightly larger than A4 sheet portrait, but have modified template for baby CR users. Font is cooper black. I'd appreciate any comments on the purple version as it didn't quite turn out as intended and I don't know whether to love or hate it!! :love: :nono: :love:

Rosemary

[Clare33]

Here is another variation of the Mum word edge card - this one is quite large and fits an A5 size envelope. Just take each individual letter page and cut on a separate sheet of A4 card.

[my5kids]

A Mothers day card for the Nans in your life

[my5kids]

for the Mor's in your life (my mother-in-law is Danish, not me ^_^ )

[ErikaP]

Hi, I've been asked to to do a mum version of the dad one I potsed yesterday.

ErikaP

[ErikaP]

I've been asked to post this one. The box is the DL one I posted some time ago.

ErikaP

[Loopylass]

Here's my first template. It's a .GRA file but PM me if you want me to convert it to .GSD

The bottom is slightly flattened so the card doesn't roll over.

Hope it's useful for someone.

Here we go - here's the .GSD conversion. I hope they cut ok - the lettering doesn't seem to have come out brilliantly in the conversion unfortunately :(

[christine mckie]

all of the card and decoration have been designed and cut on the craft robo
letters have been glittered using ultra fine flowers and leaves have been cut using pearlescent paper. I have not included the flowers and leaves as I am not sure if they have been done before.

[Dempsey toppers]

I hope this is worthy :) I am trying to get to grips with Corel 12 and so far this is my best attempt!

Screen shot curtesy of Sue Bailey

[Chris20]

I made this template so that I could practice uploading. Might be OK for someone.

[ErikaP]

Hi

I was going to save this for Just Cutters CD2, but since Mother's day is so early this year, I thought I'd share it on here instead.

It's a delicate template, so be careful what card weight you use. Keep the cutting speed low and it should be fine.

Hope you like it.

ErikaP

[silverst170]

Well its now gone That Christmas period And now it's back to reality :lol::lol:


Mother's day is just round the Corner So I have started my Designs with that in mind.
I have cut from Lemon perfumed card with a white card backing layer With
3d flower's to the front.
If you open the first lot of doors you then have a second layer to either put your embellishment behind Or you sentiment Both look lovely.

Comes complete with a box too:D

Available in GSD, For other's such as WPC, AI AND KNK FORMAT please contact me as this is a newly made design and I haven't converted as yet.

You can find it here (http://forevermemoriesforyou.co.uk/Shop/index.php?main_page=products_new)


:thanks: for looking and a Happy Healthy Wealthy New Year to all

[jeffbond]

Made this for my children for my mums birthday card
Hope it is useful to somebody,
The font is AdineKimberg-Script

:love: Sharon :love:

[silverst170]

Another for Mother's Day here, Full of Lattice flowers and butterflies.........
I have cut from perfumed card in peach and white, decorated with rhinestones and a scattering of glamour dust.

Feel free to look here (http://forevermemoriesforyou.co.uk/Shop/index.php?main_page=products_new) where you will find it and it's also in the sale.


Thank you For looking

[silverst170]

Mmm Another for Mother's Day here, its very intricate and needs to be cut slowly and also taking off the carrier bit by bit for the front pages.
It has Mother down the front with the letter's alternating on each side along with plenty of swirls and things.
I have cut from perfumed card as it's double sided, Inside is the flower pocket for you to fill with lovely Flower's for Mum, Vines are attached too. I have also embossed the inside with embossing folder's devine swirls and swiss dots.
Please NOTE the Mulberry Roses are NOT included in the price :lol: they are mine


You can find it here (http://forevermemoriesforyou.co.uk/Shop/index.php?main_page=products_new)


Thank You for looking

[silverst170]

Another for Mother's Day. :love:
This is a 3d Fan card with flowers & bows, has the Mother word running through the design. so could be used for other Mother events too.
I have cut from perfumed card white and peach and decorated with red mulberry roses. Also has a stand for you to display and will fold down into a A4 envelope which is not included in the sale.

You can see it here (http://forevermemoriesforyou.co.uk/Shop/index.php?main_page=products_new)

Thank you for looking

[silverst170]

For Mother's Day again this one :) And it will be with us soon the weeks are Just flying by already.
The Inspiration for this card came from one of my very first Templates I made and that was along time ago :P So instead of a topper that I originally made she is now in a card. She is surrounded by swirls and I have added a fan to her hand.

I have cut again from perfumed card White and Lemon, Inside is another set of door's with vines and flowers each side, and when you open up the middle doors there she is in all her glory.

You can find her here (http://forevermemoriesforyou.co.uk/Shop/index.php?main_page=products_new)


:thanks: for looking

[hazel7797]

One for Mother's Day . . . or any day, to tell her how much you care! You can find it HERE (http://www.crafty-cuts.com/formum.htm)

:thanks: for looking!
Hazel xx

[Jill3]

I have done another layered topper, much the same but I tried to use a dingbat and a different font. I realise now the dingbat was not a very good one 'cos it has got those centre bits which would not be much use cut and the R of For is a bit shapeless, but I have changed the cut line colours. But I learned to use the 'flip object vertically' button for the dingbat!

Anyway all comments welcome.... as long as they are nice ones:lol::lol:

Screen shot by 2Magpies

[BUTTERCUP1617]

Well after a really disappointing start to this challenge yesterday, I did not give up - and it worked

Really don't know what happened yesterday, just a bad day I guess, but I got there in the end.

Tracey

p.s font used was antsy pants

[Lucille]

Adaptation of previous fan for Mothers Day. It has 2 layers, there is a stand in Card section under Miscellaneous.

I've used Carols plaid for the front and her matching solid for the back, but I can't link to them at the moment as they are still in the template area.

[BUTTERCUP1617]

Ok, Lucille and Tinas fans got me wandering - WHY CAN I NOT DO THAT, decided to give it go - not very good I know, but am quite pleased with the outcome (my first attempt) more practice and I may have something close to the lovely fans that Lucille and Tine produce. The mat for some reason does not look right, I have not cut it either so don't know what will happen.

Tracey

[Fuschia]

Its my Mum's 70th Birthday in March. I did this topper for her card. It may be of use to someone. :)

Aplogies for screenshot and zip file, it seems it was too big to upload normally.

Fonts used Helena Bold for writing and lpflowers2 for flowers.

[Fuschia]

Done for my Mum for Mother's Day.

This could do for Birthday or Mother's day. Hope someone can use.

Font - FontleroyBrown

[silverst170]

I have made this today for Mother's Day.

It will make a full a5 size card if you cut the lattice exactly where it is on the template screen.
The rest you can arrange where you like, for personal use only please.
Cut from perfumed card, I have also used the swiss dots embossing folder.

Hope it's of some use

[hazel7797]

One for MUM, you can find it HERE (http://www.crafty-cuts.com/formum.htm)

:thanks: for looking!

Hazel xx

[DJG]

I fancied a bit of monochrome so here it is:lol::lol:

[silverst170]

Another one for you..........

If you cut whats on the edge it will cut a a5 size card with MUM apeture, or I have made the topper if you prefer that. :D

[DJG]

Also my last one for tonight. Off to watch " Larkrise to Candleford"

[BUTTERCUP1617]

I had great fun doing this challange, thanks Lucille.

Card not decorated as yet, nothing springing to mind, I really need to do a shop for more embellishments

Font used is Bellbottom.Laser

Tracey

[DJG]

Another one for the challenge, should have said he font is cooper black bt

[silverst170]

Another for you
Font is Mad Font and is free

:D

[silverst170]

Here's another for Mother's Day.

Watch out there's loads of bits to get on the floor and it's very delicate

Fancy edges done in inkscape with the path effects tool, and lattice in knk studio.

Piccys I have put a red piece of card behind so you can see the front as well as inside

Hope you can use (Doreen) :lol::lol:

All you need to do is decorate:D

[2magpies]

A simple folded 'MUM' text card in RM 2.4, hope it is useful. :)

[DJG]

Another card for mum, font is cooper black bt

[Shirley Anne]

Here's my offering -a MUM topper

Shirley

[silverst170]

I was asked to make this for a customer it does have more pattern than you can see ;) But I have decorated with Feather's

Cut from perfumed card and decorated as you wish....

You can see it here (http://forevermemoriesforyou.co.uk/Shop/index.php?main_page=product_info&cPath=2_55&products_id=580)


Thanks for looking

[JunieA]

Another "Mother" file.

forgot to say Font is Soap

[penny123]

This is my Mothersday card hope you like it Jess

[weeadam]

Hi there I agree best to play to get you used to your new machine. Get to learn how to work it and get used to robomaster before trying to master anything else. Have attached a basic mum welded card just done on robomaster if it helps.

It was done by drawing a rectangle. Type a letter one at a time, not all the letters at once, this way you can move them about individulally. Place them where you want then select rectangle and all leters and click weld button as stated earlier you need robomaster 5.1 for this. Hope this is of some help to get you on your merry journey with your Robo.

screen shot added by Lucille

[silverst170]

Yes On the 14th March it's Mother's Day and we like to give our Mums something special on That particular day don't we?

My youngest daughter had her Birthday in January and was given a lovley box with perfume in, and I loved the box so much I have designed my version......And here it is

I have designed this Especially for that Day and for our dear Mums to have something extra special...

You can see it here (http://forevermemoriesforyou.co.uk/Shop/index.php?main_page=product_info&cPath=2_21&products_id=766) And as always Thank You for looking!!

http://www.ukscrappers.co.uk/photopost/data/6719/medium/3.jpg

[silverst170]

It's nearly here again Mother's Day 14th March:)

This is a relist of a card made for Mother's Day last year....

You can find it here (http://forevermemoriesforyou.co.uk/Shop/index.php?main_page=index&cPath=2_21) Along with all the other Special Mother's Day Cards Give something unique this year and made with Love<_<

[silverst170]

Another here for Mother's Day that falls on the 14th March this year..

Also another relist :)

You can find it here (http://forevermemoriesforyou.co.uk/Shop/index.php?main_page=index&cPath=2_21&sort=20a&page=2) Along with all the other Mother's Days cards.... And the SALE is still on

Thanks for looking :)

[silverst170]

Well I just love this for Mother's Day and guess what they don't die!! they will last forever with tender care and love..

I have two versions here for you to see One is cut and asssembled by Jan Connor The bottom picture, which has all the elements in and the other by me with just two elements..

You can purchase here (http://forevermemoriesforyou.co.uk/Shop/index.php?main_page=product_info&cPath=2_12&products_id=769) And always thank you for looking...

http://www.ukscrappers.co.uk/photopost/data/6719/medium/Tina_2.jpg

http://www.ukscrappers.co.uk/photopost/data/500/medium/dafs_011.JPG

[silverst170]

Once again I have designed this with Mother's Day in mind but you could use for get well or any other ladies occasion really.

I have designed in inkscape and exported and retraced in robo master for a quicker cut.. I have cut from perfumed card..

You can see it here (http://forevermemoriesforyou.co.uk/Shop/index.php?main_page=product_info&cPath=2_12&products_id=770) And as always thank you for looking :wub:

http://www.ukscrappers.co.uk/photopost/data/6719/medium/Vase1.jpg

[silverst170]

Another for Mother's Day or really any female occasion... I'd like to personally thank Anne for helping with the name for the template :thanks:
This has a small vase with daffodils and also roses, I have also added iris heads too but not made them up.. But Jan my Special lady will obviously make with all elements so will post picture when she sends to me..

Stands alone open or closed..


You can find it here on my website (http://forevermemoriesforyou.co.uk/Shop/index.php?main_page=product_info&cPath=2_21&products_id=773)As always Thank you for looking..

http://www.ukscrappers.co.uk/photopost/data/6719/Image11.jpg