View Full Version : Envelopes
Lucille
10-07-2005, 06:44 PM
These were traced in CR.
susibi
13-01-2006, 11:12 AM
try this - it is editable so you can adjust the size - the actual size is 6x8 cm
Susibi
isithebe
19-04-2006, 04:48 PM
A mini envelop with a scalloped insert - similar to sizzix
Nina
susibi
18-09-2006, 11:52 PM
simple C6 envie - if you don't want the perforations( red rectangle) first print the template as is on thin card - tear off the sides until you are left with just the centre - this serves as a template for folding your envie.Return to template - Edit>Ungroup and delete the red rectangle- this leaves just the outlines.
Enjoy
Susibi
edited to add liner to template. The liner lines are bright pink and to print them go to cut settings and check the box next to pink and uncheck black and red
TracieB
19-12-2006, 03:59 PM
Hi Guys
I have loads of envelope templates I have done on powerpoint that I used to cut out manually.
I have been playing with my early xmas prezzie and converted them to be cut out on the Robo.
Both of them are drawn using the polyline too so you can edit all lines and resize to suit.
Haope you all have a very Merry Xmas.
Tracie x
elwoodsusanm
08-01-2007, 05:50 PM
I have made a front and back for a C5 card envelope. Again very simple I know, but it's a start, and I am feeling more at ease with the 'robo! I have made my own envelopes for a long time. I printed off outline then had to spend time with cutting knife and ruler. I usually do my envelopes to match card inner leaf.:D
Silene
23-01-2007, 09:07 PM
I have made a couple off seed envelopes wich I use to store my own collected seeds from my garden in.
Hope you like them!
ErikaP
20-07-2007, 06:59 PM
Hi,
I was asked if I could do one of these. I haven't cut it, but know someone who has, and it works
It's like the ones on C and C.
Basically you can add this embellishment to the fold side of the card, glueing the tab part to the back and folding the pretty bit onto the front. Or you can attach it to the back part at the opening edge, so it folds over the opening and acts as a closure. If you do use this option, then you can create a slot for it to slide into. This would create something like a wallet.
Drawn in Inkscape and traced and tidied in Robo.
Hope you like
ErikaP
muttles
13-08-2007, 10:02 PM
This envy I made to fit cards I make from A5 card stock DL style.
Lynn
kztmiz
09-09-2007, 08:23 PM
Thank you Erika for your round cards. I converted it to us letter size, but I needed an envelope to with it. It was too small or too big. So I made one that is just right.:rolleyes: Hope you don't mind. I used 32 lb. 12 x 12 paper, but set it up for us legal size (8.5 x 14). Still trying to learn the conversion.
sammy37
16-09-2007, 10:28 PM
Not really my design, an amalgamation of two others from Sallyannie and Muttles (hope you don't mind). They are just the right size for paper money, i intend giving them as a gift money envelopes at Christmas.
Given not my designs Personal Use only.
I did 2 passes to cut on the foiled card, which was quite thin, only one copy on the template though.
sammy
YorkieMomFlUSA
22-10-2007, 10:01 PM
Thanks to "stressed" I was able to make this template for those of you that might want it!
Pam
YorkieMomFlUSA
18-12-2007, 04:12 AM
that I just designed in Robo Master. You can place a window in it, if you like. I have cut it out of scrap paper and it cut fine....may take two swipes with heavier paper. I have some money, checks and gift certificates that I will be giving as Christmas gifts, so I am going to decorate and cut out several.
I think this is the first design I've done since those awful theives were stealing our files!!!
This time of year it will come in handy...enjoy!
Pam
cat_woman
23-01-2008, 05:15 AM
Here is my quick version of a quarter-fold envelope (4.25" x 5.5"). It's nothing spectacular. Again, you can sell things you make from it, just don't sell the template or include it in any yahoo or msn groups or collections. I've included a recipe for homemade envelope glue. Hope you can use it!
Edit: I just realized that in the preview is says half-fold, but it really is a quarter-fold. Sorry about that. Long day at work today!
kztmiz
07-03-2008, 04:56 AM
I use a lot of gift bags instead of gift wrap. But it always bothers me how the card either gets lost inside or falls off the outside. So here is my solution….a bag envelope. I will post a finished picture of the bag. But this cute so nicely I just had to share. The stitches are a little noisy when I cut them because they are so small. I used 110 lb. card stock. But I think I would use a lighter weight the next time. I also have one I worked up with an open top but it still needs some work before I post it. The scalloped rings on mounted on both sides of the flap hole. This is a quarter page card size.
~Dixie
Dempsey toppers
22-03-2008, 06:40 PM
hope this is useful, it may need resizing
Lisa
ErikaP
03-04-2008, 04:48 PM
Needed something pretty to put some money in for a wedding gift.
Here's what I came up with.
The Cartouche on the back has the couples initials done in pen, then the mat cut out with Robo and mounted on the ovals. It'll be used to seal the envelope when we find out what currency the couple want.
The writing on the front is very fine, slow speed, minimum pressure, and not thick card work well. I chose to line the front of the envelope, but it's your choice.
May be useful for someone.
ErikaP
rugersmum
12-04-2008, 07:13 PM
have fun hope some finds a use for it
cut from some cheap mirror card - and bits from the back of my cupboard :lol:
xx
elwoodsusanm
23-10-2008, 03:17 PM
Please try and tell me what is wrong with it:(
Crafty Sarah
14-11-2008, 12:12 PM
Here is my finished template (with thanks to Joyce for helping me) and some photos of the card it was made for.
A simple template (hard enough for me !) but very usefull this card was for my Nephews 14th Birthday who asked for money as a present.
Boys cards can be very difficult, so I was pleased with this little idea.
Hope you like it
Crafty Sarah x
elwoodsusanm
15-12-2008, 05:56 PM
Will this do :)
Dont forget to change red line to dotted. It is showing as a cut line and that won't do :)
Screen shot added by Lucille
elwoodsusanm
27-12-2008, 07:21 PM
For money/gift card/cheque. Decorate to suit.
becky25
26-10-2009, 01:53 PM
I have watched a number if videos on Youtube that use a similar shape to this. I have made this in Robomaster and made some little treat holders that are really sweet for Halloween, they will hold the small bags of haribo sweets or other small treats too.
I hope somebody else finds it useful.
Money envelope and the sheet if anyone can make use of them
Copyright ©2000-2010, Jelsoft Enterprises Ltd.