Cutting Bazzill

[ebj]

I have the new CR 200, and i cant get it to cut perfect in Bazzill.
Could anyone tell me witch color of the cap i shoud use?

And how mutch speed and thickness i should have on the adjust settings?

[tara2408]

I've got the CR 1 and I use the pink cap on the thickest cut on speed 5ish and it cuts perfect on Craftwork cards card and that is very thick. Hope this helps.

[ebj]

I've got the CR 1 and I use the pink cap on the thickest cut on speed 5ish and it cuts perfect on Craftwork cards card and that is very thick. Hope this helps.


I have now tried that, but it wont cut through.
Anyone with CR 200 that could help me?

[Acorn]

wel it looks like we both have the same problem.
i am trying to cut holographic card. it have done a copy and paste on top five times and it still didnt cut through. going to try some other card stock before i complain to graphtec.

let me know if you figure it out

Acorn

[silverst170]

well i dont understand i cut 270gsm card and mines
fine
must have good one

[persephone]

try setting the thick media and use a fairly slow setting. I have had o problems yet

[ebj]

Could you please tell me exactly what your settings are.

I had the Craft Robo 100 earlier, and didn't have any problems with it. I got the 200 today, and it doesn't cut all the way through. I have tried with settings for thick media and the speed setting on 2 and thickness on 33. But it still is more or less attached at some of the edges. When I try to tear it off, it is som remainder paper that I will have to cut off or tear off. My old machine cut 100% through.

I appreciate it if you could give me your settings so that I can figure out if there is something wrong with this machine.

Thank you.

[persephone]

try setting thickness to 33 and put in thick media

[Acorn]

i have tried these settigs and mine wont cut through either.
i even chose card stock which gives u a thicker setting and it stil didnt cut right through i did it five times on the holographic card and i just looked at the pack and its 200gsm.

me thinks blade is faulty or chipped.

Acorn

[stressed]

i buy all my card from the papermill shop and that includes bazzil i have the blue & silver model
i cut on thick media, pink cap, speed about 5 thickness 30 and 1 'o' ring
(the white model doesnt have o rings you have to turn your balde a qtr turn to compensate for that i believe)
mine cuts fine, some other thicker card i do same but use 2 'o'rings